Corsair 600T and H100..which fan direction

Soldato
Joined
18 Jun 2005
Posts
3,434
So if you install a H100 into the 600T with the 2 fans above the rad (fans basically positioned outside the case under the top cover); is it best to have the fans exhausting hot air from inside the case through the rad (pull config), or have the fans blowing cold air through the rad into the case.

The 600T would be configured with the rear 120mm as exhaust and up to 4 fans as intakes on the sidemesh panel.

Thanks
 
Last edited:
With the side as intake as well as the front I'd have the H100 as an exhaust so in pull config as you'll have plenty of cool air being brought in already. Also more intakes = more dust, especially as the H100 won't be filtered.
 
Thanks. That's what I thought.

From what I've read it's better to have more intakes than outtakes (assuming your intakes are filtered :)), as negative pressure from having more outtakes causes the fans to pull air in through every nook and cranny.
 
Back
Top Bottom