Anyone who has a Corsair AX850 willing to help me out?

Permabanned
Joined
15 Nov 2008
Posts
6,968
I'm looking into a rebuild and modding my case, as part of this it would be handy to know exactly the distance between the modular socket on the back of the PSU and edge of the PSU, this pic shows what I mean in case I haven't explained it well enough (the red line). If anyone who has one could measure this distance for me it would be greatly appreciated

CA-028-CS_400a.jpg


Many thanks
 
I'm looking into a rebuild and modding my case, as part of this it would be handy to know exactly the distance between the modular socket on the back of the PSU and edge of the PSU, this pic shows what I mean in case I haven't explained it well enough (the red line). If anyone who has one could measure this distance for me it would be greatly appreciated

CA-028-CS_400a.jpg


Many thanks

No probs - it is about 38mm - hope this helps.

Mark
 
many thanks, think im still going to have to wait n see when I get everything if my thinking will fit, all the measurements are coming out extremely tight, lol
 
I don't own one so can only estimate from images.

The width of the top row of connectors is ~114mm.

The PSU is 150mm wide.

As the connectors appear to be centred that woulld leave ~18mm either side.

38mm appears too large if you're after the measurement from end of the connector closest to the edge of the PSU.
 
Last edited:
I don't own one so can omly estimate from images.

The width of the top row of connectors is ~114mm.

The PSU is 150mm wide.

As the connectors appear to be centred that woulld leave ~18mm either side.

38mm appears to large if you're after the measurement from end of the connector closest to the edge of the PSU.

I believe he wants connectors to top not side. ie where red line is?
 
No probs, thanks guys, more I think about it its going to be too tight to do what I was thinking, so onto plan B, lol

If youre curious what my thinking was its explained here
 
Back
Top Bottom