The project has life again! I have now received the cooler, CPU and slocket. Shameless repost from Vogons:
I chose this slocket because a) it has lots of jumpers to set various frequencies and voltages and b) there isn't much choice of slockets on ebay UK. I have a Coppermine PIII 700MHz / 256k / 1.75 volts. How would I set this on the slocket and motherboard?
1) White Sliders
I assume the white sliders in blue box control the voltage, with the different settings seen in table in the second image? I understand (
http://homepage.hispeed.ch/rscheidegger ... e_faq.html) these chips are quite happy over-volting. I chose a relatively high voltage chip to minimise this potential problem.
2) Jumpers
What are the five jumpers for? What does the Auto / Manual 'option' refer to?
3) Top Right settings
At the top right of the board as seen in image 2 it lists three options
1. Dual CPU M/B
2. Over Clock
3. VCore Selectable
I can see the nearby jumper to set whether overclocking is available (I assume some kind of multiplier lock protection?) But I'm not sure where the slider / jumper is to inform the board as to whether I am running two cpus, and that I would like to manually adjust the voltage!
I've set my multiplier to 7x on the motherboard (even though it shouldn't make a difference as it's multi locked I think?)
I don't want to just mess around with it to find the right setting because i'd like to avoid accidently putting 2.4v through it!