Search results

From what I have read, I would put my money on the cpu cooler being the problem. Are the fans working? *I* would try a different cooler if poss. Edit: a new CPU might be good for testing but you will probably toast it too.

My 1600AF boosts to the max of 3.7 constantly when I undervolt. At stock it jumps around and settles at about 3.5. Does it help PBO?

Where you on an X month contract which just expired and they moved you to base rate? I thought they needed to inform you though?

As above and check voltage is correct should be 1.35v(?).

There is a great track on youtube. "The Liar tweets tonight" by Ron Zimmerman. Well worth a watch.

I had a look and the other day and if you are fine with the output selection there are plenty of options but most are out of stock. The options at this end of the market look severely limited. The 710 was released in 2014. I wouldn't spend more than about £60 on a PSU so a £50 gpu puts it in the...

Depending what you are using it for; perhaps a cheap card with the outputs you need might be a better investment. I imagine a 9800 is equivalent or worse than an igpu.

It may not be just the core temps. HWinfo64 monitors most sensors and may be worth logging everything before it crashes. PCB look ok and there is no funny smell?

fleabay > mesh filter > nylon, steel or PVC

How much is a 1660 super? None of the cards you listed are an improvement on what you have.

Gelid seem to do an am4 mounting kit. Maybe it will allow you to re-use your cooler.

MSI max range

I think Jackson was to keen too use it as an advertisement for the LOTR and deviated a bit too much. Films were ok. I quite like the battle scenes.

Lovers! (lovers in a dangerous spacetime). Needs teamplay and patience; best with 3 or more though. Magicka is good for comedy value but not very forgiving.

I would set ALL the sub timings to auto. Some are too low. Infact I would reset CMOS, follow the advice from the beginning and be more methodical.

My best effort so far. really struggling with some timings. tWTRS+tWTRL tRDWR+tWRRD (trying 5,13,7,2 atm 220% and counting) and surprisingly tCKE which doesn't want to lower to less than 5 atm. Its beginning to turn into a chore :mad: I haven't played around with the resistances and its not...

I would leave them on auto. You may need some more voltage.

Have you tried DRAM caculator for Ryzen it will have some suggestions for you. You can get the stock XMP out of thaiphoon? You'll need to raise tRCD to 17 if you want to raise the frequency and tRAS to at least 30. However your timings are pretty tight and possibly too tight for higher...

I would try 3600 mt/s at 18-20-20-40 (?) at 1.4v just to make sure the fclk can hack it. Stress test and then drop frequency on fail. Zen+ going up to 3600 is pretty lucky.

I'm in a similar position. HSBC has 1.99% 5 year no fee. I think LTV is 60%? Nationwide is 2.09% no fee iirc. Both a bit better. I have spent a bit of time comparing the deals. Usually its 10% overpayment a year on the opening balance. Get hold of excel or libre office and get to work. Start...