[Project Log] "Blue Morpho"

Associate
Joined
25 Apr 2014
Posts
142
Location
Denmark
banner%20blue%20morpho_zps7y9qbqq4.jpg


It's Build Time Again !!

Hi Guys,

Finally time to start a new project!

This time i bought an In-Win D-Frame Mini case, and started brainstorming about the Design layout.
Usually when i am about to start a new project, i just go crazy on google and search for all kinds of stuff,
and this time i fell upon an image of a beautifull Blue butterfly sitting on a bunch of small white rocks..
And BOOM there it was, my head was loving the white and blue colors, and it didnt take me long to make an image collage
of all the hardware and designs i wanted for this build.

I knew i didnt just want the Red D-frame to be standard, and found some inspiration from B-negative's LUMO build (AMAZING BUILD!)..
I then contacted my good friends at Parvum Systems, and came up with a nice reservoir design to replace the existing mainboard tray.
(Rendering teaser below)

Render%20MED%20SPONSOR%20LOGOER_zpssis4x1xd.jpg


So thats the reservoir/mainboard tray idea :)
The plan is to run the tubing from the watercooled parts into the reservoir, and the water will flow through the tunnels in the
res tray, making use of as little bends and tubing as possible.

Also, I am not a big fan of just standard GPU mounting options, and like to do whatever i can to place the GPU any other place
that makes the beautifull water block visible instead.
This time i will try to flip the GPU and mount it on the PSU housing, making the GPU Waterblock fully visible.

The D-Frame mini case itself, is going to get powder coated white, or at least thats the idea so far.
maybe i will change the color later on or do something else mixing white and blue :)

That should be enough info for a start :)

Status updates and Build Progress links will be further down in this post, and will be updated everytime i upload new images :)

OOH WAIT .. allmost forgot.. the name for this project is "Blue Morpho" the name of the butterfly i found :)..

Just a small "What to come" Teaser :)

teaser_zpsqxnospha.jpg


Everything in the Blue Morpho is going to be watercooled with parts from EKWB.com, Led's and other cool stuff from Coolerkit.com,
the fluids is from Mayhems.co.uk, The Mainboard is from Gigabyte Nordic, Caseking.de and Super Flower handed over the 1000w Power Supply for this build,
And all the PSU sleeving is from MainframeCustom.com, and again Parvum Systems is the shizzle when it comes to custom parts!
Also E22.biz did some small parts for the build, the finishing touches :)

-------------------------------------------------------------------------------------------------

Progress Links :

The First Renderings
The D-Frame Mini Before Paint
The Hardware
The Sleeving
The New Gpu Mount
The Supremacy Evo and Ek-Ram Monarch x2
The EK-FC970 ACX Nickel GPU Block
The EKWB Fittings, Coolstream PE240 and GPU Backplate
The EK Vardar Fans Before Paint
Ek Vardar Fans After Paint
Monarch Module And EK-Supremacy Evo before and After paint
Mayhems Pastel Blue
Mounting the EK-Ram modules, and the EK-Ram Monarch x2
Some Goodies On The Way
The DDC Pump, And New Footstands From In Win
Painting The IN WIN D-Frame Mini
IN WIN D-Frame Mini After Paint
Gpu Mount Test, with Waterblock
Engraved And Custom Parts
Installing the engraved PSU Covers and more
Sleeving the EK-DDC Pump
Just Trying Some New Stuff
Final Renders of Res/Mobo Block Before Cut
Installing the PSU while Awaiting Parvum
FINALLY!! The Reservoir/Motherboard block has arrived!
Need Help With 24Pin Sleeving Design?!
Sleeving and Installing Blocks
Allmost Done Sleeving
Tubing Done! Ready to Fill the loop!
Done Filling The Loop, Now Bleed Testing

-------------------------------------------------------------------------------------------------

Teaser Of Latest Uploads :

Teaser%20Morpho_zpsnxypqn6d.jpg


blue%20%20morpho%20cover2_zpslok7jsnu.jpg


-------------------------------------------------------------------------------------------------

The Blue Morpho Specs :

  • Mobo: Gigabyte Ga-Z97N-WIFI
  • CPU: Intel Core i5-4690k
  • PSU: Super Flower Leadex Platinum 1000W
  • Memory: 2 x 8 GB of HyperX Fury 2133MHz
  • GPU: EVGA GTX 970 Superclocked ACX 4GB
  • SSD's: 250GB Samsung Evo 850(OS), 500GB Samsung Evo 840(Games)

Watercooling Parts :

  • Radiator: EK-CoolStream PE 240
  • Cpu Block: EK-Supremacy EVO - Nickel
  • Gpu Block: EK-FC970 GTX ACX - Nickel
  • Memory Blocks: EK-RAM Monarch X2 - Nickel and EK-RAM Monarch Module - Black (2pcs)
  • Fittings: EK-HDC Fitting 12mm G1/4 - White
  • Tubing: EK-HD Tube 10/12mm 500mm
  • Pump: EK-XTOP DDC 3.2 PWM Elite - Plexi (incl. pump)
  • Reservoir: Custom reservoir from Parvum Systems

PSU Sleeving :

  • Sleeving: MFC TELEIOS 4MM SLEEVE and MFC TELEIOS 8MM/SATA SLEEVE
  • Cable Combs: clear LC STEALTH CABLE COMBS
And off cause connectors, terminals and MFC CUSTOM 18AWG WIRE – White

And A lot of other cool stuff, Pics will follow :)

-------------------------------------------------------------------------------------------------

Hope you guys like the renders and the design Idea :)

Will be making step by step pics of painting, sleeving and everything i do.

-------------------------------------------------------------------------------------------------

This Build Is Made Possible By:

















-------------------------------------------------------------------------------------------------

Stay Awesome Bro's,

BeckModz - Liquid Designs
 
Last edited:
Associate
OP
Joined
25 Apr 2014
Posts
142
Location
Denmark
The First Renderings

Okay guys, first up is some renderings of the custom Reservoir/Mainboard tray,
that Parvum systems is currently working on for this project.
I really wanted to make a reservoir like this, to do as little bending and tubing as possible,
want to keep this build as clean as possible because of the small amount of space there is in this case. Also i want to use the backside of the reservoir/mainboard tray, as SSD mount and
also implement cable routing in it :)

Will get more renders soon i hope. If not then you just have to wait till the piece is here :D

12369822_10156314527670284_2145052240_o_zpsldqqfhus.jpg


Render%20MED%20SPONSOR%20LOGOER_zpssis4x1xd.jpg


12546140_10156434655770284_1252798473_o_zps4rqfczsr.jpg


12499513_10156434559835284_1346243596_o_zpshnbcsnqw.jpg



Am pretty happy with how this could turn out!...
I really enjoy working together with Justin and Shaun at Parvum Systems, these lads are amazing
at what they do, and allways impress me with their level of detail and skill!
Hope you like it !!
 
Associate
OP
Joined
25 Apr 2014
Posts
142
Location
Denmark
The D-Frame Mini Before Paint

Just a few images of the sexy In-Win D-Frame in it's original Red color.
Realy like the design layout of this little case, also like the red color, if i was doing a red themed build, but i'm not :)
So this good looking D-Frame Mini is heading off to powder coating!
Going to paint it white, or at least that's the idea so far :)


IMAG0510_zpsqrwdcrld.jpg


IMAG0520_zps6ncv6kmg.jpg


IMAG0511_zpsfpkqszom.jpg


IMAG0506_zpsdwjgtas7.jpg



Can't wait to get it back again, and get that GPU mount up and running on the PSU cover! :)
 
Associate
OP
Joined
25 Apr 2014
Posts
142
Location
Denmark
The Hardware

This post is all about the hardware choices.
I chose an Intel Core i5-4690k because that's plenty of brains for this small project:) And i have had several i7-4790k's so time to see how the i5-4690k does on water :)
the EVGA Gtx 970 SC was chosen, mostly because i really loved the looks of the EKWB.com waterblock that was available for it :D And i'm allways all about the looks :D
Gigabyte hit me up with their GA-z97N-wifi mainboard, sexy little powerfull thing, but think i have to mod it a bit, to make it look just a tiny bit more beautifull. :)
The PSU .. Caseking and Superflower sent me the Leadex Platinum 1000w PSU. Overkill for the other hardware but what a powerfull beauty it is.
Will show more of it when i get down to sleeving all the cables for this build :)
Anyways, here's the images of the hardware!


IMAG0264%20copy%20copy_zpslivux7ic.jpg


IMAG0358%20copy%20copy_zps5xy5cup6.jpg


IMAG0381%20copy%20copy_zps8vdarsdv.jpg


IMAG0372%20copy%20copy_zpspozk3dvu.jpg


IMAG0363%20copy%20copy_zpsqqmbhf2j.jpg


IMAG0377%20copy%20copy_zpszv8ync8b.jpg


IMAG0344%20copy%20copy_zpsv6zk6tom.jpg


IMAG0347%20copy%20copy_zpsxurqvo1b.jpg


IMAG0346%20copy%20copy_zpsg3bqrsxh.jpg


IMAG0345%20copy%20copy_zps3uoczg6w.jpg


IMAG0338%20copy%20copy_zpsdejejebs.jpg


IMAG0340%20copy%20copy_zpsbef0zp17.jpg


IMAG0311%20copy%20copy_zpsbxf0zttr.jpg


IMAG0336%20copy%20copy_zps76tufzkn.jpg


IMAG0326%20copy%20copy_zpsaagtfg7u.jpg


IMAG0324%20copy%20copy_zpskgmfp97c.jpg


IMAG0349%20copy%20copy_zpsqtzm3ifq.jpg


IMAG0352%20copy%20copy_zpsoafsymtt.jpg


Thats all for now! :)
 
Associate
OP
Joined
25 Apr 2014
Posts
142
Location
Denmark
The Sleeving

Once again David from Mainframecustom.com sent me the sleeving goodies needed for this project.
The MFC teleios sleeving looks amazing as usual, such a tight and beautifull weave.
Really the only product i've worked with that mealts that easy and allways gives a clean look, when you do heatshrinkless.
Also, all these beautiful shades of blue looks so great! Will be a hard choice when i have to decide on a color pattern for the cables.


IMAG0598_zpsipfemthv.jpg


IMAG0594_zps0mxaybng.jpg


IMAG0603_zpsowuofilb.jpg


IMAG0668_zpsl5ww7vrv.jpg


IMAG0669_zpsllp8ro2s.jpg


IMAG0680_zpsqlfhyjah.jpg


IMAG0683_zpsdxnsoaly.jpg


IMAG0685_zpswlfh0x8v.jpg


IMAG0689_zpsb9joaeab.jpg


IMAG0690_zpshbejj4ax.jpg


IMAG0696_zpsvaylm8ks.jpg


IMAG0697_zpsqwolnrta.jpg


IMAG0719_zpstff5nnnm.jpg


IMAG0692_zpsle0qjmih.jpg


IMAG0725_zpsyftn8zme.jpg



Cant wait to get all the sleeving done and installed :D. Going to look so good!
Stay Tuned !!
 
Associate
OP
Joined
25 Apr 2014
Posts
142
Location
Denmark
The New Gpu Mount

So as mentioned, I didnt like the way the GPU was sitting in the Motherboard, with the fans facing the PSU and only the backplate shown.
I chose the EVGA GTX 970 SC ACX 2.0 because it had the best looking Water Block from EKWB.com, and obviously i wanted that beautifu block to be visible in the build.
So i tried a lot of different options, trying to figure out where and how it would be best shown. And came up with mounting it on the PSU cover/mount.
I first off meassured out the hole positioning, stripped the GPU down to test mount, drilled the 3m holes and Tapped them, and then mounted the GPU to see how it looked.
I must say, I'm pretty happy with the result! Once the Water Block is attached and filled with liquid, this is going to look amazing.

IMAG0747_zpsopw8crnh.jpg


IMAG0738_zpsxzgbdop0.jpg


IMAG0744_zpsueoa8z9m.jpg


IMAG0749%20copy_zps9o0yvoui.jpg


IMAG0755%20copy_zpssht06l9k.jpg


IMAG0753%20copy_zps4pkmwheq.jpg


IMAG0763%20copy_zpsadky1vhu.jpg


IMAG0765%20copy_zpscgvsbbgf.jpg


IMAG0768%20copy_zpseahu3hjt.jpg


IMAG0784%20copy_zpscxq4sana.jpg


IMAG0777%20copy_zpshgdoqy6v.jpg


IMAG0772%20copy_zps0crtr6dg.jpg


IMAG0786_zpsqxl4fty9.jpg


IMAG0789_zps8pfssank.jpg


IMAG0775%20copy_zpsysvhjis7.jpg



Sorry i was too lazy to remove the thermal paste before taking the pics lol..
Stay Tuned !!
 
Associate
OP
Joined
25 Apr 2014
Posts
142
Location
Denmark
The Supremacy Evo and Ek-Ram Monarch x2

next up is the "BrainFreezer" also known as the CPU water block.. The Supremacy Evo Nickel, again a high level of detail and sexiness gone into this part. Just looks so clean and stylish, like all other parts from EKWB.
And the Ram cooling block, the Monarch x2, also a beauty..
Have been thinking a lot about modding the nickel plated copper parts in the edges of all the blocks, just give it another color or something, but let's se ..

IMAG0159%20copy%20copy_zpsi1guufyy.jpg


IMAG0184%20copy%20copy_zpsf7av1ntn.jpg


IMAG0171%20copy%20copy_zpssirtevc5.jpg


IMAG0607_zpsfb2yksmz.jpg


IMAG0609_zps3dxplnkv.jpg


IMAG0613_zpswsvl3aaj.jpg


IMAG0618_zpsguwb0phm.jpg


IMAG0615_zpsceoadwj0.jpg


IMAG0137%20copy%20copy_zps0hqa21cx.jpg


IMAG0150%20copy%20copy_zpslearzdrx.jpg


IMAG0634_zpsaeonyw2u.jpg


IMAG0622_zpstt6iotap.jpg


IMAG0633_zps4oiapki6.jpg


IMAG0624_zpsi7uwtnmk.jpg



Hope you like it !!
 
Associate
OP
Joined
25 Apr 2014
Posts
142
Location
Denmark
The EK-FC970 ACX Nickel GPU Block

This is the sexy GPU block i was talking about, and the main reason why i went with the GTX 970 SC from EVGA.
I mean just look at this beauty! absolutely amazing design and work by EKWB.com on this one.
Will put up more images of it later, maybe a test to see the looks with the Mayhems Fluid in it :)
Also i am thinking of maybe doing some work on the frame of the water blocks, painting them or using vinyl to make a pattern.

IMAG0530_zpss6jmonis.jpg


IMAG0558_zpslcd75j1p.jpg


IMAG0554_zpsrjm67ad2.jpg


IMAG0572_zps99rjux75.jpg


IMAG0570_zpsfacvwixs.jpg


IMAG0654_zpsgohqjfbq.jpg


IMAG0646_zpsmkfupfyv.jpg


IMAG0650_zpsfghkvov4.jpg


IMAG0641_zpsodr7xe18.jpg


IMAG0642_zpsh2nuuelh.jpg


Will put up more images when i mount the block on the GPU :)
Hope you like it !!
 
Associate
OP
Joined
25 Apr 2014
Posts
142
Location
Denmark
The EKWB Fittings, Coolstream PE240 and GPU Backplate

So here's the Radiator, the fittings and the gpu backplate.
Going to use the EK-HDC 12mm G1/4 - White fittings for this build, and try to use as little angles adapters as possible.
Will try to do all the bends in the acrylic tubing instead, to get a cleaner look.

IMAG0224%20copy_zpsjnq6sjqh.jpg


IMAG0237%20copy%20copy_zpsukhou3ht.jpg


IMAG0242%20copy%20copy_zpspbc97rmu.jpg


IMAG0256%20copy%20copy_zpsejhcaimt.jpg


IMAG0226%20copy%20copy_zpsxntqsyzc.jpg


IMAG0664_zps8ql9l0tc.jpg


IMAG0655_zpsrzdvur0w.jpg


IMAG0185%20copy%20copy_zpskca8cvl4.jpg


IMAG0192%20copy%20copy_zpsfp6m5vx0.jpg


IMAG0194%20copy%20copy_zpsqjqoh3pl.jpg


IMAG0198%20copy%20copy_zpsir4uxjmx.jpg


IMAG0205%20copy%20copy_zpsm8zphyoi.jpg


IMAG0215%20copy%20copy_zpsfnenakne.jpg


IMAG0210%20copy%20copy_zpsmz8gqvrl.jpg


IMAG0222%20copy%20copy_zps0thgz99f.jpg



Stay Tuned For More !!
 
Associate
OP
Joined
25 Apr 2014
Posts
142
Location
Denmark
The EK Vardar Fans Before Paint

Since EKWB.Com shipped me allmost everything i needed to cool his project,
i felt i had to try these beauties out. Have heard so many positive reviews on them, and decided to give them a go.
Original idea was that i wanted either dual 240mm rads, or a single 240 in push/pull, so that's the reason why there's 4 fans :)
but since my effin brain never stops getting new ideas, i decided to only use 2 of them,
and instead mount the pump on the other side of one of them :)..
Anyways, here's a few images of the beauties before i rip them apart and start painting and sleeving them :)

IMAG0286%20copy%20copy_zpsdxahnnrz.jpg


IMAG0288%20copy%20copy_zpsbhzdvvid.jpg


IMAG0291%20copy%20copy_zpsafb9zqbg.jpg


IMAG0289%20copy%20copy_zpsgwojwkbu.jpg


IMAG0297%20copy%20copy_zps6cny0zyf.jpg


IMAG0301%20copy%20copy_zps8kh19sdk.jpg


IMAG0305%20copy%20copy_zpsiuuserfe.jpg



Hope you like it !!
 
Associate
OP
Joined
25 Apr 2014
Posts
142
Location
Denmark
Ek Vardar Fans After Paint

Was not sure how i wanted the Fans to be painted.
They will not be shown much in the build, so just decided to paint the blades white instead of the stock gray color.
Also got some skye blue vinyl sticker, that i might cout out in circles and put in the middle of the fan blades later on,
Maybe when i do the sleeving of the fans.
To dissasemble the fans, i removed the sitcker, and carefully removed the small locking mechanism that holds the bearings and spacers.
Might be hard to see the difference, but there is one..


IMAG0005%20copy_zpsecun4xul.jpg


IMAG0010%20copy_zpsoouvzgpk.jpg


IMAG0015%20copy_zpse8px4jc8.jpg


IMAG0024%20copy_zpsftsmyjzu.jpg


IMAG0045%20copy_zpsk3wwi8rt.jpg


IMAG0049%20copy_zpskn68wuhj.jpg


IMAG0069%20copy_zpsymz7eehp.jpg


IMAG0071%20copy_zps6lta5kgd.jpg


IMAG0072%20copy_zpsqzgfarkj.jpg


IMAG0075%202%20copy_zpsqefnccev.jpg


IMAG0081%20copy_zpsdauifgtx.jpg




stay tuned !!
 
Associate
OP
Joined
25 Apr 2014
Posts
142
Location
Denmark
Monarch Module And EK-Supremacy Evo before and After paint

So i was unsure about if i should paint the Ram modules or not, and decided to go for the white paint.
pretty happy with the result, but can see a few air bubbles, so have to redo one of them, and will probably also change the badges to new ones later.
I used a heatgun on the EK logo badges to remove them with my knife, and then grinded them a bit with sandpaper, before primer, and white paint.
Sorry the images makes them look more gray ish, but they really are bright white..
More images will come later when i mount them on the ram sticks.

On the Supremacy Evo, I decided to paint the black mount white instead.
Original idea was to cover it with white vinyl sticker instead, but since i was allready painting the fan blades and the Monarch modules,
i thought, why the hell not, let's paint this bad boy ..
Really looks great now, with white base, white fittings, OH and will include a single image teaser of it with liquid (Mayhems Pastel Blue).


IMAG0054%20copy_zps1ghyh334.jpg


IMAG0060%20copy_zpsjveyasfy.jpg


IMAG0061%20copy_zpsqadbdcwl.jpg


IMAG0083%20copy_zpsuo2bfqw0.jpg


IMAG0085%20copy_zpsn5tz8pff.jpg


IMAG0087%20copy_zpsvwelgvht.jpg


IMAG0088%20copy_zpsgvt5xfk4.jpg


IMAG0086%20copy_zpslxifcbid.jpg


IMAG0064%20copy_zpszwyi3mjk.jpg


IMAG0128%20copy_zpsviqvb1j5.jpg


IMAG0135%20copy_zpskeacmjw6.jpg


IMAG0136%20copy_zpswwx4jxv6.jpg


IMAG0142%20copy_zpsodrodb7y.jpg


IMAG0016%20copy_zpsprummxul.jpg




Hope you like it !!
 
Back
Top Bottom