Search results

There are my timings - https://ibb.co/hDHmGfP I assume if I can't get to 1900 stable then I should drop back to 1867 for everything so it is all in sync and then look at tightening my timings?

I have a 5950X on an MSI B550 Tomahawk with 4 * TeamGroup UD4-3600 16Gb sticks for a total of 64Gb. I have all BIOS settings at auto apart from the following: VSOC (1.15V) VIOD (1.05V) VCCD (1.00V) VDDP (0.95V) ProcODT (40) VDIMM (1.39V) If I set my FCLK to 1900MHz and RAM to 1867 MHZ then I...

Stock timings are here - Stock XMP are here - XMP I am also having issues where sometimes the onboard RAID will stop working, it is still set to RAID in UEFI but teh drive disappears from Windows. I have to change the mode to AHCI in UEFI then back to RAID and it works again. Unsure if thsi...

They were dual rank, same as these 8 packs

CL16

It is a 5950X in an MSI b450 tomahawk max Which voltages do you recommend adjusting first?

I have taken delivery of a 4*16Gb 8-Pack 3600 B-grade kit. When I try to activate XMP profile 1 it will not work, however profile 2 does work ok even though they are the same from what I can see. I have tried to increase the speed of this to the next setting available (1833 Mhz) but it fails...

I recently managed to get hold of a 5950X at a decent price. AS it is still an AM4 I simply replaced my 3900X with the new processor. The PC runs fine but I am just starting to overclock my RAM and whilst testing with PC MArk 10 it is just crashing my machine. I have raised a case with the...

I am curently running 4 * 16Gb Crucial Ballistix Sport LT 3200 @ 1733 Mhz, 16-18-18-36 with an AMD Ryzen 5950X. I have seen that I can get 64Gb (4*16Gb) of 8-Pack B-Die 3600 for 149.99 so am tempted but I have a couple of questions: 1) Is it worth it? I am assuming that this will clock higher...

So I have finally found what the issue is. If I leave my multiplier at auto it causes the crash. If I set it to 35 then the test runs fine. It is a 5950X running in a B450 Tomahawk Max. Has anyone else seen these sort of issues? Currently testing with multiplier set to 35 to see what my RAM...

Thanks all. Sorryt I should have mentioned my methodology. Any change I make I then run testmem5 with anta777 extreme. Providing this completes succesfully I then run 3 iterations of 3DMark demo, 3 iterations of PCMark10 demo and then 3 iterations of CineBench20. Testmem is passing fine and...

I had been using PC Mark 10 demo for testing how my RAM tiiming changes were affecting performance, however this now crashes when runing OpenCL Benchmarks and hangs my machine so badly I have to switch off the PSU to reset. What do people use to test the OC? I know about £dMark but I want...

Thanks all, I found an upgraded version of CPU-Z that now reports correctly. I'm a bit confused as I'm sure it used to auto-upgrade!

I recently found a deal for a new 5950X so snapped it up (unfortunately not at OCUK). It is all installed in my Motherboard (MSI B450 Tomahawk MAX) and seems to be detected fine by the BIOS. When I run CPU-Z it is missing some details about the processor and Aida64 is also failing to report...

I',m not going on experience here so I may be wrong, however I've looked at the spec of the board and have found the following: M.2_2 slot (Key M), type 2242/2260/2280/22110 (supports PCIe 3.0 x4 & SATA modes)** M.2_4 slot (Key M), type 2242/2260/2280 (supports PCIe 4.0 x4 mode) 4 x SATA 6Gb/s...

I'd start with testing your memory like you said, also in Windows make sure that the .NET compilation isn't running (I wouldn't expect to see this much of a slowdown on an SSD though). You can force .NET to update everything by running ngen.exe /update. You will need to do this in each of the...

I am currently on plusnet FTTC and am getting 44 Mbps down / 12Mbps up and have been quite happy with it. I have got fibreheroes in my area and can get FTTP, however there are a couple of things I am pondering. I still have a home phone line and need this in case of various peoiple needing to...

I am looking to purchase something like a 12U rack cabinet to put in my garage as this is the coolest room in the house. I have a nested lab running in a Corsair 200R case, and also a Microserver Gen 8 that I want to put in there. Where do you guys get your racks form? I've been looking...

Hi all I've finally got round to upgrading my home lab and need a new case. Due to various reasons there are certain specificatiosn that I need, namely: ATX MB compatible Must be less than 220mm wide Must have capacity for at least 1 x 5.25", 4 x 3.5" and 2 x SSD Preferably will be able to...

I am looking to get a new home lab and have found an AMD EPYC 7551P, MB and 64GB 2133 RAM on the bay. Alternatively I can buy the CPU and MB but then have to source the RAM myself. As the CPU supports up to 3200 RAM should I go for this? If I get just teh MB and CPU, then add 64GB 2666 RAM...