Freezer 7 Rev2 not happy with temps

setter · 1 Dec 2010 at 18:05

The tuniq would give a pretty decent drop, with the freezer my q6600 hit the low-mid 70's at 3.4ghz, 1.3750 vcore, swapped it for a TRUE black, 62-62-57-56 at load, upped the cpu to 3.6ghz on 1.400 vcore, load temps at 68-68-62-62. 3.8ghz though needed a hefty voltage increase, and lapping the cpu and cooler.

bainbridge · 1 Dec 2010 at 21:16

iBSOD said:
'Sometimes hits the 50's'

Thats fine. 60+ is something to be concerned about.

Eh? I thought that, although running rather hot, these chips were ok up to 70c.

setter · 1 Dec 2010 at 21:24

75c would have been a bit much for my liking on a q6600, only seen above that once on mine, (81c), that was prior to lapping it when i first tried 3.8ghz.

bainbridge · 1 Dec 2010 at 22:06

setter said:
75c would have been a bit much for my liking on a q6600

Yes I agree, the fact I was touching 70c @ 3.4Ghz made me get another cooler, low 60s is fine with me.

Savvy · 1 Dec 2010 at 22:25

I'm running freezer 7 rev 2 am getting temps 31-33 degrees idle on Phenom 955 and M4AGTD.

chipps101 · 1 Dec 2010 at 22:39

MeatLoaf said:
Cheers, is the Tuniq likley to give me much netter temps bearing in mind the cost of a new case?

my old q6600 with my tuniq used to be able to sit at 3.5 with 1.45v running through it and stayed in the low 60's under prime.

MeatLoaf · 3 Dec 2010 at 00:16

Well i bit the bullet and got a corsair H50-1. What a difference.

At stock idles at between 10 and 12 degreees accross the 4 cores

Back up to 3.6 and its around 28-32 accross the cores, going up to the high 60s under load.

Much better than the freezer