NR200 Owner's Thread

Soldato
Joined
22 Oct 2004
Posts
13,367
It mounts to the front of the case, for my build it's not really changed any compatibility - but I don't have any bog coolers - also it sits just above the GPU for anything that's a little longer than the 3070FE.

Here's a photo, please excuse the fact that the systems needs dusting and the cable management sorting out, it's on the to do list for one evening this week!

PXL_20210726_161524010-scaled.jpg

Sorry the image don't work, really keen to see it though.
 
Associate
Joined
4 Dec 2020
Posts
24
Guys just bought a Fuma 2 on the off chance it would fit with the TG panel and it does! Actually still has around 2mm of room to the glass with no pipes touching.

Temps in cinebench R23 Multi:
59.4c max with 23.3c ambient.

In gaming mid-high 50’s on average

Specs:
R5 5600X
Scythe Fuma 2
Strix X570i
Zotac 1660 Super
32Gb 3600mhz Vengeance RGB Pro SL
Corsair SF750
Samsung 970 Evo 1TB
2x NF-A12x25
2x Arctic P12

TDgs5Ci.jpg
 
Associate
Joined
12 Jun 2021
Posts
5
Location
Birmingham
Did anyone have trouble mounting their I/O faceplate on this?

Also my GPU input slots seem to sit higher then they should be when looking at the back of the case.

Wondering if my case is warped or a common issue
 
Soldato
Joined
18 Oct 2002
Posts
4,020
Location
Wellington, NZ
I wanted to cram my full ATX psu into this thing (without the bracket) and it's been running solid for a few weeks now..

The issue that bothers me is because the GPU is so ridiculously big it sags .. I have bought an anti sag bracket but there's no space to mount it. Does anyone else have any ideas for a bracket that will work with this case?

Cheers.

20210806-213701.jpg


20210806-213649.jpg
 
Associate
Joined
21 Jun 2016
Posts
196
Location
Stonehaven
I wanted to cram my full ATX psu into this thing (without the bracket) and it's been running solid for a few weeks now..

The issue that bothers me is because the GPU is so ridiculously big it sags .. I have bought an anti sag bracket but there's no space to mount it. Does anyone else have any ideas for a bracket that will work with this case?

Honestly, just get a bit of Lego or anything else that is about the right height. Place it at the back corner and let your GPU sit on it. You won't see it at all and it will stop the sagging.
 
Associate
Joined
9 Aug 2021
Posts
3
Location
Norway
My build:

CPU: 10600k cooled with the Alpenfön black ridge using a 140mm fan and a homemade duct to step down to 120mm size of the cooler. The CPU/MOBO gets cool air directly from the outside (side of the case).

GPU: 2080ti ROG strix, resting on yet another home made "air duct" (roughly 20mm) that ensures only cool air form the bottom of the case is sucked in by the fans.

PSU: Cooler Master sff 850w v2.

I will test the temps soon, and post a picture.
 
Associate
Joined
9 Aug 2021
Posts
3
Location
Norway
IMG-20210813-201939.jpg
IMG-20210813-202011.jpg

IMG-20210813-202409.jpg

10600k @ 80°C during CinebR23 (22°C ambient) with the Alpenfön BR and a 140mm Noctua fan. Not great, but the cooler has a somewhat limited cooling potensial.

The GPU (ASUS rog strix 2080ti) tops out at 61°C during stress testing with Time Spy.
 
Last edited:
Associate
Joined
28 Aug 2014
Posts
2,204
Did anyone have trouble mounting their I/O faceplate on this?

Also my GPU input slots seem to sit higher then they should be when looking at the back of the case.

Wondering if my case is warped or a common issue
Not the I/O.
Yes to the gpu slot and it caused me whole lot of problems. I had to take the port covers out for it to fit.

Amazing case but that had me raging like made.
 
Associate
Joined
24 Jan 2015
Posts
82
hey guys im gonna watercool my setup and had a question for the bottom 240 rad do you suggest having the 2 fans above the radiator pulling air or beneath the rad pulling air directly from under the case? and im gonna put a 92mm rad on the back and what would you suggest a alphacool 92mm 25mm thick rad with noctua 92mm 25mm pwmfan or alphacool 92mm 45mm thick rad with noctua 92mm 14mm pwm thick fan?
 
Associate
Joined
22 Sep 2011
Posts
13
Any word on a release date and price for the Max version in the UK? Thinking of getting one. Have t been into pc gaming for ages but tempted to return.
 
Soldato
Joined
1 Nov 2002
Posts
10,156
Location
Sussex
Seriously tempted to get a MAX. Love the layout. Shame you have to buy it all integrated, but hoping they will release a case only variant.
 
Back
Top Bottom