Antec 900 Slimline DVD mod

Associate
OP
Joined
18 Jun 2007
Posts
1,473
Location
Cambridge, UK
1, Take Bezel off and bottom drive bay
1wincegl2.jpg


2, Drill out rivets holding bottom plate and remove
2winceku9.jpg


3, Remove plastic bracing under from bezel and mark out hole to cut out with dvd drive
3wincelj2.jpg


4, Fix foam padding to drive and connect any adapters required
4winceia1.jpg


Continued....
 
Associate
OP
Joined
18 Jun 2007
Posts
1,473
Location
Cambridge, UK
5, Fit drive using a bit of double sided carpet tape to bottom of case
5wincefh0.jpg


6, Assemble drive in case and make sure its level with front of case.
6wincevu1.jpg


7, Fit front bezel back on and your done.
7wincesv6.jpg


DeadMan
 
Last edited:
Soldato
Joined
19 Aug 2005
Posts
4,103
Location
Ealing, London
Bit of an old thread revival...Deadman, that optical drive you used, NEC Optiarc AD-7630A, is the connector normal desktop ide or is it the laptop style? I've found a nifty laptop ide to sata convertor that looks as though it'll fit the bill. A pic of the back would be mucho appreciated.
 
Back
Top Bottom