Delete this Thread Please
- Thread starter Darren_uk
- Start date
Soldato
Subbed. I love these cases. Very versatile and very clean and well made.
Love the way you can take the top, sides, bottom, inside panels out too. Makes it far easier to work on than many ITX chassis I have used.
Love the way you can take the top, sides, bottom, inside panels out too. Makes it far easier to work on than many ITX chassis I have used.
Man of Honour
I would have to change the rear case fan to green.
Hey Mickyflinn , just finishing testing the stock fan & not great & yes will change it out with another fan with blue LEDs,
Will be posting some info /pictures of the Asus fan Xpert 2 + of the RPMs
.
Last edited:
Soldato
- Joined
- 1 Dec 2015
- Posts
- 18,514
great to see there's now a top fan!
bit of an odd thing, but if you rotate the panel panel 180 so the pin holes are by the PSU you might get better cooling.
Another forum , owners tried different positions and it favoured some and not others. worth a try since it takes 30 seconds
bit of an odd thing, but if you rotate the panel panel 180 so the pin holes are by the PSU you might get better cooling.
Another forum , owners tried different positions and it favoured some and not others. worth a try since it takes 30 seconds
Associate
- Joined
- 30 Oct 2013
- Posts
- 1,777
Might just be me but I fail to see how doubling up on the middle holes works...unless you plan to put fans on opposite sides of the lid (1 outside and 1 inside)?
P.S. Looks good so far though!
P.S. Looks good so far though!
Soldato
Is the tape just to "mount" the air filters?