HI, if happens again ... at wan>internet connection>edit>additional pppd options ... try the command
lcp-echo-interval 0
If will not connect, try instead of 0 value, 20, 30, 40, 50, 60
Users have issues to connect with ECI dslams the beta _380_2844 solve the issue ... If issue still there, a new beta for this case is out (...380_2939) with new dsl drivers
https://www.asuswebstorage.com/navigate/s/F749610F9CDF453D962101DD694D76EF4
Unless the modem not report correct, from the stats up the line has g.inp at upstream & downstream
You can try telnet command
cat /tmp/adsl/info_adsl.txt
but possibly wont make any difference to the informations
I have seen some lines that is possible to have fast at upload & inteleave at...
they just told me that a broadcom coming & seems to be high end one (maybe 4 antennas) less or more around summer (delays may happens as with the billion 8900 was expected by end of last year and was delayed few months later)
They are not giving more info on this ... but yes they have plans for...
as said by other user, seems is not ok for far lines especially in UK where there is DLM ...
but in your case you have not vdsl yet, it looks like is a risk, so a just router may be the case & will do better either with cable or vdsl
Any router only (in most cases) will allow you to have 3rd...
If you look way back, you have to make a judgement or take a chance
For some works fine, for others there is issue
You can always use it as only router but that will leave you with a Lan less due to the conversion one of the 4 lan ports into incoming wan to be as router only
And for router only...
New beta fixed max speed data
DSL-AC68U/R beta firmware v3.0.0.4.380_2844 release note as follows.
https://www.asuswebstorage.com/navigate/s/A3D8C45EFFA44497ACBD2FDC8DF6EADDY
HOW TO APPEAR TX POWER CONTROL AGAIN AT THE UI MENU
TESTING MODE ONLY
HI, Asus saying will release an enhancement firmware (seems soon) for Infineon dslams .. not sure at this point if will be for UK only (supporting downstream only) or in general infineon comparability
UPDATE ... coming soon
New feature ESNP for adsl (sudden brust of noise)
New feature via telnet command (will provided) not visible at the menu ... for setting a fixed speed rate (similar to broadcom telnet command xxxxctl configure --maxDataRate which note has not effect on vdsl perhpas...
I guess you mean by rebooting ... is different issue than the ethernet link down .. it does not reboot the modem (power on / off)
Next time (if you use the asus) try 2 possible solutions for the ethernet link down
administration > system > wps behavior > turn leds on/off > apply
Then top side...
it should be ok, just try 1 of the 2 combinations ... if your isp supports pure bridge it should be easy via pppoe... if you can change the settings at a hacked 612
I have set it with a draytek 120 which is been set with pppoe reply similar like the hg612 (also i think is set as pppoe)
30k? thousands? ... if yes then your line must have packet loss, maybe due to bad weather or not wirering or too many phone sockets in your house ... you may tell me isp modem does not have this issue but seems asus is little more sensitive with packet loss ... disable the DLA and set stability...
i think last beta/official had issue with the lan ports transferring/change them to wan ... so update to latest beta posted up ... and see this post
http://vip.asus.com/forum/view.aspx?id=20160126065002915&board_id=11&model=DSL-AC68U&page=1&SLanguage=en-us
If your isp supports pure bridge mode...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.