Can't get new build working (Resolved)

Associate
Joined
10 Mar 2010
Posts
1,077
Location
London, UK
Hello lovely people!
I'm hoping someone can help.
I built a new rig from scratch - figured I'd be ok as built & upgraded my old one, but it's been a decade or so lol.

For some reason I've got case & CPU fans going, but no GPU power & no BIOS. Also no light on the keyboard or mouse so guessing they're not getting picked up.

What I've tried so far:

- Re-seated & checked all power connections
- Everything in but no GPU (HDMI straight into motherboard)
- 1 RAM only (all combinations of sticks & slots) no GPU
- Removing MB battery & waiting 30mins, then above again

Now, my PSU didn't come with 8pin + 4pin for CPU power - however I read that 8pin is sufficient if I'm not OCing, so that's how I have it. However I suspect this is the problem? If so I'll have to wait til I can get a 4pin PSU cable & try again.

Any other thoughts?

Many thanks in advance :)
Howie


The equipment:

1 X AMD Ryzen 7 7800X3D Eight Core 5.00GHz (Socket AM5) Processor - Retail
SKU: CP-3DT-AM

1 X TeamGroup Vulcan 32GB (2X16GB) DDR5 PC5-44800C36 5600MHz Dual Channel Kit - Black (FLBD532G5600HC36BDC01)
SKU: MY-0BB-TG

1 X Sapphire Radeon RX 7900 XT Pulse 20GB GDDR6 PCI-Express Graphics Card
SKU: GX-3A7-SP

1 X Corsair RMe Series RM850e Fully Modular Low-Noise ATX Power Supply v2 (CP-9020263-UK)
SKU: CA-27N-CS

1 X Seagate FireCuda 520 2TB SSD PCIe Gen4 NVMe M.2 Solid State Drive (ZP2000GV3A012)
SKU: HD-3EX-SE

1 X Asus TUF Gaming B650-Plus WIFI (Socket AM5) DDR5 ATX Motherboard
SKU: MB-6K0-AS

1 X Cooler Master Hyper 212 Halo² Black Edition CPU Cooler - 120mm
SKU: HS-090-CM

1 X Gigabyte 32" M32UC 3840x2160 4K SS VA 144Hz 1ms HDMI 2.1 HDR400 FreeSync KVM Curved Gaming Monitor
SKU: MO-00W-GI
 
Thank you all so much! Still probably the best forum on the interweb :)

- Didn't realise one of the power cables literally splits in half... Wasn't at all obvious to my untrained eye(!) So added that for the missing power.
- I did indeed have the Memory in the wrong slots. I had put them in A1 B1 and they needed to be in A2 B2 (surely the primary slots should be called "1"...). Made sure to seat them absolutely right.

That sorted the booting problem & got the GPU spinning up. Then I had the issues getting stability & the features (wifi, bluetooth) working.
- Flashing the BIOS as recommended & then some driver updates seemed to fix that (thankfully I had an ethernet cable spare, though a short one, so set it up in the other room lol)

So now it's alive and kicking bottom!

Thanks again, very happy bunny :)

Cheers,
Howie
 
Back
Top Bottom