Rig/Cruncher images and specs......

Associate
Joined
29 May 2010
Posts
510
Location
SW Scotland
Here is the 'official' OcUK rig/cruncher gallery. Fill it with glorious images of your hardware.

Simple rules: Please keep the posts in the thread to pictures, specs and comments (by original poster), so it doesn't get out of hand. That's it.

Humorous pictures, and pictures if FUBARs are absolutely encouraged, but remember this is a family show!
 
Last edited:
Associate
OP
Joined
29 May 2010
Posts
510
Location
SW Scotland
CPU: AMD Phenom II 955 be
RAM: 4GB Corsair
Motherboard: MSI 790FX-GD70
GPU: 2xBFG Tech gtx285 (with Arctic Cooling Accelero Extreme coolers)
Case: Fractal Designs R2
HDD: 2xSeagate Baracuda (1TB and 250GB)
PSU: Nexus Technology 850 watt
Case fans: Noctua
Motherboard LED shroud: Hewlett Packard cardboard bookmark :D
Case work light: Pifco :D

Now, with an integral team biscuit holder (my latest, most useful mod) :D:D:D:

CIMG1862.jpg
 
Last edited:
Soldato
Joined
8 Mar 2010
Posts
7,184
Location
TBagTowers
i7 930 stock
gigabyte ud3r mobo
6gb ram
Same specs both machines 1 has 3 x gtx 470 and the other 3 x gtx 480.
Not happy with air cooling and seriously pondered water but am going to hold off for now. Going to flog the mobo out of 1 rig get gigabyte ud9 or rampage 3 shove it all in a haf x case and see how it goes. By all accounts and a few review videos a haf x can handle 4x480 on air and gives a whole lot better temps than the 800...we shall see.If it doesn't work out then i fully intend to kidnap Mr Biffa for a little Toxic watercooling workshop :D
Which reminds me....hint hint....there's 2 people with 4 slot boards just sat around.....would you not feel better knowing TBag was putting them to full use?....open 24-7 for negotiations :D


 
Soldato
Joined
8 Mar 2010
Posts
7,184
Location
TBagTowers
Not forgetting me little milkyway machine tucked away in corner
q6600
gb ud3lr
8gb ram

This ones just for milkyway though when i am 100% happy with the other 2 then this one will go, yup i know an 850w psu is overkill but rather have too much than to little and it'll allways come in handy :)
I was too cheap to buy dust filters so the side case fan is filtered with...errrr...well ladies tights actually and boy do they work well :)

 
Associate
Joined
1 May 2007
Posts
2,354
Location
London
May as well post up a couple, some of them are not very exciting. The camera on my phone is not great unless there is good natural light as you can see from the last 2 pictures.

P040810_07.260001.JPG

Dual Quad Core Xeon X5450 3Ghz @ 3.2Ghz, 8GB ECC DDR2, too many hard drives (all disconnected). Quadro FX 4500 (same as a 7800 GTX)

P040810_07.270001.JPG

Dual Xeon Dual Core 5160 3Ghz, 8GB ECC DDR2, 74GB 15k RPM SAS boot and 1TB storage, GTX 260.

P040810_07.270002.JPG

Dual Xeon Dual Core 5150 2.66Ghz, 2GB ECC DDR2, 160GB drive, Quadro NVS 440 (similar to a 7100GS).
 
Soldato
Joined
25 Sep 2008
Posts
6,767
Location
Orsett, Essex
Good thread :D

Bit dusty :(

dscf3930a.jpg


Spec:
Case: 800D
Cpu: i7 920 @3.6Ghz :( want more need a new rad
Memory: 3Gb Patriot DDR3
GPU: Zotac GTX470 & Gainward GTX260
PSU: HX850
Watercooling:
Heatkiller 3.0
240 Rad
XSPC res/pump
7/16" tubing over 1/2" barbs
Various fans controlled by Scythe Kaze Master

Will get a better picture up when I have my camera back. (Got it back :D)
 
Last edited:

rjk

rjk

Caporegime
Joined
8 Aug 2007
Posts
25,381
me and Nath were discussing the lack of a thread like this yesterday!

folding on this...

i7 970 and gtx 480

i have a ud7 in the works too, once i sell my Rampage II Extreme i will put the money towards another 480

foldy foldy :D

DSC01967.jpg

DSC01971.jpg
 

rjk

rjk

Caporegime
Joined
8 Aug 2007
Posts
25,381
its fashion over function really
the temps are abysmal because of the loop order

getting my new board in there soon and a few upgrades that are aimed at getting it folding at full tilt ;)

i will snap my work pc and a few bundles at work tomorrow to show you where im pulling all this epic pointage from
 
Soldato
Joined
14 Apr 2009
Posts
4,329
Location
Location: Location
Some sweet machines there guys, here's my little folding team:

My everyday use rig:

2x GTX260 @ 621/1512/999 + [email protected] ~20K PPD

2x260.jpg




The Shedfolder:

4x 8800GS @ 472/1674/526 (underclocked for stability in hot weather :() ~ 14-16K depending on clocks

shedfolder.jpg


Plus a ps3 which only gets involved when under threat of stompage :D
 
Man of Honour
Joined
30 Oct 2002
Posts
15,807
Location
Surrey
Mars: My general purpose home machine.
guts.jpg

Spec:
Hardware:
  • Case - Coolermaster ATCS CM201
  • PSU - Corsiar 650W (Non modular)
  • Mobo - DFi LP DK x58
  • CPU - i920 @ 3.8Ghz
  • GFX - GTX480
  • RAM - 3 x Corsair
Cooling:
  • MCR220QP Radiator
  • HK CPU Block
  • EK GPU Block
  • XSPC 750 Bay Dual Reservoir
  • Various fittings
Fans:
  • Front 2 x 80mm Redwing
  • Rear 1 x 80mm Redwing
  • Top 2 x 120mm Redwing
 
Man of Honour
Man of Honour
Joined
27 Apr 2004
Posts
107,330
Location
In bed with your sister
My current gaming rig:

7.jpg


i7 920 @ 4GHz
GTX295 @ 690/1657/1082 (core/shaders/memory).

My photo editing rig:

Photos%20rig.jpg


i7 920 @ 3.6GHz (normally at 4GHz when under water).
GTX295 @ 622/1013/1454

The res for the cooling loop split and all the fluid leaked out. Luckily, it was mounted outside the case and no damage was done but I haven't got round to fixing it yet.

I'll be doing a bit of rearranging when I get back from work next month. Haven't decided exactly what I'm going to do but I think the Gigabyte board in the photos rig will be transplanted into a new case with one or both of the 295s (or maybe even something else ;)). The Gigabyte board is a better clocker and with good cooling, it'll do 4.2GHz+. That'll be the new gaming rig and the current gaming rig will become the photo editing rig.

The Q6600 in the bedroom is Fubared just now (suspect PSU but not sure) and I don't have time to sort it before I go back to work tomorrow. It normally runs at 3.4GHz and has an 8800GTX as well. The media rig in the living room runs a Q6600 @ 3.4GHz.
 
Man of Honour
Joined
13 Nov 2009
Posts
11,595
Location
Northampton
10hvdpf.jpg


http://forums.overclockers.co.uk/showthread.php?t=18162675

Athlon II X4 @ 3.6 with unlocked L3
4Gb Geil Value
Sparkle 8800GT 600/900/1674
OCZ StealthXstreme 400w
Antec 300 w/ Window

Cooling:

XPSC Delta V3
XSPC RS120
XSPC Dual Bay Res/Pump
Ek Coolstream XT 240mm
3xXilence Redwings
1x sharkoon system 140mm
Akasa Vortexx Neo

I'm going to hang my head in shame at the mess, a new PSU and case in order at some point along with well a new rig really. Im after a Phenom X6, and an Sli capable board aswell. The EK Rad wasnt fitted in the pic above I havent got round to taking any more
 
Man of Honour
Joined
30 Oct 2002
Posts
15,807
Location
Surrey
This is gemini my home server (runs VMWare server 2.0 with three Windows server VM's)

Just upgraded it from a Q6600@stock with 8GB not crunching anything to an [email protected] folding bigadv :)

Also took the time to upgrade the watercooling, was on a Swiftech H20-120, tried a Corsair H50 but couldn't get decent temps with it :(

Anyway after that debacle, this is how it looks now:

13082010196-1.jpg


Specs:
CPU: [email protected]
RAM: 12GB DDR3 OCZ 12800
MB: P6T
Video: NVidia 7100GZ :eek:
Storage: 2x160GB RAID0 + 1TB NAS iscsi
Cooling: 1 x RS240 Rad, XSPC Delta v3 block, EK Res, EK pump, 10/8mm tubing and fittings.
Fans: 2 x YateLoon 120x25mm on the rad, 1 x 120x38mm YateLoon on rear and 1 x 120x25mm YateLoon on the front intake.
 
Last edited:
Back
Top Bottom