watercooling

Hi, What is the way to connect/attach this watercooling plate 25*30mm to this BLHeli ESC 70a 21*42mm to get the most cooling efficiency? Water-cooling plate (30.5x25mm): https://www.aliexpress.com/item/1005001807716093.html?skuId=12000017701193167 BLHeli ESC 70a board 21*42mm...

Hi all, I previously put together my first custom-loop under this thread: https://forums.overclockers.co.uk/threads/new-to-wc-prebuild-upgrade.18929270/ Build: Case: Lian-Li 011 XL CPU: 5900X, RAM: 32GB, GPU: MSI 3080 10G WC parts: Radiators: X2 EK Water Blocks EK-Coolstream PE360...

Ok guys, so i was wondering if you could all give me some advice I have a Lian Li XL with Bottom Rad : 1 X XE (intake lian li 120mm fans on) Top Rad: 1 X PE (exhaust lian li 120mm fans on) 1 Intake fan at the back of the case (blowing air into top rad) what would be the most beneficial for the...

i have a quick question for everyone, ive just build a LIAN LI watercooling loop, i have a rad on the bottom, one on the top and one on the side - i noticed my temps were kinda hot the top and bottom rad have fans on but the one on the side there is not space so it just acts as a passive rad...

Morning all, I am planning on draining my loop this week and give it all a good clean, once it’s rebuilt I would like to change to a nice deep purple colour. Can anyone recommend any fluids that perform well, have a good deep purple colour and are not prone to solid fall out or separation? many...

Morning Specs: Ryzen 5 3600 32Gb Ram RTX 2080 Super Aorus B550M Elite Motherboard. Lian Li O11D I have recently completed my water cooling build on this pc, 2 x 240mm Radiators 4 x 120mm Fans 1 x CPU Block 1 x GPU Block Front mounted Distro Plate EK 4.2 Elite Pump EK Mystic Fog Fluid The...

Currently in my gaming/workstation setup i have 10900k cooled with an h150i pro xt AIO and a single 3090 ftw3 (currently air cooled) with second one arriving soon and then i plan to put both into a loop. I have to use quadro rtx a6000 3 slot (yes quadro bridges work with regular RTX 3000 series...

Hi Guys So i've done all the bend and managed to make sure its all leak free but i seem to have an issue with the pump not being able to fill the loop. I have the EKWB O11D XL Distribution block in the front 2 radiators one in the top other in the bottom 2 Bitspower KFA2 HOF 3090 waterblocks...

Hello, just wondering if anyone has any ideas for improving this loop? I've had it like this since last December and never had any issues but always thought it looked abit weird/messy. I want to upgrade to some bigger tubing soon but just wanted to see if anyone had any suggestions. ignore the...

hi guys, so i tthink im having issues with my ryzen 7 5800x chip, i have a 360mm rad and a 240mm rad in a custom loop i am getting tempratures of like 38-50 idle, 65-75 degrees in games is this normal for a custom loop like mine? - ive checked the pump flow and it seems fine, ive also tried...

So I've been having problems with new CPU's running pretty warm and all of the online searches reveals that surprise to me I did not know that all 5000 series CPU's run hot, not just warm, but 80-90c hot and that was only the 5800x, i had a 3950x that i stressed tested on cinebench to 95c, but I...

Hello have just bought 2 bitspower cuboid 150 reservoirs, which i assumed came with pumps but alas they don't so i would like a recommendation on which pumps to buy please thanks in advance Ron an Kibo the dog

Hi all, recently my delidded i7 8700k is suddenly running much hotter than usual - i have replaced the thermal paste and still no luck, it is running in a custom loop with a 360mm rad what could the potential causes of this be? a dying pump? a dying chip? note my pump is making a weird noise...

Hi there! So I'm Currently looking for a new 3090 card and i have been looking at the asus strix 3090 oc but the thing is I'm going to put a EK Waterblock on it and i see people saying i will void my warranty so i found the asus 3090 EKWB but i see it only has 2x8 pin connectors compared to the...

Hi All, Being quite a young 16-year-old hardware enthusiast, and thus having only a preciously small amount of money to sped on the hobby, I have managed to build my first personal use gaming system. I spent years saving up the £50 I needed searching for free hardware and to find someone stupid...

Hello folks! I have been a long timer user of air cooled PCs and have built my computers for many years however have always shied away from water cooling. I have however put custom coolers on graphics cards and a variety of other component modifications so I have no issues with getting my hands...

Hey any ideas when there will be more stock coming in ? Recently purchased the lian li o11 dynamic and want to watercool my cpu. Cant find stock for the parts I need anywhere at a decent price.

Hey all, I'm just on the dive board about to jump into the water but need some advice first and hoping you dudes could help... I've got my main components on the way: Lian Li/EK O11D vertical-side Distro-Plate G1– Incl. Pump EK-Velocity D-RGB CPU Water Block Bykski N-GV3090GMOC-X Block for...

Hi, PC Specs OS - Dual boot of Ubuntu 20.04 and Windows 10 Case - Cougar QBX CPU - AMD Ryzen 9 3900x CPU Cooler - H100i XT ( sits on top of the case Motherboard - Asus Strix B550-I ITX GPU - 1080ti PSU - Corsair SFX 600W I recently won on ebay a 1080ti that had the G12 adaptor and a corsair...

Hi Guys Just done my first build for a few years as an upgrade from an FX8350 Ive built a 10900k System with a h150i for cooling but just want to check my temps as i cant seems to get any solid data anywhere but think they may be a little high At Idle it will sit around low 30's , When i Run...