Soldato
@mrk I used 1.0mm x 15 pieces silicone cooling pad Thermal Conductive Silicone Pads (from that place) for the full length of the NVME heatsink. I have a 512GB and 2TB Gen 3x4 Silicon Power NVME drives and the thermal pads are a nice fit and the temps, with sustain heavy transfers, are fine. Not that sustained heavy transfers are a thing with my typical use. I do have a third WD Black NVME drive (1TB) to fit when I get round to it. That would disable my last two SATA ports when fitted.
You should find something like this in your manual....
which would indicate what is compromised as the slots fill up.
Does that mean, from what I understood, that the large cover over your three M2 slots does not act as a heatsink for those ports..?
So you only have a fitted heatsink on the top one..?
You should find something like this in your manual....
which would indicate what is compromised as the slots fill up.
Does that mean, from what I understood, that the large cover over your three M2 slots does not act as a heatsink for those ports..?
So you only have a fitted heatsink on the top one..?