Associate
The upgrade box is finally complete and the Q6600 has it's days numbered!
I would like some feedback on what some other people think of the configuration I'm about to do!
I'll be taking it off life support on the weekend and stripping it down ready for all the new toys Ive been squirrelling away over the last 6 weeks.....Most of it's on the signature below but a few extra points are as follows.
I'll be dropping the fuel rods in probably the following weekend fingers crossed!
Full water-cool with 1/2" high-flow fittings throughout
Had to mod one of the mosfet enzo WMST-78 and 73 blocks (small dremel mod)
Pure silicon heavy wall tube ...10mm-I.DX 16mm-O.D (3mm wall)
C/ Seagate 500GB "Momentus XT" 7200rpm.....2 off in raid0
P/ Spinpoint 500GB for storage.....................6 off in raid0
2TB-USB Desktop drive for auto-backup............ (Acronis)
With 24 GB of memory I decided a scratch probably a waste of money
MIPS X58 tri-block.................. (north,south,sata)
CPU Block SXPC RASA.............. (Lapped)
SXPC VGA full cover
Danubio 2000 UPS
PSU 750W Modular touch power.............. (Mmmmmm!)
Dell U2711 .................(Cracker of a Monitor)
Geil Cyclone cooler for memory................ (still thinking of MIPS freezer for 6 dimms)
Phobya 450 Balancer
Laing DDC limited edition pump with dampener and SANYO driver
SXPC-DDC high flow cover/top
Full cover cold plate for rear of mainboard
Gold wire modded enzo MOS-C1 and 10s for everything that's left
Feel free to ask for any details I omitted or questions relating to my description......really busy with some photo's and reviews so will get back when I can!!!
Aussie Allan
I would like some feedback on what some other people think of the configuration I'm about to do!
I'll be taking it off life support on the weekend and stripping it down ready for all the new toys Ive been squirrelling away over the last 6 weeks.....Most of it's on the signature below but a few extra points are as follows.
I'll be dropping the fuel rods in probably the following weekend fingers crossed!
Full water-cool with 1/2" high-flow fittings throughout
Had to mod one of the mosfet enzo WMST-78 and 73 blocks (small dremel mod)
Pure silicon heavy wall tube ...10mm-I.DX 16mm-O.D (3mm wall)
C/ Seagate 500GB "Momentus XT" 7200rpm.....2 off in raid0
P/ Spinpoint 500GB for storage.....................6 off in raid0
2TB-USB Desktop drive for auto-backup............ (Acronis)
With 24 GB of memory I decided a scratch probably a waste of money
MIPS X58 tri-block.................. (north,south,sata)
CPU Block SXPC RASA.............. (Lapped)
SXPC VGA full cover
Danubio 2000 UPS
PSU 750W Modular touch power.............. (Mmmmmm!)
Dell U2711 .................(Cracker of a Monitor)
Geil Cyclone cooler for memory................ (still thinking of MIPS freezer for 6 dimms)
Phobya 450 Balancer
Laing DDC limited edition pump with dampener and SANYO driver
SXPC-DDC high flow cover/top
Full cover cold plate for rear of mainboard
Gold wire modded enzo MOS-C1 and 10s for everything that's left
Feel free to ask for any details I omitted or questions relating to my description......really busy with some photo's and reviews so will get back when I can!!!
Aussie Allan
Last edited: