Search results

  1. davido_labido

    Orange coolant?

    Oh, I've done a fair few orange builds! probably 30 or 40 or so. I just don't take many pictures anymore I'm afraid. my favourite orange has always been Mayhems Pastel. The EKWB Orange was good too but we have currently EOL'd that. This is Mayhems with satin tubing: This is Mayhems with...
  2. davido_labido

    IMPORTANT: Members Market access

    tbh, I am mainly active in MM, but that's just because I don't really have much to add to many threads anymore. I mainly used to do the modding stuff on here and unfortunately, people don't do as much on forums as they used to. I also have a sickening amount of hardware coming and going...
  3. davido_labido

    EK questions (however, I'm not support! :P )

    Best thing to do is fire support a message! You will usually get faster support on the social media pages ;) Also, sorry for the late reply, I was in Canada for LTX.
  4. davido_labido

    CCTV Help

    nothing in the box or manual said anything about the RJ45 connectors unfortunately =(
  5. davido_labido

    CCTV Help

    I know there is the big CCTV thread - but as I don't really know what the hell I am doing, it is bringing up more confusion than help over what i *think* is a simple DVR (maybe?) swap. I have a cheapo 4k chinese camera system. The hardware was working very well, but now something has happened...
  6. davido_labido

    EK-Quantum Momentum2 ROG Strix X570-i monoblock sits unevenly on motherboard.

    haha, I have far more to put up yet, probably a good few thousand £££ worth. Just trying to figure out what I need to get rid of and what to keep :D
  7. davido_labido

    EK-Quantum Momentum2 ROG Strix X570-i monoblock sits unevenly on motherboard.

    aaah, if you have to do a lot of work for it, don't worry, if it is the same I will just pass that information on
  8. davido_labido

    EK-Quantum Momentum2 ROG Strix X570-i monoblock sits unevenly on motherboard.

    Can you take a pic with the CPU installed as well? I didn't tell the guys that there was no CPU installed and it was the first thing they enquired about.
  9. davido_labido

    EK-Quantum Momentum2 ROG Strix X570-i monoblock sits unevenly on motherboard.

    ooooou, this is a strange one - it doesn't look right that's for sure. I think for this it would actually be best to contact support as, unfortuantely, I haven't got hands on with that product. I will also fire a message to some of the R&D guys and see if they have seen anything like that...
  10. davido_labido

    EK questions (however, I'm not support! :P )

    Updated temp sensor - likely. I actually just used vinyl to change the colour of my fitting rings, works really well and means I don't have to buy multiple packs when I change colours! There are metal allen keys in products that require them. The plastic ones are to ensure people don't...
  11. davido_labido

    EK questions (however, I'm not support! :P )

    We're actually looking at the options with the thermal pads. We're already upgrading them. The main issue at the moment with the pads is that there are so many different sizes due to having so many different blocks that use them (not just GPU but motherboard, RAM, SSD blocks etc) also. It...
  12. davido_labido

    EK questions (however, I'm not support! :P )

    I'm a stokie!!! The 13th gen delid tools is having an issue with a very small number (the last number I had on the 24th march was 9 that had been RMA'd). It seems like it may be a first batch issue as it seems to be early adopters and special edition users that are having the issue. If they...
  13. davido_labido

    EK questions (however, I'm not support! :P )

    I think I have a few spare I can help ya with if needed
  14. davido_labido

    EK questions (however, I'm not support! :P )

    in the o11 with reflection 2, you shouldn't need any fittings like that, you can use the push in fittings and a 90 at the bottom, same at the top (IIRC, you might need an extension) and then for CPU and GPU there are different configurations depending on what motherboard/GPU you're using...
  15. davido_labido

    EK questions (however, I'm not support! :P )

    I've never used SignalRGB but we can give them a shout. Most of our product pages have the number of LEDs on them (there are one or two that don't have them though, I know). It wouldn't be too hard to provide this to SignalRGB if that is all required? As for the fittings - we're likely not...
  16. davido_labido

    Portable solar panel stand solution?

    I have two of the following that I use when camping (they charge a battery pack thing that in turn deals with the lighting, charging of phones and a little electric cooler thing). It all works great, I am super impressed with the setup. My main issue is that I like to move them to get the best...
  17. davido_labido

    EK questions (however, I'm not support! :P )

    Yeah, I believe at the moment we're looking into the issues with the DD blocks before shipping out more, it does seem like the thread issue on the delidding tool was only with the first batch (which, typically is the one that went to media) as we have been trying to replicate the issue and...
  18. davido_labido

    EK questions (however, I'm not support! :P )

    Pads have already started to be labelled and we're already looking at precut pads too, however, it likely won't be anytime soon that you will see that as we have a lot of pads already to get through. As for the manual, they're also on the website so you don't have to use the QR code (also, you...
  19. davido_labido

    EK questions (however, I'm not support! :P )

    we're looking at doing a Direct Die block for AMD yes. I'm not sure when it will be as we're looking into some teething problems with the Intel version at the moment, but once that is fixed, we're good to go on AMD version :)
  20. davido_labido

    EK questions (however, I'm not support! :P )

    Hey all. I've recently been visiting the forums a little more than I have in the past few years, so I figured I would drop a post here and just say that if you have any questions regarding EKWB, you're more than welcome to drop a post here and I will do my best to help. If you weren't aware, I...
Back
Top Bottom