Caporegime
yes it will feel tight.
Pay day tomorrow, time to buy!
- Thread starter Anderson256
- Start date
Okay I was expecting some click or locking noise but its just held do with pure pressure from the lever? Thats that bit done thanks stulid. Now onto fitting the I/O shield and Mobo to case.
Caporegime
pure pressure, and the retaining clip which the lever goes under.
Are you supposed to fit rubber washers when screwing in stand off screws?
Caporegime
no.
look closely at the holes in the motherboard and you will see little metal crimps around the edges.
look closely at the holes in the motherboard and you will see little metal crimps around the edges.
I didnt think so, wondered what they are for though. Thanks again.
Soldato
the 600t is a lovely case. Enjoyed building my first attempt in that case 
The fan controller can be a bit fiddly if you don't read the manual first. You've been warned.
The fan controller can be a bit fiddly if you don't read the manual first. You've been warned.
Yeah im on the front panel and fans etc. Overwhelming atm lol but I should manage
Errmmm problem... I didnt get a "manual" with the 600t. I only got a Quick Start Guide and a accessory bag, but no manual. This is gonna be difficult.
Caporegime
There is a build guide here - http://www.corsair.com/systembuild/Graphite_600T_Yellowbeard
and something to download here - http://www.corsair.com/applicationnote/600t-features-guide
and something to download here - http://www.corsair.com/applicationnote/600t-features-guide
Thanks again stulid ill give them a go.
Soldato
just remember to connect the case fan leads to the PSU connectors...took me a few mins to work out why the case fans weren't spinning...doh 
What do you mean PSU Connectors? Im not on the case fans yet Have other stuff to do along with building this PC so its gonna take all night.
Btw I can only find one USB header on my Mobo is this right? Or am I overlooking another one somewhere?
Have other stuff to do along with building this PC so its gonna take all night. Btw I can only find one USB header on my Mobo is this right? Or am I overlooking another one somewhere?
Ahhhh I see the Fan connectors have female covers on them. So am I right in assuming you take off two of the covers and plug them into the fans. And then plug the two remaining fans into the mobo then connect molex to power?
Caporegime
Female? do you mean 4pin female molex? just stick them in a psu molex connector.
you could even stack them up on to one psu connector if the fans have both male and female connectors.
you could even stack them up on to one psu connector if the fans have both male and female connectors.
Last edited:
Caporegime
Photobucket for the win!!!!!!
Its really difficult for me to explain but ill try again
I have 4 x 3pin cables each of which have some sort of dummie cover on them making them female connectors. And I have 2 x 3pin Female connectors. And finally a 4pin molex with a male and female on either side of it.
So what I was thinking was that I should remove 2 of the female covers and plug the males into the 2 females. Leaving me with 2 females to plug into the mobo fan connections.
Then do I connect the molex cable to my PSU giving my fan controller and all connected fans power? Sorry not very good at explaining this
I have 4 x 3pin cables each of which have some sort of dummie cover on them making them female connectors. And I have 2 x 3pin Female connectors. And finally a 4pin molex with a male and female on either side of it.
So what I was thinking was that I should remove 2 of the female covers and plug the males into the 2 females. Leaving me with 2 females to plug into the mobo fan connections.
Then do I connect the molex cable to my PSU giving my fan controller and all connected fans power? Sorry not very good at explaining this