Pre build sanity check and a couple of quick Q's

Associate
Joined
4 May 2012
Posts
1,430
Decided to go for a brand new build with full custom water using flex tube, will be adding a GPU with FC waterblock once the 3xxx seriese cards go live. I've bought a bunch of stuff off the members market and a few other places including OCUK.

Q1. Is there a best practice order for pump rads cpu gpu? will have 1 x 240 (side) 1x 360 (bottom) 1x480 (top)

Q2. did i forget anything? (plan to lift out the pump/res and remove the stopper to drain as required.

Intel EK Supremacy Evo with an AMD mount ordered seperatly.

AQUASTREAM XT USB 12V PUMP - ULTRA VERSION with aqua inlet resevoir.

Alphacool HF 13/10 compression fitting G1/4 - deep black
Item-ID.: 62365 1x - will be a short length of 10/13 from the pump as its a non G1/4 planning on going to the 240mm rad currently

Alphacool tube AlphaTube TPV 12,7/7,6 - black matte 3,3m (10ft) retail box
Item-ID.: 1016779

Alphacool HF compression fitting TPV - straight - black - 6pcs kit
Item-ID.: 1016781 2x

Alphacool tubing AlphaTube HF 13/10 (3/8"ID) - clear 1m (3,3ft) Retailbox
Item-ID.: 1013845

1 x 240 x 30
1 x 360 x 30
1x 480 - not yet ordered open to suggestions.
lots of fans

2L of coolant and 5L of distilled water for flushing

System is going to be a ryzen 5 3600 with a 3070/80 or similar wil plan to OC a bit but goal is silence.
 
Back
Top Bottom