My Bitfenix Prodigy Watercooling parts (Help)

Cleeecooo · 6 Sep 2012 at 09:56

Allnamestaken said:
Perfect I was not sure on the fans so went with the gentle typhoons.

I want to get the thickest rad in there as I can.

Im thinking that I should get a fan controller too what you think? not sure if neccesary.

it's a good idea, the GTs at full power are fairly noisy

Allnamestaken · 6 Sep 2012 at 10:10

Hmmm 486 xD

Crazy how much these setups cost :O and thats not even a top end loop with a D5 OR a gpu block lmfao

Allnamestaken · 6 Sep 2012 at 10:15

£480 minus shipping. a rotary for the res one for the cpu block normal fittings for the rest.

So the pump fits inside the top? I watched a youtube on how to fit it. THen I can fit the tube res Onto the top? something like that.

YOUR BASKET
1 x OCZ Agility 3 240GB 2.5" SATA 6Gb/s Solid State Hard Drive (AGT3-25SAT3-240G) £128.99
1 x Alphacool Laing D5 Vario Pump 655 - NO TOP £56.99
1 x EK-Supremacy - CPU Waterblock - Nickel Acetal £56.99
1 x Corsair HX/TXM Series individually Sleeved Modular Cable Kit - Black £46.99
1 x XSPC EX240 Multiport Radiator £43.99
1 x EK Multioption Reservoir X2 150 Basic £28.98
1 x Alphacool HF D5 TOP - Clear Plexi G1/4 £21.98
1 x Mayhems Pastel - Light Red Coolant 1L £14.99
2 x Scythe Gentle Typhoon 120mm 1450 RPM - 3 Pin £13.99 (£27.98)
1 x Gelid Solutions GC-Extreme Cutting Edge Thermal Compound (3.5g) £8.4
2 x XSPC HighFlex Hose 7/16" ID, 5/8" OD, 15.9/11.1mm, 2m, Clear/UV £5.99 (£11.98)
1 x EK-PSC Adapter Rotary 45° G1/4 Nickel £3.59
7 x EK PSC Compression Fitting 7/16 [16/11mm] - G1/4 - Nickel £3.29 (£23.03)
1 x Alphacool 120mm x 100mm Velcro Pad £1.99
1 x OcUK Value PSU Bridging Connector (24 Pin) £1.3
2 x OcUK G1/4 - Screw in Seal Cap - Knurled - Shiny Silver £0.98 (£1.96)
Total : £492.12 (includes shipping : £10.00).

Monkeyspaz5000 · 6 Sep 2012 at 10:42

I would say defo to a fan controller.

You can fit a recon in the drive bay with some faffing

Allnamestaken · 6 Sep 2012 at 10:45

Will have to cut out the bottom
Part of the bay won't I? Shouldn't be a prob.

Monkeyspaz5000 · 6 Sep 2012 at 10:47

Allnamestaken said:
Will have to cut out the bottom
Part of the bay won't I? Shouldn't be a prob.

Yeah and move the rad back about 10mm max.

Cleeecooo · 6 Sep 2012 at 17:19

As your case can accomodate a thick rad, go for an RX as it's better

Monkeyspaz5000 · 31 Oct 2012 at 08:01

Jaheermk said:
Very bina laowe im ito kumain ng puki mula sa titi pagkain ngunit ang luya ng cut retaftd jheeufh fuhainot.

English ?