H50-1 on Antec 1200

reygjabla · 22 Jan 2010 at 10:06

Hi guys!

Can anyone advise on what's the best set-up for this Corsair H50-1 cooler on an Antec 1200 case?

Thamks.

macca672 · 22 Jan 2010 at 11:53

most of the ones I have seen use the cooler on the bottom of the two back fans pulling cold air in from the outside and pushing the warm air into the case so it can be exhausted thru the top fan

ebilcake · 22 Jan 2010 at 12:37

macca672 said:
most of the ones I have seen use the cooler on the bottom of the two back fans pulling cold air in from the outside and pushing the warm air into the case so it can be exhausted thru the top fan

I just have it setup push/pull, I don't really want to pull in more air from outside the case due to dust.

e36Adz · 22 Jan 2010 at 13:20

I only have the fans that have filters attached, blowing air into the case.

I have the H50 rad attached to the top-rear fan blowing air out, with another fan attached on the other side off the rad also blowing air out.

It keeps my idle temps just over the 30C mark, with all fans on lowest.

reygjabla · 22 Jan 2010 at 21:11

Thanks guys! What temps should I be looking at on a 4.0 GHtz OC for I7 920 DO?