New Parvum Systems Cases & we are give a special limited edition white/gold Parvum Systems case away

[Ace Modder]

Hi

Parvum Systems Facebook Page

Parvum and OcUK have worked hard together again to bring you more options within the Parvum System Case range. We now offer the cases with red finish - I think these would be great with a black and red motherboard.
Stock is due to us on Monday.

As an added bonus I have a free one to give away to one lucky forum member. White with gold trim!


To be in with a chance of winning this amazing case, all you have to do is is reply to this thread with a picture of yourself (or a partner) with a poster/banner saying why Parvum Systems and OcUK are amazing. The most inventive photo will be choosen by me, and you will receive the case for free.

Entries valid until Wednesday 10th April 2013 at noon. I will pick a winner that afternoon!

Good luck all!

Parvum Systems S1.0 MicroATX Case - Black with Red @ £129.95 inc VAT

Made completely from white and black 5mm high quality acrylic the case is super sleek and beautifully engineered. Each case is individually cut and hand assembled.

- Hand bent acrylic mid-wall. Provides both case strength and the best cable management on the market. PSU/HDDs and cables all hidden.
- 2 x 120mm fans in the front AND top of the case. Enough room for two 240mm water-cooling radiators.

Specifications:
- Materials: Acrylic
- Colours: Black & Red
- Dimensions (WxHxD): 275 x 305 x 420mm
- Maximum CPU Cooler Height: 152mm
- Motherboard Sizes: mATX
-3.5" Drive Bays: 2
- 2.5" Drive Bays: 4
- Cooling Front: 2 x 120mm
-Cooling Rear: 3 x 80mm
- Cooling Top: 2 x 120mm
- PCI Slots: x 4

Each case includes:
- All required screws.
- Motherboard Standoffs.
- 1 x White LED Ring Vandal switch.
- 2 x 240mm Acrylic Grill
- 1 x 80mm Acrylic Grill

Only £129.95 inc VAT.

ORDER NOW





Parvum Systems S1.0 MicroATX Case - White with Red @ £129.95 inc VAT

Made completely from white and red 5mm high quality acrylic the case is super sleek and beautifully engineered. Each case is individually cut and hand assembled.

- Hand bent acrylic mid-wall. Provides both case strength and the best cable management on the market. PSU/HDDs and cables all hidden.
- 2 x 120mm fans in the front AND top of the case. Enough room for two 240mm water-cooling radiators.

Specifications:
- Materials: Acrylic
- Colours: White with Red
- Dimensions (WxHxD): 275 x 305 x 420mm
- Maximum CPU Cooler Height: 152mm
- Motherboard Sizes: mATX
-3.5" Drive Bays: 2
- 2.5" Drive Bays: 4
- Cooling Front: 2 x 120mm
-Cooling Rear: 3 x 80mm
- Cooling Top: 2 x 120mm
- PCI Slots: x 4

Each case includes:
- All required screws.
- Motherboard Standoffs.
- 1 x White LED Ring Vandal switch.
- 2 x 240mm Acrylic Grill
- 1 x 80mm Acrylic Grill

Only £129.95 inc VAT.

ORDER NOW


Remember - OcUK are exclusive with the Parvum Systems range!

 

[MonsterMoshi]

Needs more pictures of the inside of the case
HDD placements, cable management etc.

 

[Hyburnate]

Needs more pictures of the inside of the case
HDD placements, cable management etc.

I agree, needs more pictures than just the sides of the case.

 

[Ace Modder]

Once the stock lands, I will get loads taken for you all.

 

[rjk]

do want, they had a black and gold one with them at insomnia and it looked immense, i mentioned about white and gold to them and this happens.

Parvum, Y U TEMPT ME!

 

[Ace Modder]

There are a couple of pics of the interior here.

 

[parvumsystems]

You can also see some more photos of our cases on the site here:
http://www.parvumsystems.com/gallery

Thanks Lee & good luck everyone!

 

[Pelinox]

The white/red one.. Do want :O

Shame I have an E-ATX mobo atm., else I would try this.

About the contest, have to live in UK to enter?

 

[Hyburnate]

You can also see some more photos of our cases on the site here:
http://www.parvumsystems.com/gallery

Thanks Lee & good luck everyone!

Yeah some nice pics there, would be nice of OcUK to show them on their own site.

Just a quick point, you'd be best not using Flikr for your own images, it allows you more flexibility and not being dependent on another site, no matter how big or small it is.

 

[Tackle_Berry]

Is it possible to mount the following in one of these?

2x 240 rads (with fans total 70mm thick)
1x Small res/pump combo
2x GPU's in SLI
2x SSD
1x HDD

 

[Ace Modder]

Yeah some nice pics there, would be nice of OcUK to show them on their own site.

The white case with black trim (the last images on Parvums website link) they were images OcUK took, and I gave them to Parvum. These images are on the white case product image on our website lol.

Many of the other images on Parvums site are of custom option cases that Parvum have made for custom orders. I will provide you will more images of the red cases once the stock has arrived.

 

[Ace Modder]

Is it possible to mount the following in one of these?

2x 240 rads (with fans total 70mm thick)
1x Small res/pump combo
2x GPU's in SLI
2x SSD
1x HDD

This case will fit it all.

 

[melvis]

aww and i thought id decided on an sg-08 for my future haswell build, now ive got to decide all over again, these new parvum colors look quite sexy

 

[Ace Modder]

Not the best photo but here is a couple of images with the rear panel removed.

You can see the HDD mounting point at top

 

[AMG]

So I guess you have to wire up any extras you fancy?

Hmm like that idea, perfer not to cut things due to lack of tools/workplace

 

[Alasdairhurst]

I have my idea planned and the "set" created just now to design the banner! Hopefully this will qualify

 

[Ace Modder]

You get the cables for the anti-vandal switch in the box too, for the power.

 

[Alasdairhurst]

Here we go! I've got loads of monitors so may as well make use of them "creatively"

 

[T345]

My entry will be coming soon

 

[Raikiri]

Long exposure + phone and a slightly wobbly hand