Corsair 600T with H100i

Associate
Joined
15 Nov 2010
Posts
668
Hey guys,

Im looking at getting the 600T case with a H100i cooler.
But I have seen some people have issues with the cooler fitting in the top as it touches the ram.
So if I install the cooler on the top, and use the fans in the top extra cover section will the H100i still function just as well?
As the fans will be separated by the mesh that will be between the fans and the radiator.

Also would you have the 2 fans in the top cover sucking air down into the case, or sucking air through the radiator and out?
 
Associate
Joined
15 Nov 2011
Posts
1,535
Location
Oxford
i have a 600t n a H100 should fit fine, might run into problems if u want a push pull system. if u put fans in the top it will be fine

would have it taking air out of the case as heat rises.
 
Soldato
Joined
22 Oct 2008
Posts
10,920
Location
Belfast
sucking hot air out...therefore also sucking cooler in via the front intake fan.

I've got that case and it's decent if you bin the stock fans and get decent fans to go with it.
 
Associate
OP
Joined
15 Nov 2010
Posts
668
And what about performance issues?
As in will it perform worse as there is a mesh in-between, and also the fans are not making a tight connection with the radiator?
 
Associate
Joined
15 Nov 2011
Posts
1,535
Location
Oxford
And what about performance issues?
As in will it perform worse as there is a mesh in-between, and also the fans are not making a tight connection with the radiator?

nah it'll be fine. the air has got to travel through the mesh which ever side you put the fans
 
Top Bottom