Search results

  1. sepulchre

    New to WC; Prebuild upgrade

    @TnBDelta yes that's the leak tester. Regarding the pumps, if your going for the G1 distro EK make two variants, one with the DD 3.1 pump and one with the 3.2 pump, I've not checked to see if they make a further version with the 4.2 pump. Note the 4.2 is the same as the 3.2 but they updated to...
  2. sepulchre

    New PC for my daughter

    Thanks @EsaT ill look into those :)
  3. sepulchre

    New PC for my daughter

    OK take two considering some valuable points re the case and the PSU demands. I have a large enough bulk storage HDD, 3900x CPU and a GPU My basket at Overclockers UK: 1 x WD Blue SN550 1TB SSD NVME M.2 2280 PCIe Gen3 Solid State Drive (WDS100T2B0C)= £89.99 1 x Asus ROG Strix B550-F Gaming...
  4. sepulchre

    New PC for my daughter

    happy to do away with RGB all together
  5. sepulchre

    New PC for my daughter

    Excellent, thanks. Basket updated :)
  6. sepulchre

    New PC for my daughter

    pretty set on the case
  7. sepulchre

    New PC for my daughter

    My daughters PC is needing an update, I have a 3900x going unused and will retain her 1080 GPU and a 2TB HDD. Usage is general gaming (RDR2, COD etc) and school work, I have the following basket, anything I should change? My basket at Overclockers UK: 1 x Lian-Li O11 Dynamic Mini-S...
  8. sepulchre

    Combined NAS, Media PC help required

    Thanks @Cookie12, I looked into plex a few years ago and discounted as it didn’t support satellite cards, I checked again and incredibly it still doesn’t. I’ll take a look into the 8100. regarding os/and software I don’t believe windows really offers the level of NAS features I need but...
  9. sepulchre

    Combined NAS, Media PC help required

    Hi all, I currently have an aging NAS and an even older Windows Media PC (12+ years) both are needing to be replaced as they are noisy even after cleaning out and starting to get very slow in general usage. I'm looking at a 3U rack case to go in my network rack but beyond that I need a some...
  10. sepulchre

    ***The Official 5900X \5950X owners thread***

    awesome price for a great cpu!
  11. sepulchre

    Home wired network

    Small update to this... The local company I planned to use let me down 3 times so I'm running cable myself, a quick visit into the loft and I've found out the plasterboard is dot-dabbed so easy enough to run cables down to where needed and I've now got cable rods in place. Time to get that drum...
  12. sepulchre

    ***The Official 5900X \5950X owners thread***

    What's everyone using to OC these chips, direct bios changes or ryzen master, or something else?
  13. sepulchre

    New to WC; Prebuild upgrade

    I built a pretty similar rig to the one in your spec in an 011D-XL with EK G1 distro during lockdown and updated it to a 5900x from a 3900x and 3090FE from a 1080Ti just two weeks ago. The 5900x idles around 35-38C, 3090 FE at 27C while the loop sits at 28C, under load these hit 70C and 47C...
  14. sepulchre

    First Custom Loop with a 3080FE

    looks good! congrats on the build :)
  15. sepulchre

    Worth swapping my 3900x for a 5900x?

    I just did this upgrade today. 3900x is no slouch but after an hours gaming this evening CODMW seems to be snappier. Maybe not worth it tbh but for me this system will (hopefully) be my last upgrade until AM5 and DDR5 mature so needs to last a good couple of years.
  16. sepulchre

    SL120 and EK PE Rad - fittings issue

    Thanks for the advice :) Update - I managed to get both 3 x fans in pace by installing the fittings and tube runs first, not the easiest thing to do when they are in a case but a flexible screw driver helped. Air pressure leak tested and fine so far…. Tomorrow I’ll be putting the wb on the...
  17. sepulchre

    SL120 and EK PE Rad - fittings issue

    Hi all, I’m in the process is an upgrade (3900x -> 5900x, EK block on my 3090FE and switching fans over to SL120’s). I heard that 16mm fittings were tight on the PE rad with these fans and right enough they are. I recall someone taking a dremel to the fan nearest the fitting but can’t find...
  18. sepulchre

    Nvidia 30X0 series waterblocks

    perfect thanks. I’ll grab the first one. Nice to have one kit with everything in it. I’ve got a few scattered around in draws and can never find the bit I need!
  19. sepulchre

    Nvidia 30X0 series waterblocks

    many thanks! I am indeed missing a couple of those. Time to find a new kit...
  20. sepulchre

    Nvidia 30X0 series waterblocks

    Does anyone have a list of tools needed to disassemble the 3090 FE, specifically what size screw bits are used? Just want to make sure I have all I need before starting :)
Top