OPTI 144 DFI + MUSHKIN REDLINE

[prjkitch]

hi peeps this is what i have just ordered will i be able to get a good overclock on this setup as i have never o/c an athalon/opteron 64 before

DFI LANPARTY nF4 SLI-DR SKT939
hyper type R 580W PSU
Mushkin redline xp4000 mem 512 x 2
Antec Super Lanboy ATX Case With 2x120mm Fans
AMD Opteron UP 144 1.8GHz 64bit 1Mb
200Gb SATA300 Maxtor Diamondmax Plus 10
Asetek 06-L-0015 VapoChill Micro Xt extreem
LG GSA-4167SBB Silver 16x16
Sapphire X800GTO² 256mb GDDR3 PCI-E

even if i get a CABGE what can i expect for a reasonable O/C i Would be happy with 2.4-2.6 anything above this would be a bonus and where do i start i have had a peek at the dfi bios and it scared me i take its not just bumping up the fsb!! otherwise i have worked out to get a 3Ghz o/c i would need an fsb of 666/667 and even the muskin wont go much past 530/550 any hints would be appreciated

 

[prjkitch]

right i should have all my parts tommrow!!! can someone please give me some idea of how to set up the bios for the overclock as i have read several threads and all this talk of memory deviders ht multis etc is confusing me a tad i take it i should load windows and down load new drivers and bios before i start!! i also take it i need a specific bios for the winbond memory on my mushkin redline?? (bring back the ol up the fsb method )

any help is greatfully recived!!!

and yes ordered an 80mm fan for the memory and the fets (would putting extra ramsinks help cooling?? like the ones for graphic card memory the little sticky ones??)