Prime95 and Orthos freezing

JaseUK · 27 Jun 2007 at 10:06

Guys,
Having a bit of a problem getting both Prime95 and Orthos to run without it freezing.

Orthos gets about 30 seconds in and it totally freezes my machine and Prime95 does pretty much the same.

I have tried it with my machine overclocked and with it at stock but get the same results.

I am using Vista Ultimate 64bit.

ArchAnGeL · 27 Jun 2007 at 10:33

check your ram timings and run memtest to rule out a memory error

JaseUK · 27 Jun 2007 at 11:54

ArchAnGeL said:
check your ram timings and run memtest to rule out a memory error

I'll give it a go and report back

JaseUK · 27 Jun 2007 at 13:36

Well ran memtest86+ v1.70 and it does not report any errors. Well not after 30 mins of running ish.

My overclock is as follows on a P5WDH-Deluxe mobo: -

CPU
E6600 @ 3GHz, vcore 1.35v
FSB 333 x multi 9
temps are fine

RAM
Corsair XMS2 6400 C4
running at vdimm of 2.1v
4-4-4-12, FSB 4:5, frequency 416MHz

Rated FSB 1333MHz

all according to CPU-Z v1.40

ArchAnGeL · 27 Jun 2007 at 14:51

what is the command per clock (i.e. 1T ot 2T) set at?

I would suggest putting the ram at 1:1 until you get sorted at stock.

I'd recommend running memetest for 1-2 hours as well

JaseUK · 27 Jun 2007 at 17:59

ArchAnGeL said:
what is the command per clock (i.e. 1T ot 2T) set at?

I would suggest putting the ram at 1:1 until you get sorted at stock.

I'd recommend running memetest for 1-2 hours as well

Erm I dunno, where in the bios can you change this.

What should it be at

According to CPU-Z my memory is set at 2T