Gigabyte Z77M-D3H is OC useless ?

As i was saying, "MIT/Adv V Settings" only shows DRAM voltage control. One, single one, nothing else is there...
Logically it should be in this page, yes, but its just not there...

Went though whole bios, page by page, found nothing that resembles vcore control...
 
try switching from 3d mode to old style bios,and to undervolt the cpu set cpu voltage to normal in cpu voltage list and it unlocks dvid for adjustment then set to -0.0xxxxx amount you want to undervolt cpu by
 
I've cleared the bios once, even reflashed to newer version, that didnt help.

@Wazza3000: thats the thing - THERE IS NO SUCH THING, 3d or not...
The only thing related to cpu power is OVERVOLTAGE option, which can be AUTO, ENABLED or DISABLED. Thats it. And it doesnt change anything in regards of vcore/dvid...
 
Correct. Thats how it looks on mine... And i thought that M in this case stands for MicroATX... FML...

EDIT1 - Easytune also DRAM only voltage control...
 
What you should do is to always download the manual for the board before you buy it, as the above screen grabs were taken from them. It does give you an idea of what could be missing from the board, if that is important to you.
 
try usb2 or 3 slots one or the other,can use @BIOS if you get stuck to flash back

press alt and f12 at splash screen to flash main with back up bios
 
have you flashed back to your previous bios? sorry bout you losing your memory sticks,it was worth a try i guess
 
You must log in or register to reply here.
Back
Top Bottom