Soldato
Its a good fan. I got the Blue led version for my antec 1200. I recommend the blue one, it lights up my whole room lol.
Cool Story Bro!
- Thread starter Ace Modder
- Start date
Associate
How this compare to standard ANTEC1200 fans?
They are very similiar - just no LED. So I wouldn't buy as an upgrade.
Associate
I bought six 120mm NoiseBlocker fans for my Corsair Obsidian 800D, I did ask OcUK if they were going to get them, they didn't.
They are quite expensive, but are so good, reliable and German
They are quite expensive, but are so good, reliable and German
Man of Honour
I've had a blue LED version of one of these fail, but that was probably just bad luck. They are indeed quiet on the low setting, and OK on the mid.
I meant for cooling performance, as they are the same
Associate
Managed to get to my 250 posts and ordered some of these today 
Soldato
Can't you do a lovely deal like this on 140mm ones too? 
Caporegime
What's the CFM?
Soldato
Dimensions 120 x 120 x 25.4 mm
Rated Voltage DC 12V
RPM 1200 1600 2000
CFM 39 56 79
dBA 25 28 30
Low 1200rpm 25dB
Med 1600rpm 28dB
high 2000rpm 30dB
Ive had these on my old Antec 1200 and found them loud on medium or high.
Of course i did have 5-6 of them mind
Rated Voltage DC 12V
RPM 1200 1600 2000
CFM 39 56 79
dBA 25 28 30
Low 1200rpm 25dB
Med 1600rpm 28dB
high 2000rpm 30dB
Ive had these on my old Antec 1200 and found them loud on medium or high.
Of course i did have 5-6 of them mind
Soldato
I ordered 2 and had them delivered on Saturday - one has an LED and one doesnt
Associate
Orderd 4 of them, didn't know they had such a high dB rating on all settings D: hope they're atleast more quiet than my current ones.
Associate
Received the two I ordered this morning.
No 3 pin connector on either but meh not too fussed about that.
#1 - 1 molex connector, 1 selector switch for L/M/H, 3 blue LED's.
#2 - 1 molex connector, 1 variable resistor with small twister, 3 blue LED's.
Very pleased
No 3 pin connector on either but meh not too fussed about that.
#1 - 1 molex connector, 1 selector switch for L/M/H, 3 blue LED's.
#2 - 1 molex connector, 1 variable resistor with small twister, 3 blue LED's.
Very pleased
Soldato
Got mine today... Not impressed with the blue LEDs, didn't say in the item description that they had LEDs - plus the picture in the item description is a non-LED one
Most would be happy with the unexpected LEDs but I've got all my LEDs red, so a blue lit fan looks a bit gay, not a big issue as a pair of snips makes it a non-LED fan easilly enough, but still annoying
Before I butcher it, would you guys be willing to replace it with a non-lit fan? or a red LED one would be better?
>edit<
Just re-read the thread:
Most would be happy with the unexpected LEDs but I've got all my LEDs red, so a blue lit fan looks a bit gay, not a big issue as a pair of snips makes it a non-LED fan easilly enough, but still annoying
Before I butcher it, would you guys be willing to replace it with a non-lit fan? or a red LED one would be better?
>edit<
Just re-read the thread:
Associate
[timko];18419039 said:
Mine are both totally black. The blades/housing are black, molex is black and the speed adjusters are also black.
Picture here
Last edited:
Soldato
^^ Mine's the same
Incidentally - did anyone get one without LEDs that would've liked one WITH LEDs?
Drop me a message and we can swap if you like...
Incidentally - did anyone get one without LEDs that would've liked one WITH LEDs?
Drop me a message and we can swap if you like...
Last edited: