If dpd usually you can see the orders in their system by 7~8pm though it may not be collected but will say order received
Not really unfortunately
It could also be something like a cracked solder joint or wire which would be why it eventually boots as it warms up...
3d print something nice to go on the psu shroud ~nice font whurple for example
You good with cad?
Tried it a few times anything but a cube etc...
You sure owe that guy in China a few beers :D:D
And since it was mentioned
If you don't use the printer for ages
And it stops printing
To unblock it here's the way
Courtesy of a fuji film ink...
could be the graphics is on its way out then
Just be aware. Depending on your motherboard
2 x M2 may disable some sata ports
Connect it to a monitor or tv
Does it do the same?
If it's OK on external display it may just be the screen inverter
i thought the roads were dead too
but every time i go out
i get stuck behind some ******
cruising the A and B roads for 200 miles :D:D
Enjoy your build :)
thats 480mmx 60mm in push/pull on the front
i could just squeeze a 360mm on the bottom too though was tight
but changed it to a 240mm...
Though the bottom rad you have to be careful of the width
Not the thickness the size from side to side
Standard width fits but is tight...
good for you mate
mines a rescue too,couple of woman druggies
were using him as a football
yet hes turned out the gentlest cat i have ever had
had to do a double take lol
thought you had my cat in your photo
glad its sorted
and you are welcome :)
2 grand budget should be getting 3900x
3950x might be pushing the budget
Intel might get you a few more fps
Would I care about say 127fps against...
Should work fine
But good luck anyway :)
Could use the reset/refresh this pc option
I went from Intel to amd worked fine
Yes you can format later I have
Just boot it of the ssd for the moment
Mine booted Intel Windows on 3900x no problem
Separate names with a comma.