** Water Cooling Sale**

[TwsT]

Got some stunning water blocks for Titans and 780ti's at some great prices

Click here for full range

Few examples for you

Aqua Computer Kryographics for GTX Titan Black, Grey Acrylic Glass Edition Nickel Plated @ £71.99 inc VAT

Combined GPU/RAM/VRM-cooler for graphics cards of the type nvidia GTX 780 Ti with 3072 MB RAM according to reference design.
This cooler combines the features of a graphics chip cooler and RAM-coolers in an elegant and very flat watercooler. Additionally the voltage regulators are also cooled effectively.

The kryographics for GTX 780/Titan water block offers outstanding cooling performance and a low flow resistance. All mounting threads are equipped with spacers for easy installation and to prevent twisting the graphics card. The areas contacting the GPU and RAM modules are polished for excellent heat transfer. For the voltage regulators, a thermal pad with high thermal conductivity is included.
The kryoconnect water block series features a delrin connection terminal that has a significantly reduced flow resistance compared to the previous aquagraFX series. The terminal is fastened to the water block by three screws and has G1/4 inlet and outlet ports on each side for flexible installation. Two sealing screws are supplied to seal the unused connection threads. The terminal can be replaced with kryoconnect kits for SLI configurations (art. no. 23551, 23552 or 23553, not included in delivery).

Materials:
Base part: Copper, nickel plated
Top cover: Acrylic glass with stainless steel frame
Terminal: Delrin

Scope of delivery:
cooler without connectors (screw threads G 1/4)
mounting material incl. thermally conductive pad
two sealing plugs for unused connection threads

Please note:
Graphic card and fittings are not included in delivery, please order separately. Threads are G 1/4. Thermally conductive paste is required for installation.

Was £98.99 Inc. VAT

Only £71.99 inc VAT.

ORDER NOW



Aqua Computer Kryographics for GTX 780 Ti - Black Edition @ £69.95 inc VAT

Combined GPU/RAM/VRM-cooler for graphics cards of the type nvidia GTX 780 Ti with 3072 MB RAM according to reference design.

This cooler combines the features of a graphics chip cooler and RAM-coolers in an elegant and very flat watercooler. Additionally the voltage regulators are also cooled effectively.

The kryographics for GTX 780 Ti water block offers outstanding cooling performance and a low flow resistance. All mounting threads are equipped with spacers for easy installation and to prevent twisting the graphics card. The areas contacting the GPU and RAM modules are polished for excellent heat transfer. For the voltage regulators, a thermal pad with high thermal conductivity is included.
The kryoconnect water block series features a delrin connection terminal that has a significantly reduced flow resistance compared to the previous aquagraFX series. The terminal is fastened to the water block by three screws and has G1/4 inlet and outlet ports on each side for flexible installation. Two sealing screws are supplied to seal the unused connection threads. The terminal can be replaced with kryoconnect kits for SLI configurations (art. no. 23551, 23552 or 23553, not included in delivery).

Materials:
Base part: Copper
Top cover: Acrylic glass with stainless steel frame
Terminal: Delrin

Scope of delivery:
cooler without connectors (screw threads G 1/4)
mounting material incl. thermally conductive pad
two sealing plugs for unused connection threads

Please note:
Graphic card and fittings are not included in delivery, please order separately. Threads are G 1/4. Thermally conductive paste is required for installation.

Was £98.99 Inc. VAT

Only £69.95 inc VAT.

ORDER NOW

Will be adding more items to this thread as the week continues.

 

[GiraffePencils]

Subbed encase something I need pops up

 

[subbytna]

Where's the "this week only" stuff this week?

 

[UTmaniac]

Where's the "this week only" stuff this week?

http://www.overclockers.co.uk/thisweek.php ?

 

[TwsT]

TWO should be live on the site and

LOL giraffePencils. Surprised you aren't just asking me to reduce what you need.

 

[GiraffePencils]

TWO should be live on the site and

LOL giraffePencils. Surprised you aren't just asking me to reduce what you need.

*gets out notebook*
I'm actually fairly content atm.... there's little to offer me, I need an EK PE 240mm?
But you have to have stock to offer discount
Then some monsoon fitting's to go with it 13mm acrylic matt black

 

[Kipz]

*gets out notebook*
I'm actually fairly content atm.... there's little to offer me, I need an EK PE 240mm?
But you have to have stock to offer discount
Then some monsoon fitting's to go with it 13mm acrylic matt black

Don't joke about the EK PE 240mm stock , It makes me cry inside . I'm all for you getting stock and discounting them too though haha . While you're at it how about the EK Monarch Ram blocks too .

 

[los]

Any 290 waterblocks coming up to fit a 290 tri-x?

 

[subbytna]

http://www.overclockers.co.uk/thisweek.php ?

TWO should be live on the site and

LOL giraffePencils. Surprised you aren't just asking me to reduce what you need.

Cheers lads.

 

[TwsT]

Any 290 waterblocks coming up to fit a 290 tri-x?

Which tri X is it

Hardware Labs Black ICE Radiator SR1 420 @ £64.99 inc VAT

The Black Ice® SR1-420 remains true to its roots in offering case-mod professionals the highest quality triple fan form factor radiator based on Hardware Labs' silent revision platform. The Black Ice® SR1-420 bridges the gap between ultra-stealth and extreme high performance allowing it to effectively utilize sub-1000 rpm fans and scale performance up to 2000rpm. Ultra-stealth operation with increased thermal capacity, and from the industry's standard bearer for quality and craftsmanship.


Features

• Two-pass u-flow configuration utilizing high-flow tubes for up to 40% increase in internal flow rates.
• Custom compressed core width to maximize airflow and enhance heat exchange.
• Optimized custom 9 FPI (Fins Per Inch) 45 micron copper maximized conductivity.
• Yields up to 30% more heat exchange capacity than the Black Ice® GTX in ultra-stealth operation mode up to 2000rpm.
• Built-in 15mm deep plenum for equalized core air pressure distribution.
• M4 Threaded Screw Holes for easier mounting and greater adaptability.
• Standard G 1/4" female threaded fittings.
• Full high-temper brass structural construction for weight reduction and superior corrosion resistance.
• High performance compact radiator compatible as an upgrade to the Black Ice® Xtreme III, Black Ice® GTX420 and most 3x140mm fan form factor radiators.
• Uses 100% Non-corrosive water-soluble fluxing process.
• Fully RoHS compliant.
• Full electrostatic polyurethane painting finish for uniform coating with high temperature curing for increased finish durability.
• Carbon Black Finish.
• Renowned Black Ice® quality.
• Patent Pending Design.

Dimensions
Width 153 mm
Height 460 mm
Thickness 55.9 mm

Only £64.99 inc VAT.

ORDER NOW

 

[TwsT]

EK Water Blocks EK-FC Titan Z - Acetal+Nickel @ £92.99 inc VAT

EK-FC Titan Z is a high performance full-cover water block for nVidia reference design GeForce GTX Titan Z series graphics card. Please check our Cooling Configurator online compatibility system for detailed compatibility list!

This water block directly cools the GPU, RAM as well as VRM (voltage regulation module) as water flows directly over these critical areas thus allowing the graphics card and it's VRM to remain stable under high overclocks. EK-FC Titan Z water block also features a very high flow design therefore it can be easily used in liquid cooling systems using weaker water pumps.



Base is made of nickel plated electrolytic copper while the top is made of quality POM Acetal material. The sealing is performed by quality rubber washers. Screw-in brass standoffs are pre-installed and allow for safe, painless installation procedure. Block is mounted with enclosed M2.5x4 and 2.5x6 DIN7985 screws. Block is mounted with enclosed M2.5x4 and 2.5x6 DIN7985 screws and utilizes the factory provides backplate.

EKWB recommends the purchase of aesthetic retention backplate (EK-FC Titan Z Backplate - Black) which improves the looks of your graphics cards and also provide some passive cooling to the VRM section.

EK also encloses a two-slot I/O bracket which replaces the original three-slot in order to make installation of multiple graphics cards easier.

G1/4" threaded fittings can be used on both sides of the FC terminal. Flow orientation doesn't matter and is thus not prescribed.

Up to four EK-FC Titan Z water blocks can be used on a single ATX form factor motherboard by using EK-FC Terminal (DUAL, TRIPLE or QUAD type) system or other means of interconnectivity. Please note that EK-FC Bridge & Link system is not compatible with this water block.

EK-FC Titan Z series product is also the choice of EVGA for their factory liquid cooled NVIDIA GeForce GTX Titan Z HydroCopper series graphics cards.



Enclosed:
- EK-FC Titan Z series water block
- mounting mechanism with screw-in brass standoffs
- two-slot replacement PCI I/O bracket
- thermal pads
- thermal grease EK-TIM Ectotherm (1g)

Made in Slovenia - Europe!

PLEASE NOTE:
- Due to immense variety of fittings/barbs available on market and no prescribed standards, we guarantee compatibility only for connectors bought from our web site.

Was 139.99 Inc. VAT

Only £92.99 inc VAT.

ORDER NOW


Please remember to check The watercooling Clearance section for items too new items have been added

 

[iB CoMpL3XiTy]

Any chance of a price reduction for this? http://www.overclockers.co.uk/showproduct.php?prodid=WC-633-EK&groupid=962&catid=1520&subcat=2765

 

[Mark This Day]

http://www.overclockers.co.uk/showproduct.php?prodid=WC-097-XS&groupid=962&catid=1523&subcat=152

Any chance of a discount on this please

 

[TwsT]

http://www.overclockers.co.uk/showproduct.php?prodid=WC-097-XS&groupid=962&catid=1523&subcat=152

Any chance of a discount on this please

Sadly no that's a good seller and we have more stock coming in so we're keeping that one on.

Any chance of a price reduction for this? http://www.overclockers.co.uk/showproduct.php?prodid=WC-633-EK&groupid=962&catid=1520&subcat=2765

I've dropped the price a little bit again 290's are still relevant but I doubt Rjk will be buying anymore when it runs out.

 

[los]

It is a sapphire r9 290 tri-x oc version (uefi)

 

[TwsT]

According to cooling configerator


so this should fit

EK Water Blocks EK-FC R9-290X - Acetal @ £48.00 inc VAT

EK-FC R9-290X is a high performance full-cover water block for AMD reference design Radeon R9 290X and -290 graphics card. Please check our Cooling Configurator online compatibility system for detailed compatibility list!

This water block directly cools the GPU, RAM as well as VRM (voltage regulation module) as water flows directly over these critical areas thus allowing the graphics card and it's VRM to remain stable under high overclocks. EK-FC R9-290X water block also features a very high flow design therefore it can be easily used in liquid cooling systems using weaker water pumps. The cooling engine now uses refined, 0.6mm wide microchannel structure to even further improve the heat transfer.

Base is made of electrolytic copper while the top is made of quality POM Acetal material. The sealing is performed by quality rubber washers. Screw-in brass standoffs are pre-installed and allow for safe, painless installation procedure. Block is mounted with enclosed M3x4 DIN7985 screws.

EKWB recommends the purchase of aesthetic retention backplate (EK-FC R9-290X Backplate - Black) which improves the looks of your graphics cards and also provide some passive cooling to the VRM section.

G1/4" threaded fittings can be used on both sides of the FC terminal. Flow orientation doesn't matter and is thus not prescribed.

Up to four EK-FC R9-290X water blocks can be used on a single ATX form factor motherboard by using EK-FC Terminal (DUAL, TRIPLE or QUAD type) system or other means of interconnectivity. Please note that EK-FC Bridge & Link system is not compatible with this water block.

Enclosed:
- EK-FC R9-290X series water block
- mounting mechanism with screw-in brass standoffs
- thermal pads
- thermal grease EK-TIM Ectotherm (1g)

Made in Slovenia - Europe!

Only £48.00 inc VAT.

ORDER NOW

 

[Mrnob]

Will http://www.overclockers.co.uk/showproduct.php?prodid=BG-042-XS be getting a reduction at some point? as it's still at brand new price.

 

[TwsT]

done

 

[los]

According to cooling configerator


so this should fit

EK Water Blocks EK-FC R9-290X - Acetal @ £48.00 inc VAT

EK-FC R9-290X is a high performance full-cover water block for AMD reference design Radeon R9 290X and -290 graphics card. Please check our Cooling Configurator online compatibility system for detailed compatibility list!

This water block directly cools the GPU, RAM as well as VRM (voltage regulation module) as water flows directly over these critical areas thus allowing the graphics card and it's VRM to remain stable under high overclocks. EK-FC R9-290X water block also features a very high flow design therefore it can be easily used in liquid cooling systems using weaker water pumps. The cooling engine now uses refined, 0.6mm wide microchannel structure to even further improve the heat transfer.

Base is made of electrolytic copper while the top is made of quality POM Acetal material. The sealing is performed by quality rubber washers. Screw-in brass standoffs are pre-installed and allow for safe, painless installation procedure. Block is mounted with enclosed M3x4 DIN7985 screws.

EKWB recommends the purchase of aesthetic retention backplate (EK-FC R9-290X Backplate - Black) which improves the looks of your graphics cards and also provide some passive cooling to the VRM section.

G1/4" threaded fittings can be used on both sides of the FC terminal. Flow orientation doesn't matter and is thus not prescribed.

Up to four EK-FC R9-290X water blocks can be used on a single ATX form factor motherboard by using EK-FC Terminal (DUAL, TRIPLE or QUAD type) system or other means of interconnectivity. Please note that EK-FC Bridge & Link system is not compatible with this water block.

Enclosed:
- EK-FC R9-290X series water block
- mounting mechanism with screw-in brass standoffs
- thermal pads
- thermal grease EK-TIM Ectotherm (1g)

Made in Slovenia - Europe!

Only £48.00 inc VAT.

ORDER NOW

That's absolutely great thanks, I've ordered. Although I have realised I may need a half decent 120 rad 30-40mm thick to go with it???
Along with one of these http://www.overclockers.co.uk/showproduct.php?prodid=FG-014-AL&groupid=701&catid=2331&subcat=4

 

[TwsT]

there is a reduced 120mm rad in the watercoolign section