Help please - PC won't boot since changing FCLK/RAM Freq.

[JW86]

Hi,

I today installed a new motherboard, CPU and RAM. All was working except for the 3600mhz RAM only running at 2133mhz.

I went into bios, enabled docp, set ram profile to 3600hz, and FCLK to 1800.

My computer now will not boot. It powers on, but my monitor receives no input from the pc and there is no option to get into bios.

I have attempted shorting the CLRTC pins, no difference. I've also tried reducing from 4 sticks to 1 stick RAM, no luck.

Advice please?

Hardware:
NEW - Asus x570-P motherboard
NEW - Ryzen 5 5600x CPU
NEW - Corsair Vengeance 4x8gb 3600mhz.
Corsair cx600 PSU
EVGA GeForce 1060 6gb

One thing to mention is that the PSU was able to fill the 24 and 8 pin power 'sockets' on the mobo, but not the 4 pin one. Manual states it can run with just the 8, and that was my experience also as computer was working fine before I went and tampered with things.

My primary concern right now is to resolve the boot issue / reset bios to default.

Please advise!
Cheers J

 

[JW86]

Update: resolved (was able to reset bios to defaults)

Just had to play around with ram slots and monitor configurations until was able to boot back into bios. No magic tips for anyone in future with this issue.