Search results

  1. Hank_Marvin

    Alternative to i5 11400f...?

    To conclude, I got hold of a 11600k and a Gigabyte B560 AORUS PRO AX for £295, now shopping around for some ram and an m.2. Thanks all.
  2. Hank_Marvin

    Alternative to i5 11400f...?

    I was hoping to re use the cooler i have, its a big Noctua twin fan, been fine with my last two intel builds so presume the mount spacing's are the same. I've never had a m-atx, they look so small :D
  3. Hank_Marvin

    Alternative to i5 11400f...?

    Thanks for the help guys. 10400 does come very close so is a good option. Pretty settled on 1080p currently and the 5700xt i have for a good few years i would think. Just thinking about losing pci-e 4 and that gen 4 m.2 slot if i go for the 10400 over an 11400 but i don't find my current pc...
  4. Hank_Marvin

    Alternative to i5 11400f...?

    i'll have a look at some gaming benchmarks to compare the 10 and 11. Would only need one m.2 really but shame to limit it. B560's seem to have two m.2's generally.
  5. Hank_Marvin

    Alternative to i5 11400f...?

    I really had my mind set on a 11400f based new PC, at £150 it seemed unmatched, but they never come in stock anywhere. Best price I've seen is £185 but made me think is there something better at that price point that isn't going to send the mobo etc upwards in price too. I was looking at the...
  6. Hank_Marvin

    Search and Destroy

    I can't quite work out if there is a one life mode or not, seems to have been so many modes arrive and leave.
  7. Hank_Marvin

    Search and Destroy

    What Sandstorm? Let me have a look, i remember getting a refund of that when it was in Beta but must be better now. Thanks
  8. Hank_Marvin

    Search and Destroy

    Any decent new'ish games out with a search and destroy mode? Like Mohaa,COD 1,2,4 with a good player base. Not CSGO though, i've got that. I think the newer cod's have it but I'm not paying £50 :D Cheers
  9. Hank_Marvin

    Road Cycling

    Thanks again, got it today :) I'll be much faster now.
  10. Hank_Marvin

    Road Cycling

    Got it all back together temporarily, no more bad noises :) , it was quite mucky so actually good to get it all cleaned up inside and round the pawls, plus the fresh bearings. Thanks for your help along the way Lethal and your kind offer also
  11. Hank_Marvin

    Road Cycling

    Haven't looked at the front but the rear ones look ok when i took it all apart. Thanks a lot, that's really kind, got me out of a muddle.
  12. Hank_Marvin

    Road Cycling

    That's the piece :), let me know if you'd part ways with it and what you'd need for it. 6903 go in the wheel hub don't they?
  13. Hank_Marvin

    Road Cycling

    Yeah it has the split but this is missing a whole side of the threaded section so can't actually use it, just tighten'ish onto axle thread. Guessing it took a impact or over tightened, likely where water and crap getting in. I saw the spacer on a youtube video but maybe it was a slightly...
  14. Hank_Marvin

    Road Cycling

    Just need to get some pliers for the clip to get broken bearings out. It's really odd, the RS-012 was inside out and broken where the bolt goes (hence why inside out i guess), so you can't do it up (expensive :( ). and R4-005 spacer is nowhere to be seen...
  15. Hank_Marvin

    Road Cycling

    No, not knocked the bearings out yet. Oh right that's why i can't see the seal. Thanks for your help.
  16. Hank_Marvin

    Road Cycling

    sorry i mean, the left hand side bearing of the freehub, maybe you'd call it the inner bearing. The two in the hub look fine, although a bit orange.
  17. Hank_Marvin

    Road Cycling

    non drive side freehub bearing knackered. seal isn't even there, and the bearings all over the shop/some warn flat. The other side is a s6803rs.
  18. Hank_Marvin

    Road Cycling

    Might just see if the guy will take them back, more hassle than its worth if the freehub is going to constantly cause issues. https://www.ebay.co.uk/itm/FULCRUM-FREEHUB-BEARING-KITS-RS-011-CHROME-STAINLESS-HYBRID-CERAMIC-X2/272658621047?hash=item3f7bb86277:g:7Y4AAOSwbURZqD-f or these I guess...
  19. Hank_Marvin

    Road Cycling

    Yeah said he's done it once a year since buying in 2018. You mean these bearings? I did read about the single sided seal, surely double sided are available? What i don't understand is, my old wheels, four years old, in all weathers and no issues :D , is the freehub used just balls and...
  20. Hank_Marvin

    Road Cycling

    Yeah, best bit is I thought I had a bargain at £70.... The chap said he replaced the bearings at xmas. Replacing them doesn't look too bad, but surely they don't need doing again? Worried it might be worse, is there much else you can resolve with the rest of the hub? There doesn't seem to be...
Back
Top Bottom