Results from Lapping & Ninja Vs Tuniq 120

Mr_T · 11 Jan 2007 at 19:39

Ok I have finally finished lapping my E6600 and after a little scare I have it up and running!!!

So whats changed?

Well previously with my Ninja & using the paste that comes with it my stock speed idle temp was 50 degrees

Now having lapped the cpu and got hold of AS5 paste & a tuniq 120 I got the following results...

Ninja Idle : 39 degrees
Tuniq Idle : 36 degrees

Ninja Load: 48 degrees
Tuniq Load: 43 degrees

Thats a pretty convincing case for both lapping & the Tuniq in my book!

I should mention that the tuniq fan is at 2000rpm and the Ninja was only doing 1300rpm & the Tuniq seems noisier

clone · 11 Jan 2007 at 20:33

Tuniq is about right, i lapped mine and run the fan @2000rpm 36c best cooler ive had

Lord Alibaski · 11 Jan 2007 at 21:11

Don't ya think if the Ninja ran @ 2000rpm you would be getting the same results? Seems logical too me.

Subliminal Aura · 12 Jan 2007 at 02:25

Lord Alibaski said:
Don't ya think if the Ninja ran @ 2000rpm you would be getting the same results? Seems logical too me.

I'd second that theres a hella lot of difference between running 1200 and 2000 please rerun the test preferably using the same fan also (cant remember if they are the sane though)

micky1up · 12 Jan 2007 at 20:24

whats lapping?

danoliver1 · 12 Jan 2007 at 20:35

Search button is your friend my friend

fornowagain · 12 Jan 2007 at 20:38

micky1up said:
whats lapping?

Something to do with dogs?

vairo · 12 Jan 2007 at 20:38

whats lapping?

yeah indeed i cant find translation for that word aswell !

And it is like 5th time i saw it !

Reality|Bites · 12 Jan 2007 at 20:46

Your temps still seems too high, My E6600 @3.3Ghz 1.4v idles 29-32C

I'm only using a thermalright XP-90 with a 92mm panaflo.

Reality|Bites · 12 Jan 2007 at 20:48

so what's the difference between lapping and sanding?

Street · 12 Jan 2007 at 20:50

Reality|Bites said:
Your temps still seems too high, My E6600 @3.3Ghz 1.4v idles 29-32C

Idle temps are pretty much irrelevant though, its load temps that matter.

I'm going to lap my 6300 tomorrow before I fit my new water cooling setup, should be interesting to see how much better it is.

Reality|Bites said:
so what's the difference between lapping and sanding?

Thats what lapping is, sanding down the base of your cooler or the IHS on the CPU to make it more flat.