Lian-Li PC-011 rig photos?

[loonyk]

Seems to be square? Yours looks like tubing, Only comes up with one item from China.

Yes .mine is T1018. 10mm wide, 18mm high.

 

[koooowweeee]

Yes .mine is T1018. 10mm wide, 18mm high.

Cheers pal.

Last one tho hahaha what length did you get ? Does it not seem a little expensive for a bit of plastic?

 

[koooowweeee]

I have the phanteks ones in mine, really pleased with them for the price.

Do you need a RGB header for that? My son's mobo doesn't have one

 

[loonyk]

Do you need a RGB header for that? My son's mobo doesn't have one

Right. I think i've used bit less than 2 metres of that sleeve for what i've got in my 011 dynamic.
So to get it all working i used following:
2m Sleeve - 12.49£
2m 100led/m WS2812b 5050 strip - 11.31£
Arduino leonardo micro with corsair lighting protocol (NodePro Scale) firmware plus bits and bobs ( wires, connectors) ( info about Corsair lighting protocol can be found on Github) - 7-10£
All controlled by iCue as device recognised as NodePro
Total - around 33-35£
It worked out cheaper than Phanteks can offer, and it's a snug fit (literally at the bottom fans are holding it in place tight)

 

[koooowweeee]

Right. I think i've used bit less than 2 metres of that sleeve for what i've got in my 011 dynamic.
So to get it all working i used following:
2m Sleeve - 12.49£
2m 100led/m WS2812b 5050 strip - 11.31£
Arduino leonardo micro with corsair lighting protocol (NodePro Scale) firmware plus bits and bobs ( wires, connectors) ( info about Corsair lighting protocol can be found on Github) - 7-10£
All controlled by iCue as device recognised as NodePro
Total - around 33-35£
It worked out cheaper than Phanteks can offer, and it's a snug fit (literally at the bottom fans are holding it in place tight)

Thanks pal.

But now you have sort of put me off. I might be putting a rad at the bottom. There usually a little bigger than a fan so it might not fit.

I'll be putting the rig together tomorrow so I'll have a better idea.

Thanks for the help.

 

[KungFuSpaghetti]

Do you need a RGB header for that? My son's mobo doesn't have one

I think so yeah, might be able to rig it up some way but not sure. I paid £22 for x2 40cm strip kits.

 

[Captain]

Looking at this case again, how are people powering 9 fans? My board only comes with 3 fan headers, also no room for a fan controller? Don't want them going 100% all the time.

 

[liamstears]

Just wanted to say there are some very nice builds in here, giving me plenty of ideas for when I swap over to the O11

 

[feck199]

Some very nice content here, giving lots of Ideas for how my next pc might evolve.

 

[sy-core]

Anyone know if you can fit bottom and top radiators plus the distribution plates in here. 360mm rads as well.