Search results

why run IBT which i think is a pointless program which is designed to stress all cores on my processor to 100% maximum, when in everyday programing or gaming i don't think there is anything that i use day to day that will stress all 8 cores to the maximum.

Hi here is test @4.8Ghz,room temp was 20c screenshop show x260fhd and hwmonitor temps By thetazs at 2012-05-04 By thetazs at 2012-05-04

Hi just overclocked my AMD FX8120 to 4.1GHZ and ran prime95 for 60mins,all was stable no errors & no warnings have a screenshot of the temperature below do thay look ok? or are thay to high.dont know what the max temp is on this cpu,any info would be great. By thetazs at 2012-04-28

OK i have been reading all the post on this thread and have reboot into BIOs and look into pc health status,here is a screenshot of my temperature (CPU/SYSTEM idle) By thetazs at 2012-04-27 Loaded windows and started AMD overdrive,CPUID Hardware monitor and easytune 6 and look at the...

snapshot of my pc cooling setup By thetazs at 2012-04-25

my system spec Motherboard= Gigabyte GA-990XA-UD3 AMD 990X Socket AM3/AM3+ SATA 6Gb/s USB 3.0 DDR3 ATX Motherboard - GA-990XA-UD3 Ram= Corsair Vengeance LP Blue 8GB (2x4GB) DDR3 PC3-12800 1600MHz Dual Channel Kit, Retail - CML8GX3M2A1600C9B CPU= AMD FX-8120 Black Editon 8 Core 3.1GHz...

my system spec Motherboard= Gigabyte GA-990XA-UD3 AMD 990X Socket AM3/AM3+ SATA 6Gb/s USB 3.0 DDR3 ATX Motherboard - GA-990XA-UD3 Ram= Corsair Vengeance LP Blue 8GB (2x4GB) DDR3 PC3-12800 1600MHz Dual Channel Kit, Retail - CML8GX3M2A1600C9B CPU= AMD FX-8120 Black Editon 8 Core 3.1GHz...

overclocked FX8120 @4GHZ screenshot of temp after bootup By thetazs at 2012-04-24 screenshot after running prime95 for 30mins our so no errors,no warnings By thetazs at 2012-04-24

Ok just fitted a fan infront of my HHD this is a snapshop of HWM idle [/URL][/IMG] Uploaded with ImageShack.us

Below is a screenshot of hwm & ET6 after running prime95 for over 30mins do these temps look about right? [/URL][/IMG] [/URL][/IMG]

here is a screen shot on hw monitor [/URL][/IMG]

have tried hwmonitor and core temp both read 9c all 8 cores idle and 27c under amd overdrive stability test would that be right? my system spec Motherboard= Gigabyte GA-990XA-UD3 AMD 990X Socket AM3/AM3+ SATA 6Gb/s USB 3.0 DDR3 ATX Motherboard - GA-990XA-UD3 Ram= Corsair Vengeance LP...

what is the best temperature program to use on a amd cpu? need one that will run on windows7 and will give true reading as i want to overclock it

[/URL][/IMG] 9c all 8 cores idle and 27c under stability test? my system spec Motherboard= Gigabyte GA-990XA-UD3 AMD 990X Socket AM3/AM3+ SATA 6Gb/s USB 3.0 DDR3 ATX Motherboard - GA-990XA-UD3 Ram= Corsair Vengeance LP Blue 8GB (2x4GB) DDR3 PC3-12800 1600MHz Dual Channel Kit, Retail -...

the tube is 6.4mm because thats the ID of the H50-1 tubing

Time to mod the HHD housing so that it fits around the top of the radiator and also to accommodate the reservoir.

OK more photo's of the mod after a couple of hours of drilling out rivet's. The case is finally dismantled. Time to get out the dremel, lol On the front panel remove the black wire mesh and cut out the plastic back panel behind it, then refit the mesh Job done. Now...

Time to mod my coolermaster cosmos RC1000 case, my idea is to put my 240mm rad thats at the top of the case at the moment in the front of the case, this means that i lose the HHD trays (but have got a 1TB HHD so not bothered about that) will post some photo's,