Help me Overclock my P5W DH

MrMarkyMark

MrMarkyMark

MrMarkyMark

Associate
Joined
13 Aug 2006
Posts
5
I have a P5W DH bios 1101, 2 GB Geil 6400 800MHz Ultra Low Latency DDR2 , E6600 and Scythe Ninja. This is in an Asaka Eclipse 62 with a 500W Seasonic PSU and an ASUS EN7600GT Silent.

Can somone give me some precise OverClocking settings I can use in the BIOS. I know this is a popular combination of components so people must be able to recommend some settings.

Many thanks
Mark
 
Ai Overclocking Manual
CPU Freq 333
DRAM Freq: DDR2-833
Performance Mode: turbo
PCI Express Freq: 101
PCI Clock Synch Mode: 33.33
Memory Voltage: auto
CPU VCore Voltage: auto
FSB Term Voltage: auto
MCH Chipset Voltage: 1.5
ICH Chipset Voltage: 1.05
Configure DRAM Timing by SPD: 5-5-5-5-15
Hyper Path 3: Disabled

Try that.
 
Should be able to get the FSB quite a bit higher......I had a E6300 for a week or so and managed a 410FSB, although was happier with 400 (gives a 2.8GHz speed......)

Ultimately, though, each CPU/Mobo/RAM/setup-on-the-whole will give different results.......best just try things out......without changing any volts, you cannot go too far wrong..... ;)
 
Jimbo said:
Ai Overclocking Manual
CPU Freq 333
DRAM Freq: DDR2-833
Performance Mode: turbo
PCI Express Freq: 101
PCI Clock Synch Mode: 33.33
Memory Voltage: auto
CPU VCore Voltage: auto
FSB Term Voltage: auto
MCH Chipset Voltage: 1.5
ICH Chipset Voltage: 1.05
Configure DRAM Timing by SPD: 5-5-5-5-15
Hyper Path 3: Disabled

Try that.
Click to expand...

What will this clock to?
I left everything at default, put PCI Clock Sync to 'CPU' and CPU Freq to 333, it's hit 3ghz on default heatsink (waiting for the amanda). Currently at 40degree's whilst SuperPi 32m is on. I also put Auto on "DRAM-Freq".

My RAM is the 2gb GSkill 6400 HZ on a P5W DH. CPU is a 6600 'Conroe'.
 
You must log in or register to reply here.
Back
Top Bottom