Search results

Thanks! And it’s the film.

I was having major throttling on this card, with the junction temps hitting 110. I decided to change the pads, and found a little surprise!!! I have never seen this before! After the re-padding (thermal odyssey) I now top out at 86 degrees. All is good, but I’m astonished at the qc, or should...

Gumtree can be decent for used machines. Get decent spec for 4-500. Was a ryzen 3600 16gb with an rx580 and 250gb ssd for 400 a couple weeks ago.

My daughters got the same card. Run 80+ under load from new. Replaced paste with some proper stuff (gelid) and dropped to mid 70’s

I can post with 3733/1866IF @ cl14, but needs 1.5v and other v’s ramped up. Still unstable with that. I may try gear down mode enabled as others have suggested this helps with stability. I’d love to get the latency to be sub 65ns, but tbh I’m perfectly happy with performance and will probably...

Here you go pal https://imgur.com/0R3VhOy

are 16gb kits available in a die atm? Even if they were, they would most definitely command a premium over b die. As for world records, I think most people are just looking for high performance ram at a reasonable price.

I can only get 3600 cl14 with high v’s(1.51) stable, but use 3733 cl16 @ 1.4. I’m using ASRock X570m pro4 / 3600. Crappy board I think.

Sorry for the late reply been working a lot. I will test again and post results tonight.

I have only tried this ram, I have some old 3000 Corsair I could try but the stock timings are bad and tbh I’m happy with these. I had no luck with the xmp profiles and went full manual timings/voltage. Threepwood has had his running 3800/1900 if cl14, so he may be able to give some advice.

I have no experience with the 8 pack but people have had good results with both. The patriot will do 3200 cl12 according to one user, and if your a Ryzen user 3600/3733/3800 cl14/16 depending on your board/cpu. I can only get 3733 cl16 or 3600 cl14.

I don’t think the higher latency higher frequency patriot kits are worse than the 8 pack. The cl19 is @ 4400 1.45v. They scale down to 3600 c14 comfortably, albeit with a little Voltage tweaking. With a decent board/cpu 3800 c14 is doable and for us Ryzen users, that’s a holy grail figure with...

I like gigabyte too. My girls 2 pc’s use z170 gaming 3 and gaming 5 boards and have been rock solid for 3 years, 8 hours a day, every day!

ASRock x570m Pro4. Had to go matx for the living room pc, and I took the gamble it could do the job. Only planned on overclocking the ram not the cpu so I thought it would do. I was wrong . Hopefully a new bios might help but I’m happy enough with performance atm.

Threepwood above has hit those speeds. Ive got a 3600 non x too. I’m still at 3733/1866 cl 16 @ 1.35v. My board/bios or cpu is holding me back I think. I’ve managed 3600/1800 if cl14 now with no errors but at 1.51v. I prefer the lower v’s and I actually get slightly better latency in aida64.

Pull the trigger mate. Especially if you can push your IF to 1900 and go 3800 cl 14.

No probs. Wish I had got the 4000 instead as it seems like the same stuff!

Did not have time last night but it looks like more volts will do the trick. Hoping for a new bios update soon.

Got mine to post at 3733/1866 if cl 14 @ 1.49v unstable so I will up the juice a little. Have to manually enter VDDg/vddp as no post on auto. That is on any timings or speed. Strange issue with bios I think as I cannot enter any value below 1v on either.

Mine would not boot at all with xmp. Had to input timings from the calculator to post above 2133. And it’s on my boards qvl!