i brought a 3900X and Msi X570 Meg ace from overclockers on release day and got them on Tuesday making this thread as I’ve noticed quite a few problems and looking for some advice
My pc is X570 ace with 3900X 16gb Corsair cl 16 ram gigabyte 2080 gaming with acool plexus block with hx750i psu in phanteks elvov x case with Corsair hydro x cpu block and pump Rez combo with 240mm acool and 360mm radiator,
I’m on the v13 bios. Now msi have put all there software into the dragon center and when I install that it over writes everything the inbuilt monitoring and overclocking software In dragon center sets my cpu to only base clock of 3.8ghz in balance mode setting and locks it to it no boosting or anything and sets Vcore to 1.175v and doesn’t allow for any changes even in the bios the software overwrites it’s and at silent it’s clocked at 2.77ghz with same Vcore etc then the extream profile tries to run 4.2ghz all core at 1.175v and well my pc crashes not surprisingly hehe so I uninstalled the program .
Without dragon center on my pc acts just as strangely at idle I getting Vcore boosting to 1.5v and temps are bouncing between 48 and 64 degrees well spiking to 64 degrees but under prime 95 test for 4 hours at avarage of 4.1ghz my temps avarage 64 to 70 degrees max being 71 degrees.
I don’t know what causing any of these problems dragon softway seems rushed missing a lot of tools and is not acting as it sould do but without it my cpu is still acting weird anyone else got these problems or same motherboard as me any ideas how I can make it work as intended ?
My pc is X570 ace with 3900X 16gb Corsair cl 16 ram gigabyte 2080 gaming with acool plexus block with hx750i psu in phanteks elvov x case with Corsair hydro x cpu block and pump Rez combo with 240mm acool and 360mm radiator,
I’m on the v13 bios. Now msi have put all there software into the dragon center and when I install that it over writes everything the inbuilt monitoring and overclocking software In dragon center sets my cpu to only base clock of 3.8ghz in balance mode setting and locks it to it no boosting or anything and sets Vcore to 1.175v and doesn’t allow for any changes even in the bios the software overwrites it’s and at silent it’s clocked at 2.77ghz with same Vcore etc then the extream profile tries to run 4.2ghz all core at 1.175v and well my pc crashes not surprisingly hehe so I uninstalled the program .
Without dragon center on my pc acts just as strangely at idle I getting Vcore boosting to 1.5v and temps are bouncing between 48 and 64 degrees well spiking to 64 degrees but under prime 95 test for 4 hours at avarage of 4.1ghz my temps avarage 64 to 70 degrees max being 71 degrees.
I don’t know what causing any of these problems dragon softway seems rushed missing a lot of tools and is not acting as it sould do but without it my cpu is still acting weird anyone else got these problems or same motherboard as me any ideas how I can make it work as intended ?