Search results

I think I'm going for a gt1030 or gt1050 !!! I've managed to pass my 2070 super to a virtual machine in Linux now ( the gt440 won't pass ), But found that if you disconnect the drivers from a card , that cards wattage goes up compared to a virtual machine on idle . So it uses 40 more watts with...

I think all drivers, bios etc are updated , it is a 850 watt psu and a 550 watt powered my I7 with a 2070 super, so don't think it is a power problem. Yes , in windows both card show up in device manager , but one of them has a yellow triangle . If I get one working the other stops working...

My main aim is to use my nvidia 2070 super for VM gpu passthrough in Linux, and have a nvidia gtx 440 for the host, BUT I think it is because of a problem with my two cards, not how now I have set things up. In windows only 1 of the card will work at a time !!! if the 440 works the 2070 stops...

Kububtu 19.10 is totally stable with it's default kernel which gets a AMD microcode update after install. It's been running over 12 hours now constant with a windows 10 VM running in the background. Yes it is a Gigabyte auros master x570 motherboard !!! , the only driver issue in windows is not...

Does my Windows lockup too ? , No , Well not now . I had the same problem with windows at first before I installed the chip set drivers and the nvidia drivers , now total rock solid. The only problem I get with windows is the chip set usb2 port , which on the default bios setting give me a lot...

I could not get Debian 10.x with the default kernel to show the log-in screen on kde or gnome, it would just show a blank screen. I'm trying Kubuntu right now which looks to be stable with the nvidia drivers installed, with low overheads on kde and looks nice and polished. It looks to have...

What is the most stable / best Linux distro for a AMD 3900x , having problems with random lockups , not sure if it`s the CPU or having a 2070 super which is the problem. ( Want to use pcie passthrough / vm after if I can get it stable , windows 10 under Linux ) Tried Debian and can't even get it...

I've found that on auto cpz says the idle vcore is 1.42 volt , So manual 1.2 and manual on vvc to turbo keep the vcore at 1.2 v full load.

You would think that AUTO is the safe bet , no over clocking etc , a base to start from . Setting the Vcore manually to the same value ( 1.2v ) you would think gives the same result , but increasing the voltage the 1.25v gives a better and cooler result to autos 1.2v , So AUTO may be adding a...

What screen capture are you using ? , looking at your result , mine is similar and very different.

I think i'm just chasing the rabbit , windows 10 task manager is wrong , if Hwinfo and rayzen master are correct. So it look like I'm getting 4.1ghz all cores and under 70c on amd balanced profile , which is different again to the auto setting .

it looks like I can't send a image direct , but need to host the images somewhere else. When I set the vcore to 1.2v , I'm getting 4185mhz all cores 63c ( 35c idle ), and auto says 4038mhz all cores at 81.09c But task manager say differant !!! .

Hi , I've always had problem with my 3900x on my gigabyte z570 master being to hot. With the default cooler anything other than windows 10 power saver mode would put the fan on full 747 mode. Just got a 360mm AIO cooler and found that in AMD Balanced etc , the temperature would hit 74 on idle...

Looking at Gigabyte web site for the x570 AORUS MASTER ( https://www.gigabyte.com/Motherboard/X570-AORUS-MASTER-rev-10/support#support-dl-driver-chipset ) the chip set is 549mb compared to only 50mb from the AMD web site for all AM4 motherboard (...

My chip set driver are from the gigabyte motherboard support page , so they should be the latest driver , plus gigabyte's app centre says all up to date. Wow , That was a lot of reading , I`ll try making a bios profile with all the changes and see if that profile helps at all. I'm not looking...

Hi , What's up with the Ryzen power plans ? This is how I would expect the power plans to work !!!! High Performance , Full on, set every thing to 11. Balanced , Low clocked , but fast to ramp up and slow to ramp down. Power Saving , Set the clocks to as low as possible disable the others...

I think I may have fix it !!! , it is hard to fix some thing to can`t see. So what I did what try different options and see what stopped the USB speakers from crackling . I've had my record of commander pro logged temps which is over a hour now.

Do they made a internal USB3 to internal USB2 ? , that could be a good idea . My case uses all 2 internal port , but wouldn't mind removing one if I get a usb3 with a usb2 type socket. Looking on overclocker's it has this :-...

I'm on the latest version which updated last night , but before that, it was what I downloaded from Microsoft Late October . From looking on-line at Gigabyte's forums I can see that the usb2 ports are a major problem compared to the usb3 ports, giving the same problems which I had with the...

Hi , got a Gigabyte x570 aorus master this Friday and I've had nothing but problems with it. First I spent a couple of day was trying to install a stable Windows 10. With a old GT 440 the mouse and keyboard would lock up in bios by just adding a bootable device. Found a workaround was using the...