E6600 & Abit IP35 Pro XE - Settings to try?

Master Skooter · 23 Feb 2009 at 20:10

Hiya

Just upgraded my board, cooler & video card.

Abit IP35 Pro XE.
E6600 cooled by Arctic Freezer 7
Video is 4850.
2Gig (2x1) PC5300 Crucial Ballistix
Tagan 480W.

I appriciate that E6600's are old hat, but wondered if anone could suggest some settings to try?

Cheers
Scott

Master Skooter · 25 Feb 2009 at 18:52

Nobody?

freddie64 · 26 Feb 2009 at 12:27

Could try 9x378Mhz to get 3.4Ghz. I had to use 1.4v to get Orthos stable.
(This worked for me but may not for you)
I would read the overclocking stickies though.

ConTRo13R · 26 Feb 2009 at 12:30

Well you have a great oc'ing chipset there with the p35 and the E6600 are known to go quite high too.

They say there old just only because there 65nm, performance wise they arent old

freddie64 · 26 Feb 2009 at 12:55

Your not wrong there, it's more robust as well.

shadowscotland · 26 Feb 2009 at 15:21

My E6600 is still going strong - 3.6 was most I've had it too - 400x8 and 376x9 where my usually clocks with a IP35 pro. Cpu at 1.35 bios (1.45 windows) with .1v on the NB and 2.05v on the Ram

The E6600 is running at 3.0 now at 1.1v bios (1.2 windows) in a P5Q

Master Skooter · 26 Feb 2009 at 19:05

Thank you for replying

I'll see how far this baby will go

Denrok · 23 Mar 2009 at 20:48

sorry to drag up and old thread but i'm doing a build based on

Abit IP35 Pro
E6600 cooled by Arctic Freezer 7
2x2gb PC6400 OCZ Ram

And was wondering if you could give me any advice on OC it. I understand 3.2 is quite obtainable on air. Do you have some settings I could try to obtain this?

Cob · 23 Mar 2009 at 22:15

An E6600 and an IP35 Pro should be a pretty simple set-up to overcock.

3.2ghz should be obtainable on near default voltages. Just keep your memory around 800mhz.

Kennysevenfold · 23 Mar 2009 at 22:37

mine is at fsb -1375MHz, 367 x 9, 1.42V unlinked with ram at 900MHz

Denrok · 31 Mar 2009 at 22:23

thanks for the info can't wait to get my system built.