Screws For The Corsair H50

[imb4tman]

Does anyone know the thread size for the screws supplied with the H50 for the radiator?

Reason I ask is because the ones supplied don't seem long enough. They only clear the fan by two threads and for me that isn't secure enough, so I need to find a set at least 1cm longer.

I've already tried some local hardware stores but none stock American fine.

 

[Mougabi]

The screw thread and length are 6 x 32 x 1 1/4

#6 machine thread, 32 TPI (threads per inch), 1.25 inches in length

Here at the bottom of the page.
http://forum.corsair.com/v3/showthread.php?t=79974

 

[stulid]

Travel to Nuts and Bolts in weston.

you will find everything you need.

 

[imb4tman]

The screw thread and length are 6 x 32 x 1 1/4

#6 machine thread, 32 TPI (threads per inch), 1.25 inches in length

Here at the bottom of the page.
http://forum.corsair.com/v3/showthread.php?t=79974

Thank you.

Travel to Nuts and Bolts in weston.

you will find everything you need.

Wish I had known that earlier as I was in Winscombe but thank you, I will pop there later in the week.

 

[Andy_H]

Or, if you want to order them online:

http://www.modelfixings.co.uk/unc_cap_screws.htm

 

[imb4tman]

Or, if you want to order them online:

http://www.modelfixings.co.uk/unc_cap_screws.htm

Cheers, that will come in very useful if I can't get to the shop.

 

[C64]

I read today that people are using 2 screws on each fan when using 2 fan push pull and it's fine

 

[Mougabi]

The size you will be looking for will be

M3.5 x 0.6 x 40mm
It has a 3.5mm diameter and a thread pitch of 0.6 mm