Stulid Tested all of OcUK Thermal Paste Range

Caporegime
Joined
17 Jan 2010
Posts
66,802
Location
weston-super-mare
Thermal paste round-up.


http://www.overclockers.co.uk was kind enough to send me a range of thermal pastes to test and report back on, what follows is my own thoughts and testing. The following pictures are of the outside packaging as you would receive it, the contents and finally the "spread-ability" + "coverage" of each paste using my own method of testing.

IMG_0589.jpg



Akasa AK-455 Thermal Compound - http://www.overclockers.co.uk/showproduct.php?prodid=TH-002-AK&groupid=701&catid=57&subcat=27

IMG_0710.jpg

IMG_0724.jpg

IMG_0802.jpg



Akasa AK-460 High Performance Thermal Compund (3.5g) - http://www.overclockers.co.uk/showproduct.php?prodid=TH-004-AK&groupid=701&catid=57&subcat=27

IMG_0598.jpg

IMG_0599.jpg

IMG_0806.jpg



Akasa TIM Kit Thermal Compound + Cleaner & Spreader - http://www.overclockers.co.uk/showproduct.php?prodid=TH-003-AK&groupid=701&catid=57&subcat=27

IMG_0730.jpg

IMG_0732.jpg



Alpenföhn "Snow Cannon" Thermalpaste (1.5g) - http://www.overclockers.co.uk/showproduct.php?prodid=TH-000-AL&groupid=701&catid=57&subcat=27

IMG_0667.jpg

IMG_0672.jpg

IMG_0822.jpg



Arctic Cooling MX-2 Thermal Compound (4g) - http://www.overclockers.co.uk/showproduct.php?prodid=TH-004-AR&groupid=701&catid=57&subcat=27

IMG_0629.jpg

IMG_0631.jpg

IMG_0790.jpg



Arctic Cooling MX-4 Thermal Compound (4g) - http://www.overclockers.co.uk/showproduct.php?prodid=TH-003-AR&groupid=701&catid=57&subcat=27

IMG_0636.jpg

IMG_0640.jpg

IMG_0797.jpg



Arctic Silver 5 Thermal Compound (3.5g) - http://www.overclockers.co.uk/showproduct.php?prodid=AC-000-AC&groupid=701&catid=57&subcat=27

IMG_0704.jpg

IMG_0808.jpg



Arctic Silver Alumina Thermal Paste (1.75g) - http://www.overclockers.co.uk/showproduct.php?prodid=TH-006-AR&groupid=701&catid=57&subcat=27

IMG_0695.jpg

IMG_0815.jpg



Arctic Silver Céramique 2 Thermal Paste (2.7g) - http://www.overclockers.co.uk/showproduct.php?prodid=TH-002-AC&groupid=701&catid=57&subcat=27

IMG_0697.jpg

IMG_0810.jpg



Cooler Master IC-Essential E1 Thermal Paste - http://www.overclockers.co.uk/showproduct.php?prodid=TH-016-CL&groupid=701&catid=57&subcat=27

IMG_0617.jpg

IMG_0620.jpg

IMG_0819.jpg



Cooler Master IC-Essential E2 Thermal Paste - http://www.overclockers.co.uk/showproduct.php?prodid=TH-017-CL&groupid=701&catid=57&subcat=27

IMG_0614.jpg

IMG_0611.jpg

IMG_0780.jpg



Cooler Master IC-Value V1 Thermal Paste - http://www.overclockers.co.uk/showproduct.php?prodid=TH-000-CM&groupid=701&catid=57&subcat=27

IMG_0623.jpg

IMG_0625.jpg

IMG_0821.jpg



Coollaboratory Liquid MetalPad - 1 x CPU Thermal Pad - http://www.overclockers.co.uk/showproduct.php?prodid=TH-007-CL&groupid=701&catid=57&subcat=27

I decided not to try test this product.

IMG_0657.jpg

IMG_0663-1.jpg



Coollaboratory Liquid Pro Liquid Metal Thermal Paste - http://www.overclockers.co.uk/showproduct.php?prodid=TH-005-CL&groupid=701&catid=57&subcat=27

IMG_0650.jpg

IMG_0652.jpg

IMG_0817.jpg



Dimastech HTX-EE Thermal Grease - Enthusiast Edition (3.5g) - http://www.overclockers.co.uk/showproduct.php?prodid=TH-000-DT&groupid=701&catid=57&subcat=27

IMG_0675.jpg

IMG_0679.jpg

IMG_0799.jpg



Gelid Solutions GC-Extreme Cutting Edge Thermal Compound (3.5g) - http://www.overclockers.co.uk/showproduct.php?prodid=TH-000-GD&groupid=701&catid=57&subcat=27

IMG_0643.jpg

IMG_0648.jpg

IMG_0784.jpg



IC Diamond 24-Carat Thermal Compound (4.8g) - http://www.overclockers.co.uk/showproduct.php?prodid=TH-001-ID&groupid=701&catid=57&subcat=27

IMG_0713.jpg

IMG_0793.jpg



IC Diamond 7-Carat Thermal Compound (1.5g) - http://www.overclockers.co.uk/showproduct.php?prodid=TH-000-ID&groupid=701&catid=57&subcat=27

IMG_0717.jpg

IMG_0795.jpg



Prolimatech PK-1 Nano Thermal Compound (5g) - http://www.overclockers.co.uk/showproduct.php?prodid=TH-000-PL&groupid=701&catid=57&subcat=27

IMG_0684.jpg

IMG_0688.jpg

IMG_0801.jpg



Prolimatech PK-2 Nano Aluminium Thermal Paste - 1,5g - http://www.overclockers.co.uk/showproduct.php?prodid=TH-003-PL&groupid=701&catid=27&subcat=

IMG_1141.jpg

IMG_1143.jpg

IMG_1148.jpg



Prolimatech PK-3 Nano Aluminium Thermal Paste - 1,5g - http://www.overclockers.co.uk/showproduct.php?prodid=TH-004-PL&groupid=701&catid=27&subcat=

IMG_1144.jpg

IMG_1145.jpg

IMG_1156.jpg



Xigmatek PTI-G3606 Thermal Grease - (3g) - http://www.overclockers.co.uk/showproduct.php?prodid=TH-000-XG&groupid=701&catid=57&subcat=27

IMG_0604.jpg

IMG_0609.jpg

IMG_0787.jpg



Test Setup.

i5 3570K @4.5GHz (45X multi and using 1.4Vcore)
Gigabyte GA-Z77X-UD5H
Antec Kuhler920 (set to silent mode)
Realtemp
Prime95



Each paste was applied using a rice grain sized blob in the center of the CPU's heatspreader and the clamping force of the Kuhler920 allowed to spread the paste, except for the Coolaboratory Liquid Pro which I followed the instructions within the packaging to apply.

I don't have a thermometer to measure the ambient temperature of my room, but the testing was done on similar days.


Spread-ability.

This is my own thoughts on how easy it was to spread a pea sized blob of each paste across a mirrored surface, I used one of the plastic spatula supplied in one of the kits and then tried to use the same amount of force to spread.

Untitled3-1.png


The Coolaboratory Liquid Pro doesn't work at all well when trying to use the CPU cooler to spread it using pressure, instead the instructions say to spread a small blob around the surface using a cotton bud or similar until the surface is like a mirror, it behaves like Mercury metal at all times and I didn't like it at all, the fact I got it to spread at all means it doesn't receive a 0


Idle temperatures.

Idle temps were recorded after leaving the PC alone for 15 mins and then the minimum temperature of all four cores added up and divided by the number of cores to give the average.

Untitledn.png



Load temperatures.

Load temps were recorded in a similar method after running Prime95 for 15 minutes, the maximum temps were again just added up and divided by the number of cores.

Untitled2-1.png



Conclusion.


Firstly lets talk about the Liquid Pro, its temperatures were good at both idle and load, but the mess it made of both the CPU's surface and Kuhler's surface was a nightmare to clean, the instructions also say that the writing on the heatspreader can be unreadable after use, luckily mine is still readable but the heatspreader surface certainly looks more dark and used after trying to clean this stuff off, even using the supplied cleaning kit isn't enough, as for the scouring pad supplied, I wouldn't dare touch either surface with it.

The Coolermaster IC-Value V1 is cheap at £2.99, but it shows with maximum temperatures way above the others.

I can not recommend the use of these thermal compounds at all.


Then we come to the £4-5 thermal pastes, the Cooler Master IC-Essential E2 being both easy to spread, a nice coverage and good temperatures.

In the £5-10 range the Gelid Solutions GC-Extreme was lovely to use and great temperatures, the Prolimatech PK-1 Nano and Alpenföhn "Snow Cannon" was nice to use also, but the temps were a tiny bit worse, an honorable mention must go to the Arctic Cooling MX-2, at £6.98 its a bargain.


If I was buying thermal paste tomorrow with my own money, the Gelid Solutions GC-Extreme or MX-2 would be first on my shopping list with the Prolimatech PK-1 Nano and Alpenföhn "Snow Cannon" following close behind.
 
Last edited:
Soldato
Joined
1 Jul 2011
Posts
8,632
Good review. Thanks.

Do get a thermometer so you can monitor ambient temp... without it you have no reference point to base results on. Your room can change 2-3c very easily. Idle temps of 31.25-34.25c a 3c variance. ;)

Still a great bit of work!
 
Last edited:
Man of Honour
Joined
26 May 2012
Posts
16,176
it doesnt seem that you accounted for thermal paste burn in...would that make any difference to the results?
great review btw xD
 
Associate
Joined
14 Oct 2004
Posts
979
@stulid i have some mx4 that is about a year old still sealed in its applicator with the cap on, will it still be ok to use?

many thanks buzz

Test some on a piece of paper. If the consistency is the same as when new it'll be fine. The only issue with old paste is when it drys out, making application and even spreading under pressure difficult.
 
Back
Top Bottom