Biostar HP i45 RAM Config problem

[scotty365]

Hi all,

Okay, this is a bit of a big ask...

I want to configure my ram from bios for various reasons but I'm confused as to this. There are timings im not sure about and need some help to get a windows boot going.... I cant get a post atm with a manual config, there is something amiss!!!

Im running the Biostar HP i45 and the BIOS list goes -:

tCL
tRP
tRCD
tRAS
tWR - ?
tRFC - ?
tWTR
tRRD
tRTP
Write to precharge delay
Read to precharge delay - ?
Precharge all to act. delay
Precharge all refresh delay
R to W delay - ?
R to R delay (same rank) - ?
W to W delay (same rank) - ?
W to R delay (same rank) - ?
Refresh counter - ?

When I run memset (which obviously shows me working timings) I get confused where which timings go where-:

CL - 5
Ras to Cas read delay - 5
Ras to Cas Write delay - 5
tRP - 5
tRAS - 15
All precharge to act. - 6
tRFC - 44
Performance level - 7
Write to precharge delayed - 13
tWTR - 12
tRRD - 3
tRD_WR - 8
tRTP - 5
All precharge to refresh delay - 6
tREF - 2600T
CR 2T

I understand most of them but Im confused how they translate across and I cant figure a working boot.
If anyone can help me get a working windows boot then I can probably take it from there.

Regards,
Scotty


****EDIT****

These are what I think the settings are so far

tCL - 5
tRP - 5
tRCD - 5
tRAS - 15
tWR - 6
tRFC - 44
tWTR - 12
tRRD - 3
tRTP - 5
Write to precharge delay - 13
Read to precharge delay - ?
Precharge all to act. delay - 6
Precharge all refresh delay - 6
R to W delay - ?
R to R delay (same rank) - ?
W to W delay (same rank) - ?
W to R delay (same rank) - ?
Refresh counter - ?