Lian-Li PC-011 rig photos?

Jay85 · 24 Aug 2020 at 12:58

uscool said:
Hi, this case seems great to work with and enough air flow wanted to ask about the Lian-Li PC-O11 Dynamic Midi-Tower and having the GPU vertically can that be done with 3 fans installed underneath ? I have been reading and seems possible with the Coolermaster Vertical GPU mount ? not the Lian Li mount ?

Thanks

It can be done with or without fans. I currently have 3 fans a slim radiator underneath and the verti mount from phanteks fits snug.

ryhoper1 · 30 Aug 2020 at 15:42

I went full disco unicorn with mine

uscool · 30 Aug 2020 at 17:26

@ryhoper1

Very nice build , I see you are using the COOLER MASTER MASTERFAN MF120 HALO, I was thinking of buying them when I upgrade CPU and Motherboard which will have 3pin rgb so can use one of them 3 RGB hubs to connect all the fans to 1 rgb header on board , just wondering can you turn off the middle leds and just have the outer halo on ?

Thanks

ryhoper1 · 30 Aug 2020 at 19:26

uscool said:
@ryhoper1

Very nice build , I see you are using the COOLER MASTER MASTERFAN MF120 HALO, I was thinking of buying them when I upgrade CPU and Motherboard which will have 3pin rgb so can use one of them 3 RGB hubs to connect all the fans to 1 rgb header on board , just wondering can you turn off the middle leds and just have the outer halo on ?

Thanks

I dont believe so, you can make them one solid colour though

uscool · 30 Aug 2020 at 23:35

ryhoper1 said:
I dont believe so, you can make them one solid colour though

on the coolermaster site it says Individually controlled Addressable RGB LED's maybe depends on motherboards rgb software I also saw this maybe only through its own controller
https://photos.app.goo.gl/Yi8JcsBUZ9hL7ahT8

ryhoper1 · 31 Aug 2020 at 03:00

uscool said:
on the coolermaster site it says Individually controlled Addressable RGB LED's maybe depends on motherboards rgb software I also saw this maybe only through its own controller
https://photos.app.goo.gl/Yi8JcsBUZ9hL7ahT8

Im not using the remote, my fans are daisy chained together and connected to the 3pin 5v connector on the mb, so i am using the gigabyte software which is pretty garbage to be honest. Other software might have more options.

uscool · 31 Aug 2020 at 10:20

ryhoper1 said:
Im not using the remote, my fans are daisy chained together and connected to the 3pin 5v connector on the mb, so i am using the gigabyte software which is pretty garbage to be honest. Other software might have more options.

ok thanks maybe that support via the coolermaster software myself just want to use motherboard for RGB control, planning on upgrading motherboard/cpu soon was planning on gigabyte price and features wonder what the RGB software is like on Asus

jgreen726 · 31 Aug 2020 at 23:18

Hi,

I just had my PC-011WXC turn up, what a beautiful case. I’m stunned, haven’t upgraded for a few years and well happy. Hadn’t seen this thread before purchase, lovely rigs.

A few of you have three fans next to the MB, I can’t see how they are fixed, perhaps my version doesn’t support that?

I have an AIO 360 to go on the top blowing out, thinking of putting exhaust fans above the PSU and PCI slots (back of case), is it really necessary to have intake fans if you have 7-9 exhaust fans?

As default I always go to Noctua fans but any tips would be welcome.

ryhoper1 · 1 Sep 2020 at 04:23

jgreen726 said:
Hi,

I just had my PC-011WXC turn up, what a beautiful case. I’m stunned, haven’t upgraded for a few years and well happy. Hadn’t seen this thread before purchase, lovely rigs.

A few of you have three fans next to the MB, I can’t see how they are fixed, perhaps my version doesn’t support that?

I have an AIO 360 to go on the top blowing out, thinking of putting exhaust fans above the PSU and PCI slots (back of case), is it really necessary to have intake fans if you have 7-9 exhaust fans?

As default I always go to Noctua fans but any tips would be welcome.

screws through the bottom of the case into the fans.

Thought I would mention the problem I ran into with mine incase anyone else has the same setup.

The fans in the bottom blocked me from connecting the USB3 front panel to the header on my gigabyte x570 master motherboard, So I ended up buying a 3.0 to 2.0 converter, the smaller size and extra length allowed me to connect it to the 2.0 leaving the bulky 3.0 cable at the back of the case.

Petrolhead · 4 Sep 2020 at 22:23

ryhoper1 said:
I went full disco unicorn with mine

i notice you side fans are blowing out. Interesting way to cool, does not mean negative pressure in the case?

ryhoper1 · 5 Sep 2020 at 03:07

cms239 said:
i notice you side fans are blowing out. Interesting way to cool, does not mean negative pressure in the case?

they are meant to be the other way round and i never even noticed until you pointed it out lol

Been running it for a week an temps have been fine.

Saul Farrell · 7 Sep 2020 at 15:06

Coojeekitten said:
Very nice. Where did you get the fans?

If you're looking for some great fans I recommend the Coolermaster MF120 Halos. They are ARGB and you get get a pack of 3 with a controller for £39.95 off overclockers.co.uk. They're great fans and quiet too. I have 9 of them in my O11D

Petrolhead · 7 Sep 2020 at 17:11

Saul Farrell said:
If you're looking for some great fans I recommend the Coolermaster MF120 Halos. They are ARGB and you get get a pack of 3 with a controller for £39.95 off overclockers.co.uk. They're great fans and quiet too. I have 9 of them in my O11D

I have 6 in mine plus the 3 fractal ones for the AIO

Spit · 7 Sep 2020 at 19:45

She's not quite finished yet, I am waiting for a 3080 next week so the small card is just a GT1030 so I can use Windows. I am totally in love with this case

ryhoper1 · 8 Sep 2020 at 01:45

Saul Farrell said:
If you're looking for some great fans I recommend the Coolermaster MF120 Halos. They are ARGB and you get get a pack of 3 with a controller for £39.95 off overclockers.co.uk. They're great fans and quiet too. I have 9 of them in my O11D

Its the halos I have in mine

Saul Farrell · 8 Sep 2020 at 08:51

ryhoper1 said:
Its the halos I have in mine

Yeah they look great. I currently have 6 of the Halos and 3 NZXT Aer Ps from my X73. Just waiting a bit before upgrading

Petrolhead · 4 Oct 2020 at 18:44

rebel rebel said:
Leak test going well!!!

Could the distro plate at the front?

rebel rebel · 4 Oct 2020 at 19:23

cms239 said:
Could the distro plate at the front?

I believe its just for the side. There are ones designed to fit in the front though.

southy1978 · 7 Oct 2020 at 01:03

I recently changed cases from an old Corsair air 540 to the o11d pcmr version, I needed room for the rtx 3090 but I’ve still not managed to snag one yet. I previously had sli’d 1080’s but got the rtx2060 off Facebook marketplace to tide me over as a bargain. I also added some Corsair ql120 fans.

Petrolhead · 7 Oct 2020 at 03:01

southy1978 said:
I recently changed cases from an old Corsair air 540 to the o11d pcmr version, I needed room for the rtx 3090 but I’ve still not managed to snag one yet. I previously had sli’d 1080’s but got the rtx2060 off Facebook marketplace to tide me over as a bargain. I also added some Corsair ql120 fans.

what AIO is that