Search results

  1. Eddie2k

    Power consumption monitoring - Home Assistant

    I've been using a Shelly EM along side Grafana in home assistant. Still needs a bit of tweaking but seems to be doing what I want it to for now. One CT round the mains and one round the heat pump, then I have two Knightsbridge smart wifi plug on the chest freezer and washing machine. I found a...
  2. Eddie2k

    Want to measure what Current im drawing

    Clamping that meter round the flex will not work - You need to clamp round only the live core of the cable You could use something like this though...
  3. Eddie2k

    Home Assistant

    The type I'm looking for is like this https://loop.homes/ where it clamps around the live outgoing wire in the consumer unit so I can monitor my heat pump. Loop looked like the best I could find but they too have stopped API access as of November
  4. Eddie2k

    Home Assistant

    Can anyone recommend a Kw/h meter that can be monitored with HA?
  5. Eddie2k

    What is your thermostat temp?

    23°C everywhere apart from bedrooms, utility & porch. Like most others I'd have this set lower but the other half is sure she lives in an igloo
  6. Eddie2k

    Home Assistant

    Only just heard about and installed home assistant the other day when searching for a way to log my heating. I have heatmiser thermostats but their app is completely useless for any kind of logging. Really happy so far my HA set up. It's purely for heating at the minute but will start...
  7. Eddie2k

    Interlinked alarms

    Also keeping in mind AICOs siting instructions
  8. Eddie2k

    Interlinked alarms

    Yes, you can supply alarms from lighting circuits. I actually prefer this way because if your mcb or rcbo trips then you would know that your alarms also aren't powered if the lights don't work. New builds, rewires tend to have a dedicated mcb/rcbo for the alarm circuit. Depending on the...
  9. Eddie2k

    Energy Suppliers

    I've just switched to Symbio Unit rate 14.928 Standing charge 14.500 Locked in for 2 years with a £25 early exit fee. Reviews don't look too promising regarding customer services and estimated bills but hopefully keeping on top of submitting meter reading everything will be fine
  10. Eddie2k

    Two way switching

    If you have a multimeter check the continuity of both of the 3 cores cables disconnected to make sure they aren't damaged or broken inside the insulation or along the route. Brown-Black Brown-Grey Should get a reading of 0.1 - 1Ω depending on the length of run. Also double check that the 3c...
  11. Eddie2k

    Interlinked alarms

    I'd be returning them as they are the 9v alkaline battery version (5 years) The new legislation states long life tamper proof lithium battery (10 years)
  12. Eddie2k

    Interlinked alarms

    Pressed enter too quickly and can't seem to edit the above post! For ease go for the AICO 600 series EI650RF Optical Smoke EI603RF Heat Alarm for kitchen This is what I install where there isn't easy access to run in new cables without lifting floors etc. All AICO alarms have a 10 year...
  13. Eddie2k

    Interlinked alarms

    For ease go for the AICO 600 series EI650RF Optical Smoke EI603RF
  14. Eddie2k

    Clipping cables to brick / exterior render

    https://www.linianclip.co.uk/product-category/all-products/
  15. Eddie2k

    Connecting sky dish to quad plex outlet

    Are you going to be using Sky Q? I have mine installed last year and the installer said he would have to bypass my Triax Multiswitch and also bypass the same wall plate that you've got as neither were compatible with Sky Q. Sky + on the other hand is Ok he said.
  16. Eddie2k

    Ambient Light Rejecting Screens

    Has anybody got any info on how good these are? http://www.sapphireav.com/Sapphire-Ambient-Light-Fixed-Frame-Screen-221cm-x-125cm_p_636.htmlhttp://www.sapphireav.com/Sapphire-Ambient-Light-Fixed-Frame-Screen-221cm-x-125cm_p_636.html I have a lot of natural light coming into the living room and...
  17. Eddie2k

    MHRV Issues

    Anyone in here knowledgeable on mechanical heat recovery ventilation systems? I have a Paul Novus 300 When I look at the wall mounted controller it says Outside air: 6.5°C Supply air 11.5°C When I check the temperature coming out of the ducting in the bedrooms is about 16°C I was expecting...
  18. Eddie2k

    True Handleless kitchens

    This kitchen was supplied by Nolte - Another german manufacture. I can send you more details if it's the style you are after. It's matt white (still had the plastic protection on when the photos were taken) with a concrete effect worktop https://postimg.cc/image/9b96vuoth/...
  19. Eddie2k

    New build completed

    Thank you! (Not sure how to enable trust or if I need certain amount of posts) I've got some samples of window tint coming so I'll see how I get on with them as id like to keep the view during the day. I've been informed by a neighbour that the windows that were put into my house which are...
  20. Eddie2k

    New build completed

    I've looked into something similar to this but the problem is the windows at the top are almost triangle shaped and not your conventional rectangle so I'm limited to the type of blinds I can use. I think this might be to way to go, I'd rather do this than paint loads of walls - Thanks!
Back
Top Bottom