Pre-order now! Corsair H80 and H100 Liquid CPU Coolers

bulldog147 · 3 Jun 2011 at 20:17

It look like that 240mm can fit into Antec 1200 case now:

<-click here

quakemaster · 3 Jun 2011 at 20:56

I"ll have to mount to the front of my case on right hand side, Mountain mods twin mobo 18" square case.
will have to mod if tubes not long enough to reach socket, I do love a challenge.

Boozebeard · 3 Jun 2011 at 23:41

I couldn't mount my rad on the back top fan when I had a 1200 because the fan is totally flush with the roof of the case.

griffo_001 · 4 Jun 2011 at 01:23

shadow_boxer said:
All these new all-in-one watercooling setups makes me wana make the jump to WC...so tempting...might be time to retire my Titan Fenrir and push my i7 920 a bit more!

If you do I'd be interested to see how you get on, I'm on the same set up, did have it at 4.2 but flashed my board and couldn't get it above 4 afterwards :confused:

My only issue is the Antec 300 its all housed in

Might have to take a dremel to the front and mount it front of the HDDs, that's the only way it'll fit

Either that or finally get a bigger and better case

antipesto93 · 4 Jun 2011 at 12:32

quakemaster said:
Got a corsair h100 on order @ 81.59 inc vat

Me too! and the ship date is end of next week

SirConfused · 4 Jun 2011 at 12:39

griffo_001 said:
Either that or finally get a bigger and better case

Just go all out and upgrade to a 1200. I've had mine for 2.5 years getting transported 200 miles 6 times a year and you can't even tell, well worth the money I spent on it.

Mr Krugga · 4 Jun 2011 at 13:28

Order placed, I hate myself now

antipesto93 · 4 Jun 2011 at 20:55

pre order price at the other place just went up by 10 pounds!

HighlandeR · 4 Jun 2011 at 21:38

Corsair need to make one for the GPU

antipesto93 · 4 Jun 2011 at 22:21

HighlandeR said:
Corsair need to make one for the GPU

Yeah, It could just be a h70, with modded backplates and longer tubing

or they could have a 360mm rad, and then have both cpu AND gpu blocks coming off it lol

Mr Krugga · 4 Jun 2011 at 22:24

antipesto93 said:
Yeah, It could just be a h70, with modded backplates and longer tubing

or they could have a 360mm rad, and then have both cpu AND gpu blocks coming off it lol

I'm sure that's where the market is heading towards atm

subbytna · 4 Jun 2011 at 22:58

tbh the difference from the h70 and the h80 isn't probably worth the money...just the new tech urge getting satisfied. the only really worthwhile upgrade is up to the h100

antipesto93 · 4 Jun 2011 at 23:06

subbytna said:
tbh the difference from the h70 and the h80 isn't probably worth the money...just the new tech urge getting satisfied. the only really worthwhile upgrade is up to the h100

Yeah probably, even the h70 will perform very closely to the h100.- thicker vs longer Rad.

I hope the h100 tops the best air cooler

Ecosse360 · 5 Jun 2011 at 01:31

These coolers look great

Michaeljcox24 · 6 Jun 2011 at 17:14

I think Antec may well shift a lot of 1200 cases thanks to Corsair

bulldog147 · 6 Jun 2011 at 17:38

The Antec 1200 case is outdated now and still well too expensive! No backplate cut, poor cable management in the back and poor side panel window (that 120mm had block many high end air cooler) and the HDD bays is rather annoying with so many screws on it and had to removed the bay too.

Michaeljcox24 · 6 Jun 2011 at 17:58

I agree about the price but think it's down to personal preference when this case is concerned. It's just a larger version of the 902, which I own, and quite honestly can't find any faults with. Good air flow, and I'm having no problems with cable management. The only thing that I could see being a possible problem is the brackets for the side fan getting in the way of the radiator. Possibly, dont know for sure, but just going on the fact the rad on my H50 in the 902 comes very close to touching the side fan blowing on the GPU.

V F · 8 Jun 2011 at 02:13

Someone has it.

http://www.corsair.com/blog/corsair-link-gaming-pc-build-log/

antipesto93 · 8 Jun 2011 at 10:04

^ looks good

Marine-RX179 · 8 Jun 2011 at 10:29

Just curious though...is there really a need for so many "improved" CPU cooler products, when the CPU architecture moving onto 32nm?

I mean take the SandyBridge CPU such as the 2500K and 2600K for example...they don't really run too hot, and since they will likely to get shorten lifespan/fried by high voltage (above 1.38 vcore), the voltage would be the limiting factor not the heat...

I still see some people doing higher than 4.6GHz on over 1.40 vcore...and I'm having serious doubt on if they CPU is gonna last, since the temp is not the issue for slowing killing the CPU...