"So much for subtly" 2016 laptop build.

Soldato
OP
Joined
19 May 2004
Posts
3,841
20160910_223905_zpsitmw1tuj.jpg


I've redone my thermal pads as above with thermal grizzly here from OCUK. It has made my contact pretty good, there is a slight rise caused by one pad going a little rogue so i've fixed that and hopefully my results will be even better slightly. :D
 
Soldato
OP
Joined
19 May 2004
Posts
3,841
Removed some of the tape over one of the fans as I am not needing that much case airflow.

New%20Bitmap%20Image%202_zpsb3a5y6o9.jpg


(Left after mod, right before, +100/+250 to clocks)
 
Soldato
OP
Joined
19 May 2004
Posts
3,841
20160915_024431_zps1rpf8ybs.jpg



CPU delid complete, back in the machine, temps look even and pretty good on my lap with the fans not even running at idle so fingers crossed the load results are good too.
 
Soldato
OP
Joined
19 May 2004
Posts
3,841
OCUK for the thermal paste, along with the SSD.

France for the ram, it's tricky to source.

USA for the base system.

Its a build mostly because I strip it down and rebuild it tweaking as I go, the next step will be firmware.

I have power modded the cards using liquid ultra on the shunt resistors and cut a hole in the foil that was over the 2nd GPU fan.
 
Back
Top Bottom