Please do :cool:
Are there any Current PSU's out that have the 8pin plug connection for the HD2900? Or could someone give me a link to an approprite converter please. I'm thinking if I can get a six and 8 pin connection rather than the two 6 pin connectors I'm currently using it may help ;)...
My temps under load whilst running orthos maxed out at 57Deg which is within reasonable limits I think ;) The core voltage in the bios setting being 1.475 and Asus probe reports this as being 1.42 core volts (cpuz the same).
BTW I have a freezer 7 Pro fitted.
It's a puzzling one this and I need your help to try and find out what the issue maybe. :)
I have currently got my cpu set @2.7GHz (9x300 @1.34v) and can run 3dmark06 and get around 10500 pts which is OK, @stock cpu its around 9600pts with similar core volts. Everything memory and votage...
Just installed a new 320gb WD3200AAKS but Window vista 64 doesn't seem to see it for some reason. The HDD is visable in the bios and device manager but doesn't show as an icon in my computer.
It's a sata drive so doesn't need a master/slave jumper does it?
any ideas? :confused:
Can't get orthos stable at the moment fails after about 15 secs :(
Would increasing the vcore stablise things or should I change the memory voltage from auto to 1.9v?
At least everything seems to run in windows but i'd like to get orthos to run for a reasonable amount of time before being...
Yippee, changed my timings as suggested and upped the v core and i'm now running at 3.6GHz. V core is showing 1.44 in cpuz and Asus probe and it's currently sitting at 41 deg idle.
will try orthos to see how stable it is but it's a good start. Hope my load temps aren't too high.
What is...
Gave those settings a go but no go I'm afraid. Tried varying the vcore and memory too but didn't seem to like thet either but thanks for your suggestion :)
Where do you set the memory ratio. I've just been selecting the frequency from the options as close to 800mhz is this correct.CPUz says...
The memory I have is 3GB (2x1gb & 2x512mb) geil value DDR2 PC6400 Dual channel (5-5-5-15).
If I try to go above 2.8 it wont get to the bios screen and I get no signal out to my monitor and have to switch off the psu to be able to use the C.P.R. facility and gain access to the bios settings.
Hi, Trying to overclock my E6600 but can't get it above 2.8Ghz :(
To get the above overclock on my Asus P5b Deluxe and Geil PC6400 memory my settings are:-
FSB 310
CPU Volts 1.35
Ram volts 1.85
DDR frequecy can be 775 or 930
Temps are 35deg idle and 55deg underload with current...
I'm currently running the stock cooler for my E6600 and was wondering what after market cooler is the most efficient. Looking for the best air cooler for overclocking but it doesn't have to be quiet but would be a bonus if it was;)
I have a budget of <£40 and it will be going into an Antec...
Hi,
I have just had a quick play with AMD GPU clock tool and got my His HD2900 up to 850/1000 without any trouble (10696 in 3dmark06 with lots of background apps running :D).
My temps maxed at 72deg during 3dmark06 so might have some more headroom yet.
What clocks can these cards do safely...
Hi, I'm a complete noob at overclocking and would like some help from you experienced people.
I've managed a slight overclock of 2.7GHZ by increasing the fsb to 300 (memory is than at 900) and everything else set on auto but can't seem to get any higher :(
My memory is Geil PC6400 800mhz and...
Been trying to resolve my issues with the drivers for this card.
I've done a fresh install on XP and vista (Several occasions now) and which ever driver I use I just can't get this card to operate properly in 2D let alone 3D :(
I've tried the drivers supplied with the HIS CD and the current...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.