Pearleasnt Liquid cooling mix
- Thread starter Mayhems
- Start date
this morning i received the full RASA kit from XSPC.
thank you Paul over at XSPC for sending us the kit to add to out tests.
Once it was fitted in to a older chassis we started running test and found that the viscosity of the liquid was to much how ever like all mad men we have a back up plan and changed the ratio of the liquid a little.
With the new adjusted liquid every thing run fine and we even got a 4c drop in temps.
Some quick pics of the liquid in action with the RASA kit from XSPC
Rasa 750 RS240 WaterCooling Kit
Video will come later
thank you Paul over at XSPC for sending us the kit to add to out tests.
Once it was fitted in to a older chassis we started running test and found that the viscosity of the liquid was to much how ever like all mad men we have a back up plan and changed the ratio of the liquid a little.
With the new adjusted liquid every thing run fine and we even got a 4c drop in temps.
Some quick pics of the liquid in action with the RASA kit from XSPC
Rasa 750 RS240 WaterCooling Kit
Video will come later
Its 3c above water confirmed from independents yesterday.
how ever tests are still on going.
-=-=-=-=-=-
Testing Results :
Cooling bocks that have impingement ports are not recommend for use with this Product. If the block has a plate and it is removable then we advise that the plate be removed before proceeding to use this liquid.
Water Cooling Blocks and parts
XSPC
RASA water block - PASS
RS240 - PASS
X20 750 Pump & Reservoir combo - FAIL ***
Single Slot Pump & Reservoir combo - FAIL ***
Laing DDC 200ml Reservoir Pump Top : Plexi - PASS
Single 5.25″ Bay Reservoir - PASS -=Out standing effect's=-
Duel 5.25″ Bay Reservoir - PASS -=Out standing effect's=-
Standing for 1 week - Working
Constant flow low rate - Working
Constant flow fast rate - Working
Long term testing - On going
Temperature + 2.5 to 3c (stress testing under Prime 95) after 7 days of running.
(no build up in block found)
*** Bay reservoirs with pump cause build up between the pump and the reservoir were the liquid is standing and there is no flow.
Watercool
Heat Killer
With Restriction Plate - FAIL
Standing for 1 week - Fail
Constant flow low rate - Working
Constant flow fast rate - Fail
Temperature + 8 to 10c
Long term Testing - Fail
(Build up in block found)
With out Restriction Plate - PASS
Standing for 1 week - Working
Constant flow low rate - Working
Constant flow fast rate - Working
Temperature + 2.8 to 4c
Long term testing - On going
(No Build up in block found)
EK
Supreme LT AMD Acetal AMR3 - PASS
Standing for 1 week - Working
Constant flow low rate - Working
Constant flow fast rate - Working
Temperature + 3.1 to 4.3c
Long term testing - on going
(No Build up in block found)
Supreme HF - Under test (new plating) extra checking to see if fluids ruin the coating
FC460 GTX (old plating) extra checking to see if fluids ruin the coating
Phobya
DC12-400 12 Volt Pump - PASS
DC12-800 12 Volt Pump - PASS very hight flow rate - looks like liquid is on acid .....
Balancer 150 Black Nickel - PASS -=Out standing effect's=-
S.1366 / 1156 Water Block - PASS
G-Changer 240 - PASS
Swiftech
Apogee XTL (will not be testing)
Apogee XT Extreme (will not be testing)
Koolance To be tested (on site not tested yet)
Koolance CPU-370
Laing
DDC 10 watt (working)
DDC 12 Watt (working)
D5 (not tested)
how ever tests are still on going.
-=-=-=-=-=-
Testing Results :
Cooling bocks that have impingement ports are not recommend for use with this Product. If the block has a plate and it is removable then we advise that the plate be removed before proceeding to use this liquid.
Water Cooling Blocks and parts
XSPC
RASA water block - PASS
RS240 - PASS
X20 750 Pump & Reservoir combo - FAIL ***
Single Slot Pump & Reservoir combo - FAIL ***
Laing DDC 200ml Reservoir Pump Top : Plexi - PASS
Single 5.25″ Bay Reservoir - PASS -=Out standing effect's=-
Duel 5.25″ Bay Reservoir - PASS -=Out standing effect's=-
Standing for 1 week - Working
Constant flow low rate - Working
Constant flow fast rate - Working
Long term testing - On going
Temperature + 2.5 to 3c (stress testing under Prime 95) after 7 days of running.
(no build up in block found)
*** Bay reservoirs with pump cause build up between the pump and the reservoir were the liquid is standing and there is no flow.
Watercool
Heat Killer
With Restriction Plate - FAIL
Standing for 1 week - Fail
Constant flow low rate - Working
Constant flow fast rate - Fail
Temperature + 8 to 10c
Long term Testing - Fail
(Build up in block found)
With out Restriction Plate - PASS
Standing for 1 week - Working
Constant flow low rate - Working
Constant flow fast rate - Working
Temperature + 2.8 to 4c
Long term testing - On going
(No Build up in block found)
EK
Supreme LT AMD Acetal AMR3 - PASS
Standing for 1 week - Working
Constant flow low rate - Working
Constant flow fast rate - Working
Temperature + 3.1 to 4.3c
Long term testing - on going
(No Build up in block found)
Supreme HF - Under test (new plating) extra checking to see if fluids ruin the coating
FC460 GTX (old plating) extra checking to see if fluids ruin the coating
Phobya
DC12-400 12 Volt Pump - PASS
DC12-800 12 Volt Pump - PASS very hight flow rate - looks like liquid is on acid .....
Balancer 150 Black Nickel - PASS -=Out standing effect's=-
S.1366 / 1156 Water Block - PASS
G-Changer 240 - PASS
Swiftech
Apogee XTL (will not be testing)
Apogee XT Extreme (will not be testing)
Koolance To be tested (on site not tested yet)
Koolance CPU-370
Laing
DDC 10 watt (working)
DDC 12 Watt (working)
D5 (not tested)
Last edited:
size atm is between 20nm - 140nm
Were working on a second fluid for impingement blocks that will be between
20nm - 60nm
just to add if you off to the i43 you hopefully should see the liquid on display in some ones pc. If they get there case on time.
I will all so be there Friday (only) from about 10:00 till 15:45
Just look for some one with dye all over there hands
I will all so be there Friday (only) from about 10:00 till 15:45
Just look for some one with dye all over there hands
BEING UPDATED
Test Results
Aurora
RRP £15.00
ETA **/**/20011
Not to be used with impingement water cooling blocks. Only to be used with fast flow blocks. This is a wide effect liquid using much larger particles than Aurora +.
EK WB
Supreme LT AMD Acetal AMR3 - PASS
Supreme HF (restriction plate removed) - PASS
Supreme HF (restriction plate installed) - FAIL
XSPC
RASA water block - PASS
RS240 - PASS
X20 750 Pump & Reservoir combo - FAIL
Single Slot Pump & Reservoir combo - FAIL
Laing DDC 200ml Reservoir Pump Top : Plexi - PASS
Single 5.25″ Bay Reservoir - PASS -=Out standing effect's=-
Duel 5.25″ Bay Reservoir - PASS -=Out standing effect's=-
Watercooling
Heat Killer (With Restriction Plate) - FAIL
Heat Killer (Without Restriction Plate) - PASS
Phobya
DC12-400 12 Volt Pump - PASS
DC12-800 12 Volt Pump - PASS very hight flow rate - looks like liquid is on acid .....
Balancer 150 Black Nickel - PASS -=Out standing effect's=-
S.1366 / 1156 Water Block - PASS
G-Changer 240 - PASS
Swiftech
Apogee XTL (will not be testing)
Apogee XT Extreme (will not be testing)
Koolance
Koolance CPU-370 (with small restriction plate) FAIL
Koolance CPU-370 (restriction plate removed.) PASS
Laing
DDC 10 watt (working) ( better using the 18watt though)
DDC 18 Watt (working)
D5 (not tested)
Aurora +
RRP £17.00
ETA **/**/2011
Aurora + Has a much smaller particle size. Works really well with 1/2" tubing showing excellent effects..
EK WB
Supreme LT AMD Acetal AMR3
Supreme HF (restriction plate removed)
Supreme HF (restriction plate installed) : PASS
XSPC
RASA water block
RS240
X20 750 Pump & Reservoir combo FAIL
Single Slot Pump & Reservoir combo FAIL
Laing DDC 200ml Reservoir Pump Top : PASS
Single 5.25″ Bay Reservoir PASS
Duel 5.25″ Bay Reservoir PASS
Watercooling
Heat Killer (With Restriction Plate)
Heat Killer (Without Restriction Plate)PASS
Phobya
DC12-400 12 Volt Pump PASS
DC12-800 12 Volt Pump PASS
Balancer 150 Black Nickel PASS
S.1366 / 1156 Water Block PASS
G-Changer 240
Swiftech
Apogee XTL (will not be testing)
Apogee XT Extreme (will not be testing)
Koolance
Koolance CPU-370 (with out restriction plate)
Koolance CPU-370 (with restriction plate) PASS
Laing
DDC 10 watt PASS
DDC 18 Watt PASS
D5
Update 2
Aurora base colours
Usage : For none Impingement water cooling blocks, Do not use with inbuilt low pressure pumps that are inside reservoirs.
Clear / Blue
Clear / Red
Clear / Silver
Clear / Gold
Aurora + base colours
Usage : For Impingement water cooling blocks, Do not use with inbuilt low pressure pumps that are inside reservoirs.
Clear / Blue
Clear / Red
Clear / Silver
Clear / Gold
Below Blue / Silver
Above Gold / Red
Test Results
Aurora
RRP £15.00
ETA **/**/20011
Not to be used with impingement water cooling blocks. Only to be used with fast flow blocks. This is a wide effect liquid using much larger particles than Aurora +.
EK WB
Supreme LT AMD Acetal AMR3 - PASS
Supreme HF (restriction plate removed) - PASS
Supreme HF (restriction plate installed) - FAIL
XSPC
RASA water block - PASS
RS240 - PASS
X20 750 Pump & Reservoir combo - FAIL
Single Slot Pump & Reservoir combo - FAIL
Laing DDC 200ml Reservoir Pump Top : Plexi - PASS
Single 5.25″ Bay Reservoir - PASS -=Out standing effect's=-
Duel 5.25″ Bay Reservoir - PASS -=Out standing effect's=-
Watercooling
Heat Killer (With Restriction Plate) - FAIL
Heat Killer (Without Restriction Plate) - PASS
Phobya
DC12-400 12 Volt Pump - PASS
DC12-800 12 Volt Pump - PASS very hight flow rate - looks like liquid is on acid .....
Balancer 150 Black Nickel - PASS -=Out standing effect's=-
S.1366 / 1156 Water Block - PASS
G-Changer 240 - PASS
Swiftech
Apogee XTL (will not be testing)
Apogee XT Extreme (will not be testing)
Koolance
Koolance CPU-370 (with small restriction plate) FAIL
Koolance CPU-370 (restriction plate removed.) PASS
Laing
DDC 10 watt (working) ( better using the 18watt though)
DDC 18 Watt (working)
D5 (not tested)
Aurora +
RRP £17.00
ETA **/**/2011
Aurora + Has a much smaller particle size. Works really well with 1/2" tubing showing excellent effects..
EK WB
Supreme LT AMD Acetal AMR3
Supreme HF (restriction plate removed)
Supreme HF (restriction plate installed) : PASS
XSPC
RASA water block
RS240
X20 750 Pump & Reservoir combo FAIL
Single Slot Pump & Reservoir combo FAIL
Laing DDC 200ml Reservoir Pump Top : PASS
Single 5.25″ Bay Reservoir PASS
Duel 5.25″ Bay Reservoir PASS
Watercooling
Heat Killer (With Restriction Plate)
Heat Killer (Without Restriction Plate)PASS
Phobya
DC12-400 12 Volt Pump PASS
DC12-800 12 Volt Pump PASS
Balancer 150 Black Nickel PASS
S.1366 / 1156 Water Block PASS
G-Changer 240
Swiftech
Apogee XTL (will not be testing)
Apogee XT Extreme (will not be testing)
Koolance
Koolance CPU-370 (with out restriction plate)
Koolance CPU-370 (with restriction plate) PASS
Laing
DDC 10 watt PASS
DDC 18 Watt PASS
D5
Update 2
Aurora base colours
Usage : For none Impingement water cooling blocks, Do not use with inbuilt low pressure pumps that are inside reservoirs.
Clear / Blue
Clear / Red
Clear / Silver
Clear / Gold
Aurora + base colours
Usage : For Impingement water cooling blocks, Do not use with inbuilt low pressure pumps that are inside reservoirs.
Clear / Blue
Clear / Red
Clear / Silver
Clear / Gold
Below Blue / Silver
Above Gold / Red
On another note we have been asked via a second party for Intel if our pearl will work on 3M products. So tonight i set about testing it and found it does.
Longer term testing is needed how ever on the NOVAC 649 it has less mass than water and less viscosity than water .. well ill let the picture do the talking ...
Longer term testing is needed how ever on the NOVAC 649 it has less mass than water and less viscosity than water .. well ill let the picture do the talking ...
Test Results
Aurora
RRP £15.00
ETA **/11/20011
Not to be used with impingement water cooling blocks. Only to be used with fast flow blocks. This is a wide effect liquid using much larger particles than Aurora +.
EK WB
Supreme LT AMD Acetal AMR3 - PASS
Supreme HF (restriction plate removed) - PASS
Supreme HF (restriction plate installed) - FAIL
XSPC
RASA water block - PASS
RS240 - PASS
X20 750 Pump & Reservoir combo - FAIL
Single Slot Pump & Reservoir combo - FAIL
Laing DDC 200ml Reservoir Pump Top : Plexi - PASS
Single 5.25″ Bay Reservoir - PASS -=Out standing effect's=-
Duel 5.25″ Bay Reservoir - PASS -=Out standing effect's=-
Watercooling
Heat Killer (With Restriction Plate) - FAIL
Heat Killer (Without Restriction Plate) - PASS
Phobya
DC12-400 12 Volt Pump - PASS
DC12-800 12 Volt Pump - PASS very hight flow rate - looks like liquid is on acid .....
Balancer 150 Black Nickel - PASS -=Out standing effect's=-
S.1366 / 1156 Water Block - PASS
G-Changer 240 - PASS
Swiftech
Apogee XTL (will not be testing)
Apogee XT Extreme (will not be testing)
Koolance
Koolance CPU-370 (with small restriction plate) FAIL
Koolance CPU-370 (restriction plate removed.) PASS
Laing
DDC 10 watt (working) ( better using the 18watt though)
DDC 18 Watt PASS
D5 PASS
Aurora +
RRP £17.00
ETA **/11/2011
Aurora + Has a much smaller particle size. Works really well with 1/2" tubing showing excellent effects..
EK WB
Supreme LT AMD Acetal AMR3 PASS
Supreme HF (restriction plate removed) PASS
Supreme HF (restriction plate installed) : PASS
XSPC
RASA water block PASS
RS240 PASS
X20 750 Pump & Reservoir combo FAIL
Single Slot Pump & Reservoir combo FAIL
Laing DDC 200ml Reservoir Pump Top : PASS
Single 5.25″ Bay Reservoir PASS
Duel 5.25″ Bay Reservoir PASS
Watercooling
Heat Killer (With Restriction Plate) PASS
Heat Killer (Without Restriction Plate) PASS
Phobya
DC12-400 12 Volt Pump PASS
DC12-800 12 Volt Pump PASS
Balancer 150 Black Nickel PASS
S.1366 / 1156 Water Block PASS
G-Changer 240 PASS
Swiftech
Apogee XTL (will not be testing)
Apogee XT Extreme (will not be testing)
Koolance
Koolance CPU-370 (with out restriction plate) PASS
Koolance CPU-370 (with restriction plate) PASS
Laing
DDC 10 watt PASS
DDC 18 Watt PASS
D5 PASS
Confirmation from testers :
+ 2 to 3c above water (tester 1 & 2) PASS
Non blocking when using correct mix with correct block (tester 1 & 2) PASS
None conductive for 1 month --- only ive tested this out.
Testing complete
Next stage is refinement.
ETA
Announced
Aurora
RRP £15.00
ETA **/11/20011
Not to be used with impingement water cooling blocks. Only to be used with fast flow blocks. This is a wide effect liquid using much larger particles than Aurora +.
EK WB
Supreme LT AMD Acetal AMR3 - PASS
Supreme HF (restriction plate removed) - PASS
Supreme HF (restriction plate installed) - FAIL
XSPC
RASA water block - PASS
RS240 - PASS
X20 750 Pump & Reservoir combo - FAIL
Single Slot Pump & Reservoir combo - FAIL
Laing DDC 200ml Reservoir Pump Top : Plexi - PASS
Single 5.25″ Bay Reservoir - PASS -=Out standing effect's=-
Duel 5.25″ Bay Reservoir - PASS -=Out standing effect's=-
Watercooling
Heat Killer (With Restriction Plate) - FAIL
Heat Killer (Without Restriction Plate) - PASS
Phobya
DC12-400 12 Volt Pump - PASS
DC12-800 12 Volt Pump - PASS very hight flow rate - looks like liquid is on acid .....
Balancer 150 Black Nickel - PASS -=Out standing effect's=-
S.1366 / 1156 Water Block - PASS
G-Changer 240 - PASS
Swiftech
Apogee XTL (will not be testing)
Apogee XT Extreme (will not be testing)
Koolance
Koolance CPU-370 (with small restriction plate) FAIL
Koolance CPU-370 (restriction plate removed.) PASS
Laing
DDC 10 watt (working) ( better using the 18watt though)
DDC 18 Watt PASS
D5 PASS
Aurora +
RRP £17.00
ETA **/11/2011
Aurora + Has a much smaller particle size. Works really well with 1/2" tubing showing excellent effects..
EK WB
Supreme LT AMD Acetal AMR3 PASS
Supreme HF (restriction plate removed) PASS
Supreme HF (restriction plate installed) : PASS
XSPC
RASA water block PASS
RS240 PASS
X20 750 Pump & Reservoir combo FAIL
Single Slot Pump & Reservoir combo FAIL
Laing DDC 200ml Reservoir Pump Top : PASS
Single 5.25″ Bay Reservoir PASS
Duel 5.25″ Bay Reservoir PASS
Watercooling
Heat Killer (With Restriction Plate) PASS
Heat Killer (Without Restriction Plate) PASS
Phobya
DC12-400 12 Volt Pump PASS
DC12-800 12 Volt Pump PASS
Balancer 150 Black Nickel PASS
S.1366 / 1156 Water Block PASS
G-Changer 240 PASS
Swiftech
Apogee XTL (will not be testing)
Apogee XT Extreme (will not be testing)
Koolance
Koolance CPU-370 (with out restriction plate) PASS
Koolance CPU-370 (with restriction plate) PASS
Laing
DDC 10 watt PASS
DDC 18 Watt PASS
D5 PASS
Confirmation from testers :
+ 2 to 3c above water (tester 1 & 2) PASS
Non blocking when using correct mix with correct block (tester 1 & 2) PASS
None conductive for 1 month --- only ive tested this out.
Testing complete
Next stage is refinement.
ETA
Announced
sorry they told me no when we asked for a sample block to test this liquid out on. There should be no reason why the Aurora + Will not work on it though as we have tested some of the best blocks on the market with this liquid and they all work.
quite a few company's consider us as competition and a threat to there products and refuse to work with us were as other's see the potential and a revival in the industry that is need to bring water cooling forwards.
were taking a massive gamble with aurora trying to bring some thing different to the market place that is not based on performance but based on looks. If you want more performance you simply add more radiators or keep an eye on mayhems for a bit longer because we are not going to do just coolants.
were taking a massive gamble with aurora trying to bring some thing different to the market place that is not based on performance but based on looks. If you want more performance you simply add more radiators or
keep an eye on mayhems for a bit longer because we are not going to do just coolants.love the video
cant wait to see these in action.
catch me on email mate. Ill send you some samples over to play with.
The pearl get's stuck in the parts of the res where dead water is. All so the pumps do not have a good over head pressure. Last but not least on the larger res there are air holes in the pump that suck in the pearl and then don't release it so the pearl ends up gathering in the pump and staying there.
It can easily be washed out afterwards how ever because this does happen it fails our tests. We do not advise new users to water cooling use these liquids. We do advise that you first learn your own system before hand and how water cooling works before using them.
in the video above in the blue liquid section im only using a 400 Ltr hour pump with ceramic bearing. as long as the pump is not submersed in a res i do not see a problem. (just checked the specs of the pump it will be fine)
Patience is a virtue.
Mick