Search results

  1. UKDTweak

    ***The Official 5900X \5950X owners thread***

    Aurous X570, im on F31o, not planning to change now until they release a none Beta bios, System is stable so no need to change as far as i can see.
  2. UKDTweak

    New cpu making me loose points

    Here are a few games with built in benchmarks: The Division 2 Forza Horizon 4 F1 2019 Read Dead Redemption 2 Farcry 5 You could also try Heaven 4 or Valley benchmarks as they are more game specific
  3. UKDTweak

    Which CPU Cooler For Your Ryzen 5000?

    Yeah thats how i run the three 140mm fans in the front on my Phanteks, as not enough headers on the Aorus Elite for them and the AIO and my rear fan, so i got a cheap 3 to 1 splitter for them to run off one header as the built in fan controller in the case was rubbish and would only run the fans...
  4. UKDTweak

    Which CPU Cooler For Your Ryzen 5000?

    Or alternatively, you can buy the Artic fans separately with the normal cable lengths or any 140mm fans you prefer and swap them out with the pre fitted versions, then use whatever headers you want on the mobo to control them:)
  5. UKDTweak

    Which CPU Cooler For Your Ryzen 5000?

    That would be nice but if we could do that then id also like to see temp monitoring of the water like i could on my corsair. I did not pay much attention to connectors on the fans but did notice a plug daisy chaining them into the AIO?, perhaps they could be unplugged from it and connected to...
  6. UKDTweak

    Which CPU Cooler For Your Ryzen 5000?

    I made a slight change to the BIOS for my Artic Freezer II 280, just upped the minimum RPM a wee bit and booted into windows, its still quiet but temps at idle and while watching youtube have dropped from around 41c minimum to around 35c minimum. Seriously impressed with this AIO :)
  7. UKDTweak

    Safe voltage for 5950x

    The only issue i had with the Artic AIO was fitting, the bottom bracket would not fit with the motherboards own NVME heatsink/cover over my boot drive so i had to remove it, otherwise im happy with it so far.
  8. UKDTweak

    Safe voltage for 5950x

    It seems to be doing good, coming from the old Corsair H100i Pro 240, with the H100 my idle temp was around 45c, gaming around 66-70c depending on game and under full all core load it hit 90c Fast! With the 280 i get 39-41c idle, ran the Division 2 for a few hours lastnight, solid 63c and under...
  9. UKDTweak

    Ryzen 5950X low single core scores in Cinebench R15&R20

    In order to see higher boost clocks near the advertised clocks, you need to go into PBO and set it to Motherboard, leave the rest on auto... my 5950X was the same on My Aorus X570 Elite, at default i got around 4ghz all core and 4.4 boost, now i get 4.4 all core and over 4.6 single, not sure if...
  10. UKDTweak

    Which CPU Cooler For Your Ryzen 5000?

    Nice and love the BSG models.
  11. UKDTweak

    Safe voltage for 5950x

    I just changed out a H100I Pro for a freezer II 280 as i found the corsair lacking at the higher loads on my 5950x, if you are seeing 82c without putting a full load on the system, well... its ok.. but if you put a heavy load on all cores your temps will rocket, after 90c it will throttle and at...
  12. UKDTweak

    Safe voltage for 5950x

    Under certain loads you can see voltage spike as high as 1.5v, this is normal and will fluctuate with use and load, same as the 3000 series chips did.
  13. UKDTweak

    Which CPU Cooler For Your Ryzen 5000?

    Got my Artic Liquid Freezer II 280 lastnight... for anyone with a Phanteks P600s considering this, if like me you have all four included 140mm case fans fitted to the front of the case, then this cooler will not fit in the front replacing just two of them, you would have to remove all three...
  14. UKDTweak

    5900x help/advice

    Sounds like the bios defaulted settings, but also sounds like you got it sorted. I did not touch the thermal throttle limit, left it default.
  15. UKDTweak

    5900x help/advice

    Pretty much thats it yes, set those two and find their sweet spot then you can work on the rest, i think the Gigabyte Bios's are a bit naff at the moment as they are Beta for 5000 series, i cant get anything near what others get on other boards, if i just use the PC and check HWINFO every now...
  16. UKDTweak

    5900x help/advice

    Yes, the Stars are your best cores per CCD and the White Dots are the Second best core per CCD, so in your case you want cores 6 and 4... but be aware, that Ryzen Master, it starts counting cores from 1, your Bios may start at 0 like my Aorus Elite in which case you want to start with core 5 and...
  17. UKDTweak

    5900x help/advice

    Depends, there is a thread for Curve Optimizer on these forums, generally you set PBO to use Motherboard, then some say set scaler to x10 and boost to max 200mhz, then go into the curve and set your 2 best cores on the first CCD to -5 and test, then work your way from there. You can find you...
  18. UKDTweak

    5900x temps / voltage

    My 5950x sits around 70c while gaming and can pull upto 1.488v, in Cinebench Multi Core full load it hits 90c.. thats with PBO and a Curve setting.. without PBO it stays around 65-75 even under full load in cinebench but ive an Artic Freezer II 280 coming to hopefully help reduce temps, in your...
  19. UKDTweak

    5900x help/advice

    If your motherboard has the latest AGESA Combov2 1.1.0.0 or higher Bios version then it should be under AMD Overclocking/Precision Boost/Curve Optimizer, i had to install the latest Beta Bios for my Aorus Elite to get it. Possible other boards have it in a different section?
  20. UKDTweak

    5900x help/advice

    Go Into AMD Overclocking and set PBO to Motherboard, leave all the rest on Auto for now, reboot and test. You should get better multicore, then you can go back into the bios to the same AMD Overclocking section where in the PBO menu you should find Curve Optimizer but only if you have the...
Back
Top Bottom